OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (h) the techniques and procedures used to determine enthalpy changes…

    Full specification wording

    Enthalpy changes: (h) the techniques and procedures used to determine enthalpy changes directly and indirectly.

    Direct determination measures heat evolved or absorbed in a calorimeter: a known mass of water is heated or cooled by a reaction, and q = mcΔT gives the heat, with c the specific heat capacity of…

    • Point 20 of 20
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Direct determination measures heat evolved or absorbed in a calorimeter: a known mass of water is heated or cooled by a reaction, and q = mcΔT gives the heat, with c the specific heat capacity of water (4.18 J g⁻¹ K⁻¹). Divide q by the moles reacting to get ΔH in kJ mol⁻¹, converting joules to kilojoules. Indirect determination uses Hess's law when a reaction cannot be measured directly, for example combining enthalpy of combustion or formation data, or measuring a related reaction and reversing or scaling steps. Account for heat loss, incomplete combustion and non-standard conditions as sources of error. Always record temperature change, mass and moles precisely.

    What earns the marks

    • Uses q = mcΔT with the mass of water, specific heat capacity 4.18 J g⁻¹ K⁻¹ and the measured temperature change.
    • Converts the heat energy in joules to kilojoules and divides by the number of moles reacting to give ΔH in kJ mol⁻¹.
    • Explains that indirect determination applies Hess's law when a reaction cannot be measured directly, combining or reversing known enthalpy changes.
    • Identifies sources of error such as heat loss to surroundings, incomplete combustion or non-standard conditions.
    • Records the measured quantities (mass, temperature change, moles) needed to calculate the enthalpy change.

    Common mistakes and how to put them right

    • Uses the mass of the fuel or reactant instead of the mass of water heated.

      Put it right: Use the mass of water in q = mcΔT.

    • Leaves the answer in joules per mole.

      Put it right: Convert to kJ mol⁻¹ by dividing by 1000.

    • Ignores heat loss and treats the measured value as exact.

      Put it right: Discuss heat loss as a source of error lowering accuracy.

    Exam tips

    • Write the equation q = mcΔT and substitute values with units before calculating.
    • Convert joules to kilojoules and divide by moles to reach kJ mol⁻¹.
    • State at least one realistic source of error and its effect on the result.

    Try the lesson

    The start of the Enthalpy changes: (h) the techniques and procedures used to determine enthalpy changes directly and indirectly. lesson, made from teaching notes for this specification point.

    Listen

    Direct determination measures heat evolved or absorbed in a calorimeter: a known mass of water is heated or cooled by a reaction, and q = mcΔT gives the heat, with c the specific heat capacity of water (4.18 J g⁻¹ K⁻¹). Divide q by the moles reacting to get ΔH in kJ mol⁻¹, converting joules to kilojoules. Indirect determination uses Hess's law when a reaction cannot be measured directly, for example combining enthalpy of combustion or formation data, or measuring a related reaction and reversing or scaling steps. Account for heat loss, incomplete combustion and non-standard conditions as sources of error. Always record temperature change, mass and moles precisely. A strong answer earns marks for these points. Uses q = mcΔT with the mass of water, specific heat capacity 4.18 J g⁻¹ K⁻¹ and the measured temperature change. Converts the heat energy in joules to kilojoules and divides by the number of moles reacting to give ΔH in kJ mol⁻¹. Explains that indirect determination applies Hess's law when a reaction cannot be measured directly, combining or reversing known enthalpy changes. Identifies sources of error such as heat loss to surroundings, incomplete combustion or non-standard conditions. Exam tip: Write the equation q = mcΔT and substitute values with units before calculating.

    Key words

    Say what each word means before you turn the card.

    Calorimetry and q = mcΔT

    Try answering aloud or in your head before turning the card.

    Molar enthalpy change in kJ mol⁻¹

    Try answering aloud or in your head before turning the card.

    Hess's law for indirect determination

    Try answering aloud or in your head before turning the card.

    Sources of error in enthalpy measurement

    Try answering aloud or in your head before turning the card.

    See every definition
    Calorimetry and q = mcΔT
    A known mass of water is heated or cooled by a reaction, and q = mcΔT gives the heat, with c the specific heat capacity of water (4.18 J g⁻¹ K⁻¹).
    Molar enthalpy change in kJ mol⁻¹
    Divide q by the moles reacting to get ΔH in kJ mol⁻¹, converting joules to kilojoules.
    Hess's law for indirect determination
    Used when a reaction cannot be measured directly, for example combining enthalpy of combustion or formation data, or measuring a related reaction and reversing or scaling steps.
    Sources of error in enthalpy measurement
    Heat loss, incomplete combustion and non-standard conditions are accounted for as sources of error.

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Enthalpy changes: (h) the techniques and procedures used to determine enthalpy changes directly and indirectly.

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge