Skip to course topics

    EAL Vocational Motor Vehicle & Transport

    Explore your units, one topic at a time.

    Course overview

    The EAL Vocational Motor Vehicle & Transport specification covers 20 topics with 91 learning objectives (603/0375/X). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.

    • 20 topics
    • 91 learning objectives
    Ofqual Regulated: 603/0375/X
    Course version · 603/0375/XVersion from Sept 2020Change version

    Official Regulatory Specification

    Regulated by the Office of Qualifications and Examinations Regulation (Ofqual) in England

    View on Ofqual Register (opens the official government register in a new tab)
    Qualification Number (QN)
    603/0375/X
    Awarding Organisation
    EAL
    Regulatory Type
    Vocationally-Related Qualification
    National Level & Units
    Vocational • 20 units
    Sector Subject Area: Transportation operations and maintenance
    This qualification is officially accredited under the national framework. Credits and certified outcomes are recognised by employers, further education colleges, and training providers throughout the UK.
    20
    topics

    Qualification Units

    20 units

    How this qualification is graded

    Assessment follows the awarding organisation’s published requirements. Check the exact unit methods and grading rules with your provider.

    Overground rail vehicle traction and associated systems

    Understand traction and rolling stock suspension systems; 1.1 Describe the design, construction, maintenance and operation of train suspension; 1.2 Describe the purpose of the different suspension systems fitted to trains; 1.3 Explain how failed suspension increases damage to both track and vehicles; 1.4 Compare conventional body/bogie mountings.. Understand the fundamentals of traction and rolling stock braking systems; 2.1 Describe the operation of a typical air/electric brake system; 2.2 Describe how a variable load valve works and what symptoms would become apparent in the event of failure; 2.3 Describe the various types of friction pad in use on traction and rolling stock; 2.4 Describe the operation of a wheel slide prevention system; 2.5 Describe the safety systems that can take over the operation of a train braking system in the event of operator error; 2.6 Describe why automatic sanding is necessary; 2.7 Explain the implications to the Train Operating Company (TOC) of a unit in service being unable to release brakes whilst on the line; 2.8 Explain the use of round train circuits and the implications of their failure.. Understand the fundamentals of traction and rolling stock axles, wheels and bearings; 3.1 Describe a typical wheelset, identifying all components; 3.2 Identify the different types of wheel profile and their specific use; 3.3 Describe the process of changing out a wheelsets as routine maintenance, identifying all risks associated with the operation; 3.4 Explain the risks associated with changing out a wheelsets; 3.5 Describe in situ test and inspection methods for Traction and rolling stock wheelsets; 3.6 Discuss the implications of a ‘flat’ on a wheelset; 3.7 Discuss ways in which wheelset life may be extended; 3.8 Explain the importance of a regular maintenance programme for traction and the implications of a delay in this.

    7 learning outcomes

    Underground rail passenger comfort, safety and security

    Understand Closed Circuit Television systems; 1.1 Explain the purposes of a Closed Circuit Television system in terms of passenger security and comfort; 1.2 Explain the components used, technical requirements and their function in a typical Closed Circuit Television system; 1.3 Describe the implications of a Closed Circuit Television system failing the methods used for fault finding on the system; 1.4 Explain the reasons for the different types of recording media used in typical Closed Circuit Television systems; 1.5 Explain the implications of using a Closed Circuit Television system with respect the privacy of passengers.. Understand Heating Ventilation and Air Conditioning Systems; 2.1 Explain the principles of heat transfer in terms of conduction, convection and radiation; 2.2 Explain the relationship between temperature and pressure and how this relationship is used in HVAC systems; 2.3 Explain the stages and operation of a typical rolling stock HVAC system; 2.4 Describe the components and their function in a typical rolling stock HVAC system; 2.5 Describe the air conditioning refrigeration systems; 2.6 Describe the safety precautions to be used when working on and around HVAC systems; 2.7 Describe a typical control unit for an HVAC used within rolling stock and any associated maintenance; 2.8 Explain the environmental and legal implications of a release of refrigerant into the atmosphere.. Understand Passenger Information Systems; 3.1 Describe a typical Passenger Information System showing all of the key components including controllers, displays, passenger alarms and on train audio; 3.2 Demonstrate an understanding of the relationship between passenger alarms and emergency brakes; 3.3 Describe the function and operation of each of the Passenger Information System components; 3.4 Explain how automatic announcements are controlled on a typical Passenger Information System; 3.5 Demonstrate the ability to fault find on the Passenger Information Systems using downloads, system schematics and MVB analysis if applicable; 3.6 Explain the importance of having a functioning Passenger Information System in terms of passenger safety and comfort.

    5 learning outcomes

    Mechanical Principles and applications

    Be able to determine the effects of loading in static engineering systems; 1.1 Calculate the magnitude, direction and position of the line of action of the resultant and equilibrant of a non-concurrent coplanar force system containing a minimum of four forces acting in different directions; 1.2 Calculate the support reactions of a simply supported beam carrying at least two concentrated loads and a uniformly distributed load; 1.3 Calculate the induced direct stress, strain and dimensional change in a component subjected to direct uniaxial loading and the shear stress and strain in a component subjected to shear loading.. Be able to determine work, power and energy transfer in dynamic engineering systems; 2.1 Solve problems that require the application of kinetic and dynamic principles to determine unknown system parameters; 2.2 Determine the retarding force on a freely falling body when it impacts upon a stationary object and is brought to rest without rebound, in a given distance.. Be able to determine the parameters of fluid systems; 3.1 Calculate the resultant thrust and overturning moment on a vertical rectangular retaining surface with one edge in the free surface of a liquid; 3.2 Determine the up-thrust on an immersed body; 3.3 Determine the thermal efficiency of a heat transfer process from given values of flow rate, temperature change and input power; 3.4 Use the continuity of volume and mass flow for an incompressible fluid to determine the design characteristics of a gradually tapering pipe.

    4 learning outcomes

    Overground rail passenger comfort, safety and security

    Understand passenger safety and security systems; 1.1 Explain the importance of Closed Circuit Television systems and passenger information systems in terms of passenger security and comfort; 1.2 Explain the components used, technical requirements and their function in a typical Closed Circuit Television system; 1.3 Explain the different recording media used in typical Closed Circuit Television systems; 1.4 Explain the implications of using and maintaining a Closed Circuit Television system with respect the privacy of passengers; 1.5 Describe a typical Passenger Information System showing all of the key components including controllers, displays, passenger alarms and on train audio; 1.6 Describe of the relationship between passenger alarms and emergency brakes; 1.7 Describe the function and operation of Passenger Information System components and how fault finding is carried out on them; 1.8 Explain how automatic announcements are controlled on a typical Passenger Information System.. Understand Heating Ventilation and Air Conditioning Systems; 2.1 Explain the principles of heat transfer in terms of conduction, convection and radiation; 2.2 Explain the relationship between temperature and pressure and how this relationship is used in HVAC systems; 2.3 Describe the components and their function in a typical rolling stock HVAC system; 2.4 Compare and contrast the different types of refrigeration including mechanical, chemical and venturi; 2.5 Describe the safety precautions to be used when working on and around HVAC systems; 2.6 Describe a typical electronic control unit for an HVAC used within rolling stock and any associated maintenance software; 2.7 Explain the environmental and legal implications of a release of refrigerant into the atmosphere.. Understand train interior and exterior, saloon and cab door systems; 3.1 Explain the operating principles of electrical and pneumatic, exterior and interior, cab and saloon doors systems; 3.2 Explain the components, materials used and operational requirements of exterior cab and saloon doors systems; 3.3 Describe the electrical/ electronic methods used for the control and operation of exterior cab and saloon door systems; 3.4 List the safety devices fitted to exterior saloon doors and describe the operation of these devices; 3.5 Explain the term ‘wrong side failure’ and any implications that such a failure would have on the exterior saloon door system; 3.6 Demonstrate the ability to fault find on the cab and saloon interior and exterior door systems using downloads, diagnostic software, system schematics and MVB analysis if applicable; 3.7 Explain the importance a correct mechanical saloon door set up with regard to normal operation, safety implications and impact on the serviceability of door components; 3.8 Describe the differences between cab back wall doors and standard interior doors explaining the reasons for these differences and the different implications of any failures.

    5 learning outcomes

    Underground rail vehicle traction and associated systems

    Understand traction and rolling stock suspension systems; 1.1 Describe the design, construction, maintenance and operation of train suspension 1.2 Describe the purpose of the different suspension systems fitted to trains; 1.3 Explain how failed suspension increases damage to both track and vehicles; 1.4 Compare conventional body/bogie mountings.. Understand the fundamentals of traction and rolling stock braking systems; 2.1 Describe the operation of a typical air/electric brake system; 2.2 Describe how a variable load valve works and what symptoms would become apparent in the event of failure; 2.3 Describe the various types of friction pad in use on traction and rolling stock; 2.4 Describe the operation of a wheel slide prevention system; 2.5 Describe the safety systems that can take over the operation of a train braking system in the event of operator error; 2.6 Describe why automatic sanding is necessary; 2.7 Explain the implications to the Train Operating Company (TOC) of a unit in service being unable to release brakes whilst on the line; 2.8 Explain the use of round train circuits and the implications of their failure.. Understand the fundamentals of traction and rolling stock axles, wheels and bearings; 3.1 Describe a typical wheelset, identifying all components; 3.2 Identify different types of wheel profile and their specific use; 3.3 Describe the risks associated with changing out wheelsets; 3.4 Describe in situ test and inspection methods for Traction and rolling stock wheelsets; 3.5 Discuss the implications of a ‘flat’ on a wheelset; 3.6 Discuss ways in which wheelset life may be extended; 3.7 Explain the importance of a regular maintenance programme for traction and the implications of a delay in this.

