Skip to course topics

    CABWI Vocational Manufacturing & Engineering

    Explore your units, one topic at a time.

    Course overview

    The CABWI Vocational Manufacturing & Engineering specification covers 27 topics with 106 learning objectives (600/2051/9). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.

    • 27 topics
    • 106 learning objectives
    Ofqual Regulated: 600/2051/9
    Course version · 600/2051/9Version from Sept 2020Change version

    Choose your course version: the course code is on your timetable or a past paper. Not sure? We’ll start you on the most likely version when you sign up.

    Official Regulatory Specification

    Regulated by the Office of Qualifications and Examinations Regulation (Ofqual) in England

    View on Ofqual Register (opens the official government register in a new tab)
    Qualification Number (QN)
    600/2051/9
    Awarding Organisation
    CABWI
    Regulatory Type
    Occupational Qualification
    National Level & Units
    Vocational • 27 units
    Sector Subject Area: Engineering
    This qualification is officially accredited under the national framework. Credits and certified outcomes are recognised by employers, further education colleges, and training providers throughout the UK.
    27
    topics

    Qualification Units

    27 units

    How this qualification is graded

    Assessment follows the awarding organisation’s published requirements. Check the exact unit methods and grading rules with your provider.

    About this course

    About CABWI Vocational Manufacturing & Engineering

    The CABWI End-Point Assessment in Manufacturing & Engineering evaluates apprentices operating in specialised process industries, utility engineering, and industrial operations. Designed to test real-world occupational competence, the assessment confirms that apprentices can safely maintain, fault-find, and operate complex mechanical, electrical, and process plant equipment to rigorous industry standards.

    The assessment framework focuses on three core pillars: comprehensive health, safety, and environmental compliance, technical asset maintenance and diagnostics, and effective operational communication. Through structured assessment methods, CABWI ensures that apprentices transition seamlessly from structured training to fully autonomous engineering technicians trusted across UK infrastructure.

    Assessment Structure

    The CABWI End-Point Assessment typically comprises three integrated assessment components completed after passing the Gateway stage: a closed-book multiple-choice or short-answer technical knowledge test, an extensive practical observation conducted in an operational or simulated workplace setting, and a structured professional discussion underpinned by the apprentice's portfolio of workplace evidence. Each component evaluates specific Knowledge, Skills, and Behaviours (KSBs), contributing toward an overall grade of Fail, Pass, or Distinction.

    Why Choose CABWI?

    • CABWI is the premier specialist awarding organisation for the water, utilities, and continuous process manufacturing sectors, providing assessment standards deeply aligned with UK industrial demands.
    • Assessments are led by vetted industry professionals who bring active engineering expertise, ensuring that technical evaluations are realistic, fair, and relevant to modern workplace equipment.
    • The qualification is tailored around critical compliance and high-consequence safety protocols, delivering industry-recognised certification that enhances long-term employability in regulated engineering fields.

    Frequently Asked Questions

    What is a CABWI End-Point Assessment in Manufacturing and Engineering?
    A CABWI End-Point Assessment (EPA) is the final, independent evaluation that an apprentice completes at the conclusion of their apprenticeship standard. Unlike modular qualifications where units are assessed throughout the course, the EPA takes place after the Gateway phase to holistically verify that you have mastered all required Knowledge, Skills, and Behaviours (KSBs) to work independently as a qualified engineering technician.
    What happens during the practical observation component of the CABWI EPA?
    During the practical observation, an independent CABWI technical assessor observes you carrying out authentic maintenance, inspection, or diagnostic tasks on real engineering plant machinery. You will be evaluated on your adherence to standard operating procedures, safe isolation protocols, tool selection, fault identification, and clean handover routines. You may also be asked targeted verbal questions during or immediately following the observation to verify your decision-making rationale.
    How is the apprentice portfolio of evidence used during the assessment?
    Your portfolio is compiled during your on-programme training and submitted at Gateway, but it is not graded directly on its own. Instead, the independent assessor reviews the portfolio beforehand and uses your documented job logs, technical write-ups, and witness testimonies as the foundation for the professional discussion. It provides the concrete evidence you will refer back to during the interview to showcase how you meet specific distinction-level criteria.
    Can I achieve a Distinction grade in my CABWI Engineering EPA?
    Yes, apprentices can achieve a Pass or a Distinction, provided they meet the specific grading criteria set out in the apprenticeship assessment plan. To secure a Distinction, an apprentice must systematically demonstrate higher-level technical insight, proactive problem-solving, root-cause analysis, and leadership in safety and continuous improvement across the individual assessment components.
    What happens if I fail one component of the CABWI End-Point Assessment?
    If you do not meet the pass mark for a particular component, you will receive constructive feedback detailing which KSB criteria were not satisfied. In most cases, you are permitted to resit or retake only the failed component within an agreed resit window, rather than having to repeat the entire assessment package from scratch. Your training provider and employer will work with you to arrange targeted revision and support before scheduling the retake with CABWI.

    Ready for a little practice?

    Create your account to start practising Manufacturing & Engineering.

    Start free

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge