Skip to topic
    ← Back to course topics

    Provide technical advice and guidance on rail engineering or manufacturing requirements — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with health and safety legislation, regulations,directives and other relevant guidelines
    2. Demonstrate the required behaviours in line with the job role and companyobjectives
    3. Understand the recipients requirements for technical advice or guidance
    Show all 13 objectives
    1. Provide technical advice and guidance for two of the following groups of people:1.1 colleagues in the same work group1.2 colleagues outside work group1.3 contractors1.4 client/customers1.5 others working on related technical activity areas
    2. Provide technical guidance for one of the following activities:2.1 drawing/design activities (such as mechanical, electrical/electronic,automotive, aerospace, marine)2.2 manufacturing activities (such as machining, detail fitting, fabrication ofcomponents, pressing)2.3 material processing activities (such as heat treatment, casting, injectionmoulding, purification)2.4 composite manufacture (such as wet lay-up, pre-preg laminating, resininfusion, blow moulding)2.5 finishing activities (such as stripping finishes, painting, plating, anodising,veneering, lacquering)2.6 assembly activities (such as mechanical, structural, fluid power,electrical/electronic, woodworking)2.7 installation activities (such as mechanical, electrical/electronic, avionic,structural, environmental equipment)2.8 plant and equipment (such as site preparation, plant layout, equipmentchangeover, equipment replacement)2.9 equipment capability studies/performance measurement2.10 movement of materials, components or finished goods2.11 business improvement activities2.12 engineering safety audits or risk assessments2.13 quality control/quality assurance2.14 maintenance activities2.15 modification and repair activities2.16 commissioning/decommissioning Page 3 of 5REATC4-015 Issue 1.02.17 research and development2.18 testing and/or trialling2.19 engineering support services2.20 environmental/sustainability activities
    3. Provide technical advice and guidance on four of the following:3.1 equipment operation3.2 specific or specialist tools, equipment or components required3.3 equipment/component/process performance parameters3.4 materials required/used3.5 physical characteristics of components or products3.6 timing/delivery details3.7 environmental considerations/operating conditions3.8 cost/budget information3.9 manufacturing methods3.10 aesthetics/finish details3.11 manufacturing detail3.12 quality requirements/control3.13 processing requirements3.14 monitoring/servicing frequency3.15 work instructions or procedures3.16 training required3.17 number/volume required3.18 customer interface requirements3.19 resource requirements3.20 safety regulations and requirements3.21 equipment/component interfacing
    4. Provide advice and guidance resulting from two of the following:4.1 reported problems found during the engineering or manufacturingactivity4.2 recorded deviations from agreed plans and schedules4.3 customer requests or complaints4.4 training, development or mentoring
    5. Provide technical advice and guidance by the following methods:5.1 specific company documentationPlus by one other method from the following:5.2 verbally5.3 computer generated report5.4 electronic mail5.5 computer based presentation5.6 other appropriate media
    6. Confirm that they have interpreted the requirements correctly and accuratelyPage 4 of 5REATC4-015 Issue 1.0P5 Establish the timelines required to provide the technical advice and guidance
    7. Ensure that any data and information drawn upon for which advice and guidance issought is up to date, valid, reliable and sufficient to meet the recipientsrequirements
    8. Ensure technical advice and guidance provided is in line with company policies,procedures and constraints
    9. Ensure that technical advice and guidance provided complies with any relevantlegislation, standards, directives or codes of practice
    10. Ensure that the technical advice and guidance complies with three of the following:6.1 organisational guidelines and procedures6.2 equ

    Provide technical advice and guidance on rail engineering or manufacturing requirements assessment help

    Unit assessment details

    Loading assessment details…