Data handling — AQA GCSE Psychology
Data handling explained
Data handling covers 7 specification points, including Quantitative and qualitative data The… and Primary and secondary data The difference….
Read the full explanation
Open a point below for its explanation and revision guidance.
Quantitative and qualitative data The difference between quantitative and qualitative data.
This criterion asks you to know the difference between quantitative and qualitative data. Quantitative data is numerical: it records amounts or scores, such as the number of words recalled, a rating from 1 to 10, or a reaction time in seconds. It can be counted, averaged and put into graphs. Qualitative data is non-numerical: it records descriptions, words or meanings, such as a participant's spoken account of a dream or a written comment about how a task felt. It is analysed by identifying themes rather than by calculating averages. The key distinction is the form of the data, not the method used to collect it, although some methods tend to produce one type more than the other. In an MCQ, decide whether the data given is a number or a description, then choose the matching term.
Primary and secondary data The difference between primary and secondary data.
Primary data is collected first-hand by the researcher for the specific research question in hand, for example running your own memory experiment and recording each participant's score. Secondary data is data that already exists because someone else gathered it for their own purpose, for example published exam results, hospital records or a previous study's findings that you re-analyse. The key distinction is who collected the data and why, not whether the numbers are big or small. A researcher can use both: collect new questionnaire responses (primary) and compare them with national statistics (secondary). Each has strengths and limitations: primary data is controlled and targeted but time-consuming; secondary data is quick and often large-scale but may not fit your question and its quality is outside your control.
Computation Recognise and use expressions in decimal and standard form: use ratios, fractions and percentages, estimate results, find arithmetic means and use an appropriate number of significant figures.
This criterion covers numerical skills applied to psychological data. Recognise and use decimals and standard form: 0.0045 is 4.5 × 10⁻³, and 25 000 is 2.5 × 10⁴. Use ratios (a 3:1 split of 40 participants gives 30 and 10), fractions (¾ of 60 = 45) and percentages (18 out of 24 = 75%). Estimate results before calculating, for example 19.8 × 4.9 is about 20 × 5 = 100, to check an answer is sensible. Find the arithmetic mean by adding all scores and dividing by the number of scores: for 4, 6, 8, 10 the total is 28 and the mean is 28 ÷ 4 = 7. Report to an appropriate number of significant figures, matching the precision of the data; 7.0 has two significant figures and 0.00450 has three.
Descriptive statistics Understand and calculate mean, median, mode and range.
Descriptive statistics summarise a set of scores with a single value so a researcher can describe the data quickly. To find the mean, add all scores and divide by how many there are; for 4, 6, 6, 8 the total is 24 and 24 ÷ 4 = 6. To find the median, put scores in order and take the middle value; with an even number, average the two middle scores. The mode is the most frequent score, and a set can have no mode or more than one. The range is the highest score minus the lowest, showing spread rather than a typical value. Always order the data before finding the median, and check whether the question asks for a measure of central tendency or of spread.
Interpretation and display of quantitative data
Quantitative data are numerical and can be displayed in tables, bar charts, histograms, scatter diagrams and line graphs. Displaying data makes patterns visible, and interpreting a display means reading values, comparing groups and describing trends accurately. Choose a display that suits the data: bar charts for categories, scatter diagrams to show a relationship between two variables, and line graphs for change over time. When interpreting, state what the display shows, quote actual values from the axes, and avoid claiming cause from a correlation. Check axis labels, units and scales before drawing conclusions, because a misleading scale can distort the apparent pattern.
Construct and interpret frequency tables and diagrams, bar charts, histograms and scatter diagrams for correlation.
Data handling in psychology means turning raw scores into displays you can read. A frequency table counts how many participants fall into each category or score band; a frequency diagram or bar chart shows those counts as bars, with gaps between bars for separate categories. A histogram is used for continuous data, so its bars touch and each bar covers a class interval. A scatter diagram plots one variable on the x-axis and another on the y-axis, one point per participant, so you can judge correlation: points rising together suggest positive correlation, falling apart suggest negative, and a shapeless cloud suggests none. Constructing means labelling axes, choosing sensible intervals and plotting accurately; interpreting means describing the pattern, the spread and any outliers, not just naming the chart.
Normal distributions The characteristics of normal distribution.
A normal distribution is a symmetrical, bell-shaped curve describing how many continuous variables, such as height or reaction time, cluster around a central value. Its key characteristics: it is symmetrical about the mean, so the mean, median and mode coincide at the centre; most scores lie near the middle and fewer toward the tails; the curve is asymptotic, approaching but never touching the horizontal axis; and a fixed proportion of scores falls within set distances from the mean, with roughly 68% within one standard deviation and about 95% within two. In psychology this matters because many statistical tests assume roughly normal data, and because it lets you judge whether an individual score is typical or extreme relative to the sample.
Your focus
- Define quantitative and qualitative data.
- Classify given examples as quantitative or qualitative.
- Explain the difference between numerical and non-numerical data.
Show all 21 objectives
- Distinguish primary from secondary data by identifying who collected it and why.
- Give a concrete example of primary data and of secondary data.
- Explain one strength and one limitation of each data type in a research context.
- Convert numbers between decimal and standard form, including negative indices.
- Use ratios, fractions and percentages and estimate results to check calculations.
- Calculate an arithmetic mean and report it to an appropriate number of significant figures.
- Calculate the mean, median, mode and range from a set of scores.
- Order data correctly and handle an even number of scores when finding the median.
- Explain the difference between a measure of central tendency and the range as a measure of spread.
- Select a suitable display for a given set of quantitative data.
- Interpret values, trends and comparisons accurately from a display.
- Explain why a correlation does not establish cause and how scale choices affect interpretation.
- Construct a frequency table, bar chart, histogram or scatter diagram from a set of psychological data with correctly labelled axes.
- Distinguish when a bar chart, a histogram or a scatter diagram is the appropriate display for the data.
- Interpret a completed display by describing the pattern, spread and any outliers it shows.
- State the defining characteristics of a normal distribution, including symmetry and the coincidence of mean, median and mode.
- Describe how scores are distributed around the mean in terms of standard deviations.
- Explain why recognising a normal distribution is useful when interpreting psychological data.
Data handling exam tips
Marking Points
- Defines quantitative data as numerical data that can be counted or measured.
- Defines qualitative data as non-numerical data such as words, descriptions or meanings.
- Gives a correct example of quantitative data, such as a score, a count or a time in seconds.
- Gives a correct example of qualitative data, such as a written comment or a spoken description.
- Distinguishes the two by the form of the data rather than by the research method alone.
- Primary data is gathered first-hand by the researcher for the current research aim, such as recording participants' scores in the researcher's own experiment.
- Secondary data already exists and was collected by someone else for a different purpose, such as published statistics or a previous study's results.
- The defining difference is who collected the data and for what purpose, not the size, format or age of the data.
- A single investigation can combine both, for example new questionnaire responses compared with existing national statistics.
- Primary data allows control over method and measurement but costs time and resources; secondary data is quick and often large-scale but may not match the research question and its quality cannot be controlled.
- Convert between decimal and standard form correctly, for example 0.0045 = 4.5 × 10⁻³ and 25 000 = 2.5 × 10⁴.
- Use ratios and fractions to share or scale quantities, for example splitting 40 participants in the ratio 3:1 gives 30 and 10, and ¾ of 60 = 45.
- Express a score as a percentage by dividing the part by the whole and multiplying by 100, for example 18 out of 24 = 75%.
- Estimate a result by rounding to convenient values before calculating, for example 19.8 × 4.9 ≈ 20 × 5 = 100, to judge whether an answer is reasonable.
- Calculate the arithmetic mean by summing all scores and dividing by the number of scores, for example (4 + 6 + 8 + 10) ÷ 4 = 7.
- Round a result to an appropriate number of significant figures consistent with the precision of the data, for example reporting 7.0 rather than 7.043.
- Mean: sum all scores then divide by the number of scores, e.g. 4, 6, 6, 8 gives 24 ÷ 4 = 6.
- Median: arrange scores in ascending order and select the middle value; for an even count, average the two central scores.
- Mode: identify the score occurring most often, and recognise that a data set may have no mode or several modes.
- Range: subtract the lowest score from the highest to give a measure of spread, not a typical value.
- Distinguish measures of central tendency (mean, median, mode) from the range, which describes dispersion.
- Select a display suited to the data, such as a bar chart for categories or a scatter diagram for a relationship between two variables.
- Read values accurately from axes, labels and scales, quoting actual figures when describing a pattern.
- Describe trends and comparisons between groups or conditions shown in the display.
- Recognise that a correlation shown on a scatter diagram does not by itself demonstrate cause.
- Identify how an inappropriate or misleading scale or missing label could distort interpretation.
- A frequency table records how many participants or scores fall into each category or interval, giving a tally or count per row.
- A bar chart displays categorical frequencies with separate bars and gaps; bar height equals the frequency.
- A histogram represents continuous data grouped into class intervals, so adjacent bars touch and the width of each interval matters.
- A scatter diagram plots paired scores for each participant, one variable per axis, to show the direction and strength of a correlation.
- Interpretation requires describing the pattern (for example positive, negative or no correlation), the spread of points and any outliers, not merely identifying the chart type.
- Axes must be labelled with the variable and units, and a suitable scale chosen so the pattern is visible.
- A normal distribution is symmetrical about its central value, producing a bell-shaped curve.
- In a normal distribution the mean, median and mode are equal and located at the centre.
- Most scores cluster near the mean, with frequencies decreasing toward the tails.
- The curve is asymptotic: it approaches but never meets the horizontal axis.
- A known proportion of scores lies within given standard deviations of the mean, approximately 68% within one and about 95% within two.
- Many psychological variables and statistical tests assume an approximately normal distribution, so recognising it helps judge whether a score is typical or extreme.
Examiner Tips
- 💡Ask yourself whether the data is a number or a description before choosing an option.
- 💡Look for the word 'numerical' to signal quantitative and 'descriptive' or 'words' to signal qualitative.
- 💡Check examples carefully, because a rating scale gives quantitative data even when it measures a feeling.
- 💡Anchor each definition on who collected the data and for what purpose, then give one concrete example of each.
- 💡When a scenario is given, name the data type and justify it by pointing to the collector and purpose.
- 💡If asked to compare, state one strength and one limitation of each type rather than listing only advantages.
- 💡Estimate first, then calculate, and use the estimate to check the final answer is sensible.
- 💡Show the sum and the count when finding a mean so the method is visible.
- 💡State the number of significant figures you are rounding to and apply it consistently.
- 💡Write the scores in order before calculating the median so the middle is unambiguous.
- 💡Show the total and the division for the mean so arithmetic can be checked.
- 💡Re-read the question to confirm whether it wants a measure of central tendency or of spread.
- 💡Read the axis labels and scale intervals before describing any pattern.
- 💡Support each interpretation with a specific value taken from the display.
- 💡Use the word correlation rather than cause when describing a relationship between two variables.
- 💡Before answering, check what the question asks: constructing (drawing or completing a display) or interpreting (describing what the display shows).
- 💡When interpreting, use the words positive, negative or no correlation and support each claim with a feature of the plotted points.
- 💡Check axis labels, units and scale first; a display with unlabelled axes cannot be interpreted reliably.
- 💡When asked for characteristics, give several distinct features (symmetry, central tendency, tails, proportions within standard deviations) rather than one.
- 💡Use the standard-deviation proportions to reason about whether a particular score is typical or extreme.
- 💡Link the characteristic to why it matters in psychology, such as the assumptions behind statistical tests.
Common Mistakes
- Thinking qualitative data means poor-quality data: correction, it means non-numerical data such as words and descriptions.
- Assuming a questionnaire always produces quantitative data: correction, open questions can produce qualitative answers, while closed questions produce quantitative data.
- Confusing the method with the data type: correction, the same method can yield either type depending on how responses are recorded.
- Thinking secondary data means data collected second in time; correction: it means data collected by someone other than the current researcher, whatever the date.
- Assuming numbers are always primary and words always secondary; correction: the distinction is about who collected the data and why, not the data format.
- Believing secondary data is automatically lower quality; correction: it may be high quality and large-scale, but its suitability and reliability must be judged case by case.
- Treating standard form as simply adding a power of ten without checking the direction; correction: a number below 1 has a negative index, so 0.0045 is 4.5 × 10⁻³, not 4.5 × 10³.
- Dividing by the number of scores plus one or forgetting to divide at all when finding the mean; correction: the arithmetic mean is the total divided by the actual count of scores.
- Reporting many decimal places as if more precision were better; correction: round to a number of significant figures appropriate to the data, not to the calculator display.
- Adding scores but forgetting to divide by the number of scores for the mean; correction: divide the total by the count of scores.
- Finding the median without ordering the scores first; correction: always sort the data ascending before locating the middle.
- Treating the range as an average or as a central value; correction: the range is highest minus lowest and measures spread.
- Claiming that a relationship shown in a scatter diagram proves one variable causes the other; correction: describe it as a correlation and note that cause is not established.
- Describing a pattern without quoting any values from the axes; correction: support the description with actual figures read from the display.
- Ignoring axis labels, units or scale intervals; correction: check them first so readings and comparisons are accurate.
- Drawing a histogram with gaps between bars: correction is that continuous class intervals produce touching bars, whereas separate categories use a bar chart with gaps.
- Reading a scatter diagram as proof of cause and effect: correction is that a correlation shows a relationship between two variables, not that one causes the other.
- Labelling axes without the variable name or units: correction is to state each variable and its units so the display can be interpreted.
- Describing a chart only by its type rather than its pattern: correction is to state direction, spread and outliers shown by the data.
- Describing a normal distribution as skewed or lopsided: correction is that it is symmetrical, with equal frequencies either side of the mean.
- Claiming the mean, median and mode differ in a normal distribution: correction is that all three coincide at the centre.
- Thinking the curve touches the horizontal axis at the tails: correction is that it is asymptotic and never meets the axis.
- Assuming every data set is normally distributed: correction is that normality is a property to be checked, and some data are skewed.