OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (h) calculation of a standard cell potential by combining two standard…

    Full specification wording

    Redox and electrode potentials: (h) calculation of a standard cell potential by combining two standard electrode potentials

    A standard cell potential is found by combining two standard electrode potentials, each measured under standard conditions against the standard hydrogen electrode.

    • Point 11 of 14
    • 3 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    A standard cell potential is found by combining two standard electrode potentials, each measured under standard conditions against the standard hydrogen electrode. Identify which half-cell is the positive electrode (the one with the more positive E⦵ value) and which is the negative electrode. Then apply E⦵cell = E⦵(positive electrode) − E⦵(negative electrode).

    For example: With E⦵(Cu²⁺/Cu) = +0.34 V and E⦵(Zn²⁺/Zn) = −0.76 V, the cell potential is +0.34 − (−0.76) = +1.10 V. Keep the sign of each value, subtract the more negative from the more positive, and give the answer in volts with the correct sign.

    What earns the marks

    • Selects the half-cell with the more positive E⦵ value as the positive electrode and the other as the negative electrode.
    • Applies E⦵cell = E⦵(positive electrode) − E⦵(negative electrode) with the signs of both values retained.
    • Handles subtraction of a negative value correctly, for example +0.34 − (−0.76) = +1.10 V.
    • States the final cell potential in volts with the correct sign and appropriate significant figures.

    Common mistakes and how to put them right

    • Adds the two E⦵ values without regard to sign.

      Put it right: Subtract the negative electrode value from the positive electrode value instead.

    • Reverses the order of subtraction and reports the wrong sign.

      Put it right: Keep positive electrode minus negative electrode.

    • Drops the sign of a negative E⦵ value during subtraction.

      Put it right: Retain every sign before calculating.

    • Confuses the positive electrode with the anode.

      Put it right: Identify the positive electrode as the one with the more positive E⦵ value.

    Exam tips

    • Write both E⦵ values with their signs before substituting into the equation.
    • Label which half-cell is positive and which is negative before calculating.
    • Check the sign of the answer against which electrode is positive.

    Try the lesson

    The start of the Redox and electrode potentials: (h) calculation of a standard cell potential by combining two standard electrode potentials lesson, made from teaching notes for this specification point.

    Listen

    A standard cell potential is found by combining two standard electrode potentials, each measured under standard conditions against the standard hydrogen electrode. Identify which half-cell is the positive electrode (the one with the more positive E⦵ value) and which is the negative electrode. Then apply E⦵cell = E⦵(positive electrode) − E⦵(negative electrode). For example, with E⦵(Cu²⁺/Cu) = +0.34 V and E⦵(Zn²⁺/Zn) = −0.76 V, the cell potential is +0.34 − (−0.76) = +1.10 V. Keep the sign of each value, subtract the more negative from the more positive, and give the answer in volts with the correct sign. A strong answer earns marks for these points. Selects the half-cell with the more positive E⦵ value as the positive electrode and the other as the negative electrode. Applies E⦵cell = E⦵(positive electrode) − E⦵(negative electrode) with the signs of both values retained. Handles subtraction of a negative value correctly, for example +0.34 − (−0.76) = +1.10 V. States the final cell potential in volts with the correct sign and appropriate significant figures. Exam tip: Write both E⦵ values with their signs before substituting into the equation.

    See it

    A top-down flowchart. The first node reads 'Two standard electrode potentials' and points to 'Identify the more positive E⦵ value'. That node branches to two nodes: 'Positive electrode' and 'Negative electrode (the other half-cell)'. Both of these point to 'Apply E⦵cell = E⦵(positive electrode) − E⦵(negative electrode)', which leads to 'Keep the sign of each value', then to 'Subtract the more negative from the more positive', and finally to 'State the cell potential in volts with the correct sign'.
    It shows the sequence for calculating a standard cell potential: identifying the positive and negative electrodes from two E⦵ values, then applying the subtraction equation and reporting the answer in volts with the correct sign.

    Key words

    Say what each word means before you turn the card.

    Standard electrode potentials

    Try answering aloud or in your head before turning the card.

    Standard cell potential equation

    Try answering aloud or in your head before turning the card.

    Positive and negative electrodes

    Try answering aloud or in your head before turning the card.

    See every definition
    Standard electrode potentials
    Values measured under standard conditions against the standard hydrogen electrode, which are combined to find a standard cell potential.
    Standard cell potential equation
    E⦵cell = E⦵(positive electrode) − E⦵(negative electrode), applied with the signs of both values retained.
    Positive and negative electrodes
    The positive electrode is the half-cell with the more positive E⦵ value and the other half-cell is the negative electrode.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart. The first node reads 'Two standard electrode potentials' and points to 'Identify the more positive E⦵ value'. That node branches to two nodes: 'Positive electrode' and 'Negative electrode (the other half-cell)'. Both of these point to 'Apply E⦵cell = E⦵(positive electrode) − E⦵(negative electrode)', which leads to 'Keep the sign of each value', then to 'Subtract the more negative from the more positive', and finally to 'State the cell potential in volts with the correct sign'.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Redox and electrode potentials: (h) calculation of a standard cell potential by combining two standard electrode potentials

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge