Test traction and rolling stock communication-electronic systems — EAL Vocational Motor Vehicle & Transport
Learning outcomes
- Work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- Follow the appropriate procedures for use of tools and equipment to carry out the required tests
- Carry out all of the following during the testing activities:3.1 plan the testing activities to ca
Show all 9 objectives
- use minimal disruption to normal working3.2 obtain and use the correct issue of company and/or manufacturers' drawings and maintenance documentation3.3 adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work3.4 ensure the safe isolation of equipment3.5 provide and maintain safe access and working arrangements for the maintenance area3.6 warn others in the maintenance area if they are at risk of injury from the system being tested3.7 carry out the testing activities using appropriate techniques and procedures3.8 take electrostatic precautions when handling components and circuit boards3.9 re-connect and return the equipment to service on completion of the testing activities3.10 dispose of waste items in a safe and environmentally acceptable manner, and leave the work area in a safe conditionSet up and carry out the tests using the correct procedures and within agreed timescales
- Carry out tests on four communication electronic systems, sub-systems or assemblies to LRU level, at least two of which must be selected from group A.NOTE: Any of the items below can be identified as a system, sub-system or assembly in its own right group A - communication electronics:5.1 transmitters5.2 transceivers5.3 receivers5.4 aerial systems5.5 radar systems5.6 staff communication systems (such as GSMR, PA, cab to cab)5.7 train control systems (such as AWS, ATP, TPWS, ERTMS)5.8 data transmission lines (such as fibre optics, coaxial, baluns, twin wire)5.9 display systems (such as crew and passenger information)5.10 driver-machine interface5.11 optical systems (such as CCTV)5.12 built-in test equipment5.13 data net
- work systems (such as LANs, WANs)5.14 data net
- work interfaces (such as switches, router, bridging networks)5.15 any other identifiable electronic system, sub-system or assemblies to Line Replaceable Unit (LRU) levelgroup B - associated equipment:5.16 environmental control systems (such as temperature, alarms, fire protection, fire suppression)5.17 electromechanical systems (such as servos, motors, relays, complex switches)5.18 power generation systems (such as AC/DC generators, batteries)5.19 power distribution systems (such as single phase/3-phase distribution panels, shore connections)5.20 traction supply control systems (such as inverters, rectifiers, regenerative braking)5.21 monitoring systems (such as On Train Data Recorder (OTDR))5.22 hybrid systems (such as ADC, DAC)
- Carry out tests using a range of tools and test equipment, to include four of the following:6.1 oscilloscope 6.2 temperature testing devices6.3 power meters6.4 logic analyser 6.5 Q meter 6.6 spectrum analyser6.7 current tracer 6.8 time domain reflectometer6.9 signal generator 6.10 frequency counter6.11 multimeter 6.12 protocol analyser6.13 computer-aided diagnostic equipment 6.14 breakout box6.15 special-purpose testing equipment 6.16 automatic test equipment6.17 other specific test equipment: ref: ( )
- Carry out all of the following tests or measurements, as applicable to the equipment being tested: 7.1 correct function7.2 resistance7.3 DC voltage/current levels 7.4 heat dissipation7.5 AC voltage/current levels 7.6 frequency modulation/demodulation7.7 clock/timer switching 7.8 perform
Test traction and rolling stock communication-electronic systems assessment help
Unit assessment details
Loading assessment details…