Skip to topic
    ← Back to course topics

    Adjust signalling components and equipment to meet operational requirements — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with your organisation's procedures, following the health and safety legislation, regulations and safe working practices and procedures, from the following as applicable to the work location and activities:1.1 organisation's safety management system1.2 relevant sections of the HASWA1.3 COSHH1.4 safe work plans1.5 track access restrictions1.6 track work instructions1.7 track possession1.8 task risk control sheets1.9. current rule book1.10 regulations for working under OHLE and in the vicinity of DC lines (where appropriate)1.11 equipment disconnections1.12 manual handling regulations1.13 RIDDOR1.14 safety sign regulations1.15 PPE2.
    2. Identify and analyse any necessary changes to safety requirements on arriving at site, including prompt reporting to the relevant person(s) related to access to two of the following types of site locations:2.
    3. internal (such as signal box, equipment room)2.
    Show all 20 objectives
    1. areas to which the public have access2.
    2. confined spaces2.
    3. elevated structures3.
    4. Identify the area of work and the components/equipment which is to be adjusted and adjust one of the following types of signalling equipment:3.
    5. train control (such as signals or other method of authorising train movements)3.
    6. train detection (such as track circuits or axle counters)3.
    7. power supplies3.
    8. other industry specific signalling equipment ref: ()4. Source and interpret the appropriate documentation and operating specifications for the equipment being adjusted to ensure that the adjustment complies with one of the following:4.1 infrastructure guidelines and standard operating procedures4.2 equipment manufacturer's documents4.3 BS, ISO and/or BS EN standards4.4 SMTH4.5 other industry specific signal standards/specifications: ref: ( )5.
    9. Identify and correctly use the relevant tools, test equipment and measuring instruments as applicable to the equipment being maintained:5.1 power tools5.2 hand tools5.3 torque wrenches5.4 wire and cable strippers5.5 IDC tools (such as punch down tool)5.6 crimping tools5.7 multi-meters5.8 adjustment equipment5.9 measuring equipment5.10 alignment equipment5.11 test equipment5.12 other specific signalling maintenance tools/equipment: ref: ()6.
    10. Carry out adjustments as applicable to the equipment being maintained and within the limits of your own authority:6.
    11. electrical measurements and adjustments6.
    12. electronic measurements and adjustments6.
    13. mechanical measurements and adjustments6.
    14. other specific signalling adjustment activity: ref: ( )7.
    15. Carry out the required adjustments in the specified sequence and in an agreed timescale8. Confirm that the adjusted components/equipment meet the required operating specification9.
    16. Complete the relevant integrity checks in line with your organisation's procedures10.
    17. evaluate and report any instances where the equipment fails to meet the required performance after adjustments or where there are identified defects outside the required adjustments11.

    Adjust signalling components and equipment to meet operational requirements assessment help

    Unit assessment details

    Loading assessment details…