Mechanical Principles and applications — EAL Vocational Motor Vehicle & Transport
Learning outcomes
- Be able to determine the effects of loading in static engineering systems; 1.1 Calculate the magnitude, direction and position of the line of action of the resultant and equilibrant of a non-concurrent coplanar force system containing a minimum of four forces acting in different directions; 1.2 Calculate the support reactions of a simply supported beam carrying at least two concentrated loads and a uniformly distributed load; 1.3 Calculate the induced direct stress, strain and dimensional change in a component subjected to direct uniaxial loading and the shear stress and strain in a component subjected to shear loading.
- Be able to determine work, power and energy transfer in dynamic engineering systems; 2.1 Solve problems that require the application of kinetic and dynamic principles to determine unknown system parameters; 2.2 Determine the retarding force on a freely falling body when it impacts upon a stationary object and is brought to rest without rebound, in a given distance.
- Be able to determine the parameters of fluid systems; 3.1 Calculate the resultant thrust and overturning moment on a vertical rectangular retaining surface with one edge in the free surface of a liquid; 3.2 Determine the up-thrust on an immersed body; 3.3 Determine the thermal efficiency of a heat transfer process from given values of flow rate, temperature change and input power; 3.4 Use the continuity of volume and mass flow for an incompressible fluid to determine the design characteristics of a gradually tapering pipe.
Show all 4 objectives
- Be able to determine the effects of energy transfer in thermodynamic systems; 4.1 Calculate the dimensional change when a solid material undergoes a change in temperature and the heat transfer that accompanies a change of temperature and phase; 4.2 Solve problems that require application of thermodynamic process equations for a perfect gas to determine the unknown parameters of the problems; 4.3 Determine the force induced in a rigidly held component that undergoes a change in temperature.
Mechanical Principles and applications assessment help
Unit assessment details
Loading assessment details…