Skip to topic
    ← Back to course topics

    Maintain traction and rolling stock water supply and effluent waste systems and equipment — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
    2. Follow the relevant equipment maintenance schedules to carry out the required work
    3. Carry out all of the following during the system maintenance activities:3.1 plan and communicate the maintenance activities to ca
    Show all 15 objectives
    1. use minimal disruption to normal working3.2 obtain and use the correct issue of company and/or manufacturers' drawings and maintenance documentation3.3 adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work3.4 ensure correct authorization to work on air conditioning system are in place3.5 ensure the safe isolation of equipment (such as mechanical, electricity, heating, and air sources)3.6 provide and maintain safe access and working arrangements for the maintenance area3.7 warn others in the maintenance area if they are at risk of injury from the system being tested3.8 carry out the maintenance activities using appropriate techniques and procedures
    2. Carry out the system maintenance activities within the limits of your personal authority
    3. Carry out the system maintenance activities in the specified sequence and in an agreed time scale
    4. Report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
    5. Carry out maintenance activities on two of the following types of water system:7.
    6. Carry out all of the following maintenance techniques, as appropriate to the equipment being maintained:8.1 dismantling equipment to unit/sub-assembly level 8.2 dismantling units to component level8.3 setting, aligning and adjusting replaced components 8.4 checking components for serviceability8.5 marking/labelling of components 8.6 replacing all `lifed' items (such as filters, seals, gaskets) 8.7 replacing damaged/defective components8.8 making checks before re-connecting system8.9 tightening fastenings to the required torque8.10 functionally testing completed system
    7. Maintain and/or replace a range of water supply and waste equipment/components, to include twelve of the following: 9.1 pumps 9.2 interceptors 9.3 controlled emissions tanks (CET)9.4 supply tanks9.5 waste water tanks9.6 gaskets/seals9.7 motors 9.8 plastic pipe 9.9 manifolds 9.10 faucets9.11 valves/mixers9.12 copper pipe9.13 traps 9.14 control devices9.15 couplings/connectors9.16 steel pipe9.17 filters9.18 electrical wiring9.19 heaters9.20 pump chambers 9.21 flexible pipe 9.22 sensors9.23 sterilisers 9.24 electrical connectors9.25 macerators 9.26 gauges/indicators 9.27 switches9.28 ancillary equipment (such as sinks, toilets, showers)
    8. Maintain waste water distribution systems in compliance with one of the following:10.1 organisational guidelines and codes of practice 10.2 equipment manufacturer's operation range 10.3 BS, ISO and/or BS EN standards10.4 company standard operating procedures (SOP’s)10.5 documents such as technical procedures, vehicle maintenance instructions, vehicle overhaul instructions, workshop overhaul standards specifications
    9. Complete relevant system maintenance records accurately and pass them on to the appropriate person
    10. Complete the relevant paper
    11. work/record from one of the following, and pass it to the appropriate people:12.1 job cards12.2 maintenance log or report12.3 permits to work/formal risk assessment and/or sign-on/off procedures12.4 company-specific documentation12.5 electronic recordsDispose of waste materials in accordance with safe working practices and approved procedures
    12. work/record from one of the following, a

    Maintain traction and rolling stock water supply and effluent waste systems and equipment assessment help

    Unit assessment details

    Loading assessment details…