EngEPA Vocational Manufacturing & Engineering
Explore your units, one topic at a time.
Course overview
The ENGEPA Vocational Manufacturing & Engineering specification covers 1 topic with 2 learning objectives (610/1171/X). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.
- 1 topic
- 2 learning objectives
Course version · 610/1171/XVersion from Sept 2020Change version
Choose your course version: the course code is on your timetable or a past paper. Not sure? We’ll start you on the most likely version when you sign up.
- Version from Sept 2020610/6454/3 · EngEPA Level 2 Engineering and Manufacturing Foundation Apprenticeship
- Version from Sept 2020610/1171/X · EngEPA Level 3 Metal Fabricator EPA
- Version from Sept 2020610/1169/1 · EngEPA Level 2 General Welder (arc processes) EPA
- Version from Sept 2020610/1173/3 · EngEPA Level 3 Plate Welder EPA
- Version from Sept 2020610/1168/X · EngEPA Level 2 Engineering Operative EPA
- Version from Sept 2020610/1170/8 · EngEPA Level 3 Engineering Fitter EPA
- Version from Sept 2020610/6451/8 · EngEPA Level 3 Machining Technician Level 3
- Version from Sept 2020610/6453/1 · EngEPA Level 3 Engineering Maintenance Technician - dual discipline Level 3
- Version from Sept 2020610/6452/X · EngEPA Level 3 Engineering Maintenance Technician - single discipline Level 3
- Version from Sept 2020610/2047/3 · EngEPA Level 2 Maritime Mechanical & Electrical Mechanic EPA
- Version from Sept 2020610/1442/4 · EngEPA Level 3 Maintenance and Operations Engineering Technician EPA
- Version from Sept 2020610/4706/5 · EngEPA Level 3 Lifting Equipment Technician Level 3
- Version from Sept 2020610/1172/1 · EngEPA Level 3 Pipe Welder EPA
- Version from Sept 2020610/1599/4 · EngEPA Level 3 Multi-Positional Welder EPA
Official Regulatory Specification
Regulated by the Office of Qualifications and Examinations Regulation (Ofqual) in England
- Qualification Number (QN)
- 610/1171/X
- Awarding Organisation
- EngEPA
- Regulatory Type
- End-Point Assessment
- National Level & Units
- Vocational • 1 unit
- 1
- topics
Qualification Units
How this qualification is graded
Assessment follows the awarding organisation’s published requirements. Check the exact unit methods and grading rules with your provider.
About this course
About EngEPA Vocational Manufacturing & Engineering
The EngEPA Apprenticeship Assessment Qualification in Manufacturing & Engineering is a work-based, end-point assessment (EPA) qualification designed for apprentices who have completed their Engineering Manufacturing Technician or similar apprenticeship standard. Unlike traditional academic qualifications, it assesses your occupational competence against the knowledge, skills and behaviours (KSBs) defined by employers in the manufacturing and engineering sector. The specification is structured around three core components: a professional discussion underpinned by a portfolio of evidence, a practical observation in the workplace, and a written or project-based technical assessment.
Throughout the qualification, you will develop and demonstrate expertise in areas such as engineering principles, manufacturing processes, quality assurance, health and safety, and continuous improvement. The assessment is graded at pass, merit or distinction, with each grade reflecting the depth of your technical understanding and your ability to apply it independently in a real engineering environment. The EngEPA specification is deliberately flexible, allowing apprentices from mechanical, electrical, and maintenance backgrounds to tailor their evidence to their specific job role while still meeting the rigorous national standard.
Assessment Structure
The EngEPA Manufacturing & Engineering end-point assessment consists of three distinct components, each typically weighted equally at 33.3% of the total qualification. Component 1 is a professional discussion (usually 60-90 minutes) based on a portfolio of evidence you compile during your apprenticeship; Component 2 is a practical observation (typically 4-6 hours) where an independent assessor watches you carry out a complex manufacturing or engineering task in your workplace; Component 3 is a technical project or written assessment (often 3-4 hours under controlled conditions) covering engineering theory, calculations, and problem-solving. There are no traditional written exam papers in the academic sense; instead, all assessment is criterion-referenced against the apprenticeship standard. Total marks vary by standard but are usually in the range of 100-120 marks, with a pass typically set at 60%, merit at 75%, and distinction at 85%. All three components must be passed to achieve the overall qualification.
Why Choose EngEPA?
- EngEPA is the only end-point assessment organisation dedicated exclusively to engineering and manufacturing apprenticeships, meaning its assessment materials and scenarios are written by current industry practitioners rather than generalist exam writers. This ensures every task you face is directly relevant to the shop floor, design office, or maintenance bay.
- Unlike broader awarding bodies, EngEPA offers a single, streamlined specification that maps precisely to the latest employer-led apprenticeship standards (such as ST0457 Engineering Manufacturing Technician). This reduces ambiguity for both apprentices and training providers, as there is no confusion over which pathway or optional unit to follow.
- EngEPA provides extensive free support resources, including sample assessment materials, portfolio templates, and recorded Q&A webinars, which are updated each academic year to reflect changes in technology and legislation. This level of transparency and support is rarely matched by larger, multi-sector awarding organisations.
Frequently Asked Questions
What is the difference between EngEPA and other end-point assessment organisations for manufacturing and engineering apprenticeships?
How is the EngEPA Manufacturing & Engineering qualification graded, and what do I need to pass?
Do I need to complete a portfolio of evidence for the EngEPA professional discussion?
Can I take the EngEPA assessment if I have not completed a formal apprenticeship?
What support does EngEPA provide to help me prepare for the assessment?
Ready for a little practice?
Create your account to start practising Manufacturing & Engineering.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge