Using and interpreting engineering data and documentation — EAL Vocational Motor Vehicle & Transport
Learning outcomes
- Demonstrate the required behaviours in line with the job role and company objectives
- Use oral, written, electronic and IT based methods and systems for the accuratecommunication, reporting & recording of technical and other information and use out allof the following:2.1 oral based methods and systems2.2 written based methods and systems2.3 electronic based methods and systems2.4 IT based methods and systems
- Use the approved source to obtain the required data, documentation or specifications and
Show all 11 objectives
- carry out all of the following:2.1 check the currency and validity of the documentation used2.2 exercise care and control over the documentation at all times2.3 correctly extract all necessary data in order to carry out the required tasks2.4 seek out additional information where there are gaps or deficiencies in theinformation obtained2.5 report any problems found with the data, documentation or specifications2.6 make valid decisions based on the information extracted2.7 return all documentation to the approved location on completion of the work
- Extract and interpret information from engineering drawings and other relateddocumentation
- Extract information that includes three of the following:5.1 materials or components required5.2 connections to be made5.3 dimensions5.4 processes or treatments required5.5 dismantling/assembly sequence required5.6 installation requirements5.7 location/orientation of parts5.8 tolerances and quality requirements5.9 circuit characteristics (such as pressure, flow, current, voltage, speed)5.10 test points5.11 inspection requirements
- Use terms and information extracted from engineering drawings and relateddocumentation to establish work requirements, to include four of the following:6.1 general assembly drawings6.2 routing diagrams (such as piping, cables etc)6.3 fluid power drawings6.4 layout diagrams (such as schematic, block, physical, system)6.5 wiring/circuit diagrams6.6 approved sketches6.7 installation drawings6.8 technical illustrations6.9 manufacturers' manuals/drawings6.10 visual display screens6.11 photographic images
- Use information extracted from related standards, templates and certifications to establish
- work requirements to include four from the following:7.1 standard operating procedures7.2 maintenance log/reports7.3 reference tables/charts (such as logic tables, ladder diagrams)7.4 fault diagnosis guides7.5 national, international and organisational standards7.6 test schedules7.7 health and safety standards relating to activity (such as COSHH)7.8 test results7.9 environmental requirements/information7.10 manufacturers' instructions
- If applicable report any inaccuracies or discrepancies in documentation and specifications
- Deal promptly and effectively with any problems within their control and report thosewhich cannot be solved
Using and interpreting engineering data and documentation assessment help
Unit assessment details
Loading assessment details…