Skip to course topics

    Edexcel GCSE Design and Technology

    Explore your course, one topic at a time.

    Course overview

    The PEARSON-EDEXCEL GCSE Design and Technology specification covers 73 study areas with 2732 learning objectives (1DT0). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.

    • 73 study areas
    • 2732 learning objectives
    3,085
    practice questions
    908
    teaching notes
    73
    topics

    Your exams

    • Component 1: MetalsTuesday, 15 June 2027, PM
    • Component 1: Papers and boardsTuesday, 15 June 2027, PM
    • Component 1: PolymersTuesday, 15 June 2027, PM
    • Component 1: SystemsTuesday, 15 June 2027, PM
    • Component 1: TextilesTuesday, 15 June 2027, PM
    • Component 1: TimbersTuesday, 15 June 2027, PM

    Always confirm dates and times with your exam centre.

    Papers on this course
    PaperTimeMarksWeight
    Component 2: Iterative Design Challenge-10050%
    Component 1: Written examination105 min10050%
    Component 1: Written examination105 min10050%
    Component 1: Written examination105 min10050%
    Component 1: Written examination105 min10050%
    Component 1: Written examination105 min10050%
    Component 1: Written examination105 min10050%

    Explore your topics

    73 study areas

    Qualification aims and objectives1 topic
    Component 1: Core content18 topics

    12 of 18 shown

    Component 1: Material category options43 topics

    12 of 43 shown

    Iterative Design Challenge (NEA)11 topics
    About this course

    About Pearson Edexcel GCSE Design and Technology

    This Pearson Edexcel GCSE in Design and Technology offers a broad and coherent course of study that enables students to apply their creativity and technical knowledge to design and make high-quality products. The specification is built around the core principles of design and technology, with a strong emphasis on iterative design processes, user-centred design, and the impact of new and emerging technologies.

    Students will develop a deep understanding of materials, components, and manufacturing processes, alongside the skills to analyse and evaluate design contexts. The course is structured to balance theoretical knowledge with practical application, culminating in a substantial non-examined assessment (NEA) where students undertake a design-and-make project of their own choice, demonstrating their ability to work through the iterative design cycle.

    Assessment Structure

    The Pearson Edexcel GCSE in Design and Technology is assessed through two components. Paper 1 is a written examination worth 50% of the qualification, lasting 1 hour and 45 minutes, and carries 100 marks. It comprises two sections: Section A assesses core technical principles and designing and making principles (40 marks), while Section B includes a longer-answer question on a specified contextual challenge (60 marks). The second component is a non-examined assessment (NEA), also worth 50% (100 marks), where students complete a design-and-make task set by the exam board, producing a portfolio of evidence and a final prototype. The NEA is internally assessed and externally moderated.

    Why Choose Pearson Edexcel?

    • The Edexcel specification is known for its clear and logical structure, with a strong focus on the iterative design process, which helps students develop a systematic approach to problem-solving that is highly valued in higher education and industry.
    • The NEA component offers a high degree of freedom, allowing students to choose their own design context and project, which can be tailored to their personal interests and strengths, making the course more engaging and relevant.
    • Edexcel provides a wealth of support resources, including past papers, mark schemes, and examiner reports, which are invaluable for students preparing for the final examination and for teachers delivering the course.

    Frequently Asked Questions

    What is the difference between the written exam and the NEA in Edexcel GCSE Design and Technology?
    The written exam (Paper 1) is worth 50% of your final grade and tests your theoretical knowledge of design and technology, including core and specialist principles. It includes a section where you respond to a contextual challenge with a design solution. The NEA (non-examined assessment) is also worth 50% and is a practical design-and-make project where you choose your own context, research, design, manufacture, and evaluate a prototype. The NEA allows you to demonstrate your creativity and practical skills over an extended period, while the exam assesses your ability to recall and apply knowledge under timed conditions.
    How much time should I spend on the NEA project for Edexcel GCSE D&T?
    The NEA is a substantial piece of work, and the exam board recommends approximately 35 hours of supervised time to complete it. This includes research, designing, making, and evaluating. You should plan your time carefully, breaking the project into stages, and ensure you keep a detailed design portfolio that documents your iterative process. It's important to balance your time between the written exam preparation and the NEA, as both are equally weighted at 50%.
    Can I choose any material or topic for my NEA project in Edexcel GCSE D&T?
    Yes, the NEA allows you to choose a design context from a range set by the exam board, but within that context you have the freedom to select the materials and processes you want to use. You should choose materials that you are confident working with and that are appropriate for your design. The specification encourages you to work with a variety of materials, but you will focus on one or two in depth for your project. Make sure you consider the availability of resources in your school's workshop.
    Are there any maths or science skills required for Edexcel GCSE Design and Technology?
    Yes, the Edexcel GCSE D&T specification includes a minimum of 15% mathematical content and 10% science content in the written exam. You will need to apply maths skills such as calculating quantities, using ratios, and interpreting data, as well as science principles like the properties of materials and forces. These skills are integrated into the exam questions, so it's important to practise applying them in a design and technology context.
    What career paths can Edexcel GCSE Design and Technology lead to?
    Studying D&T at GCSE can open doors to A-levels in Design and Technology, Product Design, or Engineering, and eventually to degrees in fields like industrial design, architecture, engineering, and fashion. It also develops transferable skills such as problem-solving, creativity, and project management, which are valuable in many careers. The practical and theoretical knowledge you gain is particularly useful for apprenticeships in design and manufacturing industries.
    Assessment and exam guidance

