Skip to topic
    ← Back to course topics

    Replace traction and rolling stock communication-electronic systems — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
    2. Follow the relevant maintenance schedules to carry out the required work
    3. Use the correct tools and equipment for the replacement operations and check that they are in a safe and usable condition
    Show all 20 objectives
    1. Carry out all of the following during the replacement activity:4.
    2. obtain and use the correct issue of company publications and planning documentation4.
    3. adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work4.
    4. check the calibration dates of tools and test equipment to be used4.
    5. use approved removal/installation techniques and procedures at all times4.
    6. provide and maintain safe access and working arrangements to the work area4.
    7. dispose of waste items in a safe and environmentally acceptable manner, and leave the work area in a safe conditionReplace, position and secure the equipment and components in accordance with the specificationReplace systems that contain four communication-electronic subsystems or assemblies, at least two of which must be selected from group A:Note: Any of the items below can be identified as a system, subsystem or assembly in its own rightgroup A - communication electronic:6.1 transmitters6.2 transceivers6.3 receivers6.4 aerial systems6.5 radar systems6.6 staff communication systems (such as GSMR, PA, cab to cab)6.7 train control systems (such as AWS, ATP, TPWS, ERTMS)6.8 data transmission lines (such as fibre optics, coaxial, baluns, twin wire)6.9 display systems (such as crew and passenger information)6.10 driver-machine interface6.11 optical systems (such as CCTV)6.12 built-in test equipment6.13 data net
    8. work systems (such as LANs, WANs)6.14 data net
    9. work interfaces (such as switches, router, bridging networks)6.15 any other identifiable electronic system, subsystem or assemblies to Line Replaceable Unit (LRU) level: ref: ( )group B - associated equipment:6.16 environmental control systems (such as temperature, alarms, fire protection, fire suppression)6.17 electromechanical systems (such as servos, motors, relays, complex switches)6.18 power generation systems (such as AC/DC generators, batteries)6.19 power distribution systems (such as single phase/3-phase distribution panels, shore connections)6.20 traction supply control systems (such as inverters, rectifiers, regenerative braking)6.21 monitoring systems (such as On Train Data Recorder (OTDR))6.22 hybrid systems (such as ADC, DAC)
    10. Use all of the following methods and techniques:7.
    11. taking ESD precautions7.
    12. disconnection7.
    13. levelling and aligning 7.
    14. earth bonding7.
    15. securing and lockingDisconnect/connect three of the following types of mechanical securing connections8.
    16. threaded fasteners 8.
    17. locking devices 8.

    Replace traction and rolling stock communication-electronic systems assessment help

    Unit assessment details

    Loading assessment details…