Energy generation and storage — AQA GCSE Design and Technology
Energy generation and storage explained
This section asks you to understand two linked ideas and then apply them.
Read the full explanation
First, how energy is generated: from fossil fuels burned in power stations, from nuclear fission, and from renewable sources such as wind, solar photovoltaic, hydroelectric, tidal and biomass. Second, how energy is stored: in batteries and cells, in capacitors, as chemical fuel, as heat, or as potential energy in pumped storage. You then use this knowledge as the basis for selecting products and power systems, matching the source and storage to the demands of the product. A mains-powered kettle suits a high-power supply, while a cordless drill needs a rechargeable battery sized to its power and run time. Read the specification clause by clause and practise linking each generation or storage method to a product choice.
Your focus
- Describe how energy is generated from at least two different sources
- Explain how energy can be stored until it is needed
- Select and justify a power system for a named product by matching its energy source and storage to the product's demands
Energy generation and storage exam tips
Examiner Tips
- 💡Learn one clear example of a generation method and one of a storage method, and be ready to explain how each suits a named product
- 💡When selecting a power system, state the product's power demand, portability and run time, then justify the source and storage against them
- 💡Use precise terms such as photovoltaic, rechargeable cell or pumped storage rather than vague words like 'electricity'