Specialist techniques, tools, equipment and processes that can be used on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to shape, fabricate, construct and assemble a high-quality prototype — Edexcel GCSE Design and Technology
Specialist techniques, tools, equipment and processes that can be used on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to shape, fabricate, construct and assemble a high-quality prototype explained
These three techniques create hems and joins where the stitching is hidden or minimal on the right side.
Read the full explanation
Under-and-sewn means the hem is slip-stitched by hand so the stitches sit inside the fold and stay hidden. Blind hemming uses a machine (or hand) stitch that catches only a few fibres of the outer fabric, leaving an almost invisible line on the face. Invisible stitching conceals the join so no stitch shows on the right side, often used on facings and hems. Choosing between them depends on fabric, whether a machine is available and the finish the prototype needs. All three aim for a neat, strong, concealed result.
Your focus
- Identify under-and-sewn, blind hemming and invisible stitching as concealed techniques
- Explain how each technique hides stitching on the right side
- Select and justify a concealed-stitch method for a given prototype
Specialist techniques, tools, equipment and processes that can be used on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to shape, fabricate, construct and assemble a high-quality prototype exam tips
Marking Points
- Describes under-and-sewn as a hand slip stitch that hides stitches within the hem fold
- Explains blind hemming as a stitch that catches only a few outer fibres to leave a near-invisible line
- Describes invisible stitching as concealing the join so no stitch shows on the right side
- Compares the techniques by visibility, strength and suitability for a named fabric
- Selects an appropriate concealed-stitch method for a prototype and justifies the choice
Examiner Tips
- 💡State whether each technique is done by hand or machine where relevant
- 💡Link the technique to the aim of a hidden, neat finish on the right side
- 💡Justify your choice using fabric type and the required strength of the prototype
Common Mistakes
- Treats blind hemming and invisible stitching as identical; distinguish the machine blind hem from fully concealed stitching
- Assumes concealed stitches are always strongest; recognise that hidden stitches may be less secure than a visible seam
- Ignores fabric type when choosing a method; match the technique to weight and weave