    What Gets Top Grades

    A*/Grade 9

    Knowledge & Understanding

    Demonstrates comprehensive and accurate knowledge

    • Uses correct subject-specific terminology
    • Shows detailed understanding of concepts
    • Makes accurate connections between topics
    • Demonstrates depth beyond surface-level knowledge

    Application

    Applies knowledge effectively to new contexts

    • Selects relevant knowledge for the question
    • Adapts understanding to unfamiliar scenarios
    • Uses examples appropriately
    • Shows awareness of context

    Analysis & Evaluation

    Develops sophisticated analytical arguments

    • Constructs logical chains of reasoning
    • Considers multiple perspectives
    • Weighs evidence to reach justified conclusions
    • Acknowledges limitations and nuances

    Key Command Words

    Pearson Edexcel
    State
    1 mark

    Give a single fact or term

    Identify
    1 mark

    Name, select, or recognise

    Outline
    2 marks

    Set out main features briefly

    Describe
    2-4 marks

    Give an account of what something is like or what happens

    Explain
    3-6 marks

    Give reasons with developed cause→effect chains

    Compare
    2-4 marks

    State similarities AND differences (both required)

    Analyse
    6-9 marks

    Examine in detail showing cause→effect→consequence chains

    Evaluate
    6-12 marks

    Weigh up BOTH sides, reach JUSTIFIED conclusion

    Assess
    6-12 marks

    Make judgments about importance with justification

    Calculate
    2-4 marks

    Show formula→substitution→calculation→answer with units

    Tips and common mistakes

    Common Exam Mistakes

    Pitfalls to avoid in your exams

    • •Treats context as background decoration rather than a force that shapes design decisions; name the specific influence and the decision it changed.
    • •Assumes a good idea succeeds regardless of cost, materials or user circumstances; check each proposal against the real constraints of its context.
    • •Describes a product's features without linking them to the users, market or regulations that produced them; connect each feature to a contextual factor.
    • •Treats wants as needs without checking evidence; separate what users must have from what they would prefer and justify each.
    • •Produces proposals that ignore cost, materials or manufacture; test each idea against practical constraints before presenting it.
    • •Offers ideas with no link to research; show which finding about users prompted each proposal.
    • •Treats the first idea as the final design; generate several alternatives and record why you moved beyond the initial one.
    • •Describes experimentation without doing it; make and photograph physical or digital trials so the evidence is real.

    Top Examiner Tips

    Expert advice for exam success

    • •Before analysing any product or case study, write a short context list covering user, economic, environmental, legal and technical factors, then refer back to it.
    • •When you make a design decision in your own work, record the contextual reason beside it so you can explain the influence later.
    • •Use specific evidence from the case or your project rather than general statements that design is affected by the world around it.
    • •Gather evidence about users before proposing solutions, and quote or summarise that evidence when justifying a proposal.
    • •For each proposal, write one sentence naming the need, want or value it serves and one naming the constraint it respects.
    • •Check feasibility early by listing materials, processes and approximate costs so unrealistic ideas are revised rather than defended.
    • •Annotate every sketch with what you were trying to find out, so experimentation is visible to an assessor.
    • •Keep dated records of trials and revisions; a clear sequence shows development rather than a single leap.

    Ready for a little practice?

    Create your account to start practising Design and Technology.

    Start free

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge