Skip to topic
    ← Back to course topics

    Carry out maintenance activities on electrical equipment — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with health and safety and other relevantregulations, directives and guidelines
    2. Demonstrate the required behaviours in line with the job role and companyobjectives
    3. Lead a maintenance team by carrying out all the following:1.1 communicate the maintenance activities to the team1.2 involve the team in planning how the maintenance activities will beundertaken1.3 allocate specific maintenance activities to each team member1.4 involve the team in identifying improvements that could be made to themaintenance process and/or procedures1.5 encourage the team and/or individuals to take the lead whereappropriate
    Show all 12 objectives
    1. Produce and update relevant maintenance schedules and plans
    2. Review and update maintenance procedures and plans to include three of thefollowing:2.1 preventive maintenance (routine inspections, and adjustments)2.2 corrective maintenance (activities identified from preventativemaintenance activities)2.3 predictive maintenance (analysis of the equipment’s condition)2.4 reactive maintenance (unexpected equipment/component failure)2.5 maintenance prevention (equipment/component design anddevelopment)Plus supporting documentation associated with two of the following:2.6 equipment performance2.7 equipment downtime/failure2.8 overall equipment effectiveness (OEE)2.9 maintenance costs2.10 health and safety2.11 staff development and training2.12 maintenance procedures/instructions2.13 operator manuals/working instructions2.14 regulatory compliance
    3. Lead maintenance activities within the limits of their personal authority
    4. Carry out the maintenance activities in the specified sequence and in an agreedtimescalePage 3 of 9REATC4-025 Issue 1.0S3 Collect fault diagnostic evidence from four of the following sources:3.1 the person or operator who reported the fault3.2 recording devices3.3 test instrument measurements (such as watt meters, multimeter, earthloopimpedance testers)3.4 sensory input (sight, sound, smell, touch)3.5 plant/equipment records3.6 circuit meters (such as voltmeter, power factor meter, ammeter)3.7 condition of end product3.8 equipment self-diagnostics
    5. Use a range of fault diagnostic techniques, to include two of the following:4.1 half-split technique4.2 input/output technique4.3 emergent sequence4.4 injection and sampling4.5 unit substitution4.6 six point technique4.7 function/performance testing4.8 equipment self-diagnostics
    6. Use a variety of diagnostic aids and equipment to include two of the following:5.1 logic diagrams5.2 equipment self-diagnosis5.3 troubleshooting guides5.4 flow charts or algorithms5.5 fault analysis charts (such as fault trees)5.6 electronic aids5.7 manufacturers' manuals
    7. Use all of the following fault diagnosis procedures:6.1 inspection (such as breakages, wear/deterioration, signs of overheating,missing parts, loose fittings)6.2 operation (such as manual switching off and on, RCD test buttons,automatic switching/timing/sequencing, desired outputs)6.3 measurement (such as voltage, current, continuity, power, temperature,luminescence)S7 Use three of the following types of test equipment to aid fault diagnosis:7.1 multimeter7.2 watt meter7.3 voltmeter7.4 ammeter7.5 earth-loop impedance tester7.6 insulation resistance tester7.7 portable appliance testerPage 4 of 9REATC4-025 Issue 1.07.8 light meter7.9 other specific test equipment
    8. Find faults that have resulted in two of the following breakdown categories:8.1 intermittent problem8.2 partial failure/out-of-specification output8.3 complete breakdowns
    9. Carry out all of the following during the maintenance activity:9.1 obtain and use the correct issue of company and/or manufacturer’sdrawings and maintenance documentation9.2 adhere to procedures or systems in place for risk assessment, COSHH,personal protective equipment and other relevant safety regulations andprocedures to realise a safe system of work9.3 ensure the safe isolation of equipment (such as mechanical, electricity,gas, air or fluids)9.4 prov

    Carry out maintenance activities on electrical equipment assessment help

    Unit assessment details

    Loading assessment details…