    5 learning outcomes

    Working safely within Rail Engineering

    Understand commercial operations and corporate policies; 1.1 Explain the importance of third party requirements and client confidentiality;1.2 Describe the employing organisations policies on ethics, diversity and equality; 1.3 Describe the implications of not following policies on ethics, diversity and equality; 1.4 Describe commercial operations and contractual principles between railway organisations; 1.5 Identify positive and negative implications for railway organisations within their commercial operations.. Understand health and safety legislation and regulations; 2.1 Describe the responsibilities of the employee and employer with regards to workplace health and safety; 2.2 Describe the roles and responsibilities of different organisations involved with workplace health and safety; 2.3 Describe the key features of the relevant legislation and directives with regard to health and safety; 2.4 describe the key features of the relevant legislation and directives with regard to environmental management; 2.5 Explain the possible consequences and cost implications of employees not abiding by legislation and regulations; 2.6 Explain the possible consequences and cost implications of employers not abiding by legislation and regulations.. Know about hazards and risks in the workplace; 3.1 Explain the difference between a risk and a hazard; 3.2 Describe the methods used to identify hazards in a working environment; 3.3 Explain how hazards which become risks can be controlled; 3.4 Describe the process of carrying out a risk assessment within the working environment; 3.5 Identify control measures as part of a risk assessment.

    4 learning outcomes
    About this course

    About EAL Vocational Motor Vehicle & Transport

    The EAL Occupational Qualification in Motor Vehicle & Transport is a vocational, competence-based course designed for students who want a hands-on route into the automotive industry. It covers the core technical skills and knowledge needed to work safely and effectively on light vehicles, including engine systems, electrical and electronic principles, chassis and transmission, and vehicle inspection and repair. The qualification is structured around practical tasks and theory units, so you learn by doing while building the underpinning knowledge employers expect.

    The specification is organised into mandatory units that develop your understanding of health, safety and good housekeeping in the automotive environment, alongside specialist units such as engine repair, electrical fault diagnosis, and vehicle maintenance. You will also develop transferable skills like communication, teamwork, and problem-solving, which are assessed through realistic workshop scenarios. The EAL qualification is recognised by employers and training providers, making it a strong foundation for an apprenticeship or further study.

    Assessment Structure

    This EAL Occupational Qualification is assessed through a combination of practical assessments and written knowledge tests. There are no traditional written exam papers; instead, you complete a portfolio of evidence for each unit, which includes observed practical tasks, written assignments, and multiple-choice or short-answer tests set by EAL. The qualification is graded pass/fail, and you must achieve all mandatory units plus a selection of optional units to gain the full award. Total marks vary by unit, but each unit is credit-rated, and you typically need to complete 30 to 60 credits depending on the pathway.

    Why Choose EAL?

    • EAL is the UK's leading awarding organisation for engineering and manufacturing, so its Motor Vehicle & Transport qualification is highly respected by employers and apprenticeship providers. It is specifically designed with industry input, meaning you learn the exact skills that garages and dealerships need.
    • The assessment is entirely practical and portfolio-based, which suits students who prefer to demonstrate their skills through hands-on work rather than sitting traditional written exams. This makes it an ideal choice if you are looking for a more vocational, applied route into the motor trade.
    • EAL qualifications are widely available in colleges and training centres across the UK, and they often provide a direct progression route to an advanced apprenticeship or a Level 3 Diploma in Vehicle Maintenance and Repair. The board also offers excellent support materials and clear assessment criteria, so you always know what you need to do to pass.

    Frequently Asked Questions

    What is the EAL Occupational Qualification in Motor Vehicle & Transport equivalent to?
    The EAL Occupational Qualification is a vocational qualification that sits at Level 1 or Level 2 on the Regulated Qualifications Framework (RQF), depending on the specific pathway and units you take. It is broadly equivalent to a GCSE in terms of level, but it is assessed entirely through practical work and coursework rather than exams. Many students take it as a stepping stone to a Level 3 apprenticeship or a more advanced technical diploma.
    Do I need any prior experience to start this EAL course?
    No prior experience is required for the Level 1 qualification, although an interest in cars and mechanics is helpful. For the Level 2 qualification, some centres may ask for a Level 1 qualification or equivalent, such as GCSEs in maths and English. Always check with your college or training provider, as entry requirements can vary.
    How is the EAL Motor Vehicle & Transport course assessed?
    Assessment is through a combination of practical observations, written assignments, and short knowledge tests set by EAL. You will build a portfolio of evidence for each unit, which is internally assessed and externally verified. There are no traditional written exams, so you can demonstrate your skills in a real workshop environment.
    What can I do after completing the EAL Occupational Qualification?
    After completing the qualification, you can progress to a Level 3 Diploma in Vehicle Maintenance and Repair, or apply for an advanced apprenticeship in motor vehicle service and repair. You could also seek employment as a trainee mechanic, tyre fitter, or vehicle technician. Many students use this qualification as a direct route into the motor trade.
    Is the EAL qualification recognised by employers and apprenticeship providers?
    Yes, EAL is a well-known and respected awarding organisation in the engineering and automotive sectors. Its qualifications are developed with industry input and are widely recognised by employers, garages, and apprenticeship providers across the UK. Holding an EAL qualification demonstrates that you have the practical skills and knowledge needed to work in a real workshop.

    Ready for a little practice?

    Create your account to start practising Motor Vehicle & Transport.

    Start free

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge