NSAN End-Point Assessment Manufacturing & Engineering
Explore your units, one topic at a time.
Course overview
The NSAN End-Point Assessment Manufacturing & Engineering specification covers 1 topic with 2 learning objectives (610/6518/3). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.
- 1 topic
- 2 learning objectives
Course version · 610/6518/3Version from Sept 2020Change version
Choose your course version: the course code is on your timetable or a past paper. Not sure? We’ll start you on the most likely version when you sign up.
- Version from Sept 2020610/2777/7 · NSAN Level 3 Maintenance and Operations Engineering Technician
- Version from Sept 2020610/1275/0 · NSAN Level 5 Nuclear Technician End Point Assessment
- Version from Sept 2020610/3855/6 · NSAN Level 6 Project Controls Professional
- Version from Sept 2020610/6518/3 · NSAN Level 2 Nuclear Operative (V1.1) End Point Assessment
- Version from Sept 2020610/6150/5 · NSAN Level 2 Nuclear Health Physics Monitor End Point Assessment V1.1
- Version from Sept 2020610/3854/4 · NSAN Level 3 Project Controls Technician
Official Regulatory Specification
Regulated by the Office of Qualifications and Examinations Regulation (Ofqual) in England
- Qualification Number (QN)
- 610/6518/3
- Awarding Organisation
- NSAN
- Regulatory Type
- End-Point Assessment
- National Level & Units
- End-Point Assessment • 1 unit
- 1
- topics
Qualification Units
How this qualification is graded
Assessment follows the awarding organisation’s published requirements. Check the exact unit methods and grading rules with your provider.
About this course
About NSAN End-Point Assessment Manufacturing & Engineering
The NSAN End-Point Assessment for Manufacturing & Engineering is a work-based qualification designed for apprentices and learners who are already employed in the engineering and manufacturing sector. It focuses on the practical skills, technical knowledge, and behaviours required to operate effectively in roles such as machinist, maintenance technician, or production engineer. The assessment is structured around the apprenticeship standard, ensuring that learners demonstrate competence in real-world tasks rather than just theoretical understanding.
Key themes include health and safety, engineering principles, quality assurance, and continuous improvement. The specification is divided into core knowledge modules, practical skills units, and behavioural competencies, all assessed through a combination of on-the-job observation, professional discussion, and written tests. This holistic approach ensures that learners are fully prepared for the demands of modern manufacturing environments.
Assessment Structure
The NSAN End-Point Assessment is typically composed of three main components: a multiple-choice knowledge test, a practical observation in the workplace, and a professional discussion supported by a portfolio of evidence. The knowledge test usually carries a weighting of around 20-30%, the practical observation 40-50%, and the professional discussion 20-30%, though exact weightings can vary by specific apprenticeship standard. There are no traditional written exam papers; instead, assessment is continuous and integrated with the learner's job role. Total marks are not fixed, as grading is often pass/merit/distinction based on holistic performance across all components.
Why Choose NSAN?
- NSAN is the National Skills Academy for Nuclear and Manufacturing, so its assessments are highly regarded by employers in these sectors, giving learners a competitive edge in the job market.
- The assessment is entirely work-based, meaning learners can earn while they learn and demonstrate their skills in a real environment rather than in a classroom, which suits hands-on learners.
- NSAN works closely with industry to ensure the assessment reflects current practices and technologies, so learners gain relevant, up-to-date skills that employers need.
Frequently Asked Questions
What is the NSAN End-Point Assessment and how does it differ from traditional exams?
How is the NSAN Manufacturing & Engineering assessment graded?
Can I take the NSAN assessment if I am not currently employed in manufacturing?
What support is available to help me prepare for the NSAN End-Point Assessment?
How long does the NSAN End-Point Assessment take to complete?
Ready for a little practice?
Create your account to start practising Manufacturing & Engineering.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge