OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (c) use of an infrared spectrum of an organic compound to identify:

    Full specification wording

    Analytical techniques: (c) use of an infrared spectrum of an organic compound to identify:

    Infrared spectroscopy passes infrared radiation through a sample and records which wavenumbers are absorbed; the resulting spectrum is a plot of absorbance (or transmittance) against wavenumber in…

    • Point 3 of 13
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Infrared spectroscopy passes infrared radiation through a sample and records which wavenumbers are absorbed; the resulting spectrum is a plot of absorbance (or transmittance) against wavenumber in cm⁻¹, usually read from about 4000 cm⁻¹ down to 500 cm⁻¹. An organic compound absorbs at wavenumbers that match the vibrational energies of its bonds, so particular absorption peaks act as fingerprints for particular bond types. To identify a compound you read the position of each significant peak, decide which bond vibration it corresponds to, and then assemble the functional groups those bonds imply.

    For example: A broad absorption centred near 3300 cm⁻¹ points to an O–H bond, while a sharp strong peak near 1700 cm⁻¹ points to a C=O bond; finding both suggests a carboxylic acid rather than an alcohol or a ketone.

    What earns the marks

    • Reads the wavenumber value in cm⁻¹ at the centre of a labelled absorption peak.
    • Assigns a peak to a specific bond vibration such as O–H, C=O, C–H or C≡N.
    • Combines two or more assigned peaks to propose a functional group or class of compound.
    • Uses the fingerprint region below about 1500 cm⁻¹ to confirm a match with a reference spectrum.
    • Rejects a candidate structure whose expected bond absorptions are absent from the spectrum.

    Common mistakes and how to put them right

    • Reads the height of a peak as the identity of the bond.

      Put it right: Read the wavenumber position instead, because position identifies the bond type.

    • Assigns every peak in the fingerprint region to a named functional group.

      Put it right: Treat that region as a whole-spectrum fingerprint for matching.

    • Ignores peak shape and breadth when assigning an O–H absorption.

      Put it right: Note that a broad absorption is characteristic of hydrogen-bonded O–H.

    • Confuses the infrared region with the visible region.

      Put it right: State that infrared absorptions are quoted in wavenumbers in cm⁻¹.

    Exam tips

    • Quote the wavenumber at the centre of the peak, not its height or area, when justifying an assignment.
    • Learn a short table of characteristic ranges for O–H, C–H, C=O, C≡N and C=C and practise matching them to displayed spectra.
    • When a question gives a structure and a spectrum, check each expected absorption in turn and state which are present and which are absent.

    Try the lesson

    The start of the Analytical techniques: (c) use of an infrared spectrum of an organic compound to identify: lesson, made from teaching notes for this specification point.

    Listen

    Infrared spectroscopy passes infrared radiation through a sample and records which wavenumbers are absorbed; the resulting spectrum is a plot of absorbance (or transmittance) against wavenumber in cm⁻¹, usually read from about 4000 cm⁻¹ down to 500 cm⁻¹. An organic compound absorbs at wavenumbers that match the vibrational energies of its bonds, so particular absorption peaks act as fingerprints for particular bond types. To identify a compound you read the position of each significant peak, decide which bond vibration it corresponds to, and then assemble the functional groups those bonds imply. For example, a broad absorption centred near 3300 cm⁻¹ points to an O–H bond, while a sharp strong peak near 1700 cm⁻¹ points to a C=O bond; finding both suggests a carboxylic acid rather than an alcohol or a ketone. A strong answer earns marks for these points. Reads the wavenumber value in cm⁻¹ at the centre of a labelled absorption peak. Assigns a peak to a specific bond vibration such as O–H, C=O, C–H or C≡N. Combines two or more assigned peaks to propose a functional group or class of compound. Uses the fingerprint region below about 1500 cm⁻¹ to confirm a match with a reference spectrum. Exam tip: Quote the wavenumber at the centre of the peak, not its height or area, when justifying an assignment.

    Key words

    Say what each word means before you turn the card.

    Absorption of infrared radiation by bond vibrations

    Try answering aloud or in your head before turning the card.

    Wavenumber in cm⁻¹ as the horizontal axis

    Try answering aloud or in your head before turning the card.

    Characteristic absorptions of common organic bonds

    Try answering aloud or in your head before turning the card.

    Fingerprint region and matching to reference spectra

    Try answering aloud or in your head before turning the card.

    See every definition
    Absorption of infrared radiation by bond vibrations
    An organic compound absorbs at wavenumbers that match the vibrational energies of its bonds, so particular absorption peaks act as fingerprints for particular bond types.
    Wavenumber in cm⁻¹ as the horizontal axis
    The spectrum is a plot of absorbance (or transmittance) against wavenumber in cm⁻¹, usually read from about 4000 cm⁻¹ down to 500 cm⁻¹.
    Characteristic absorptions of common organic bonds
    A broad absorption centred near 3300 cm⁻¹ points to an O–H bond, while a sharp strong peak near 1700 cm⁻¹ points to a C=O bond.
    Fingerprint region and matching to reference spectra
    The fingerprint region below about 1500 cm⁻¹ is used to confirm a match with a reference spectrum.

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Analytical techniques: (c) use of an infrared spectrum of an organic compound to identify:

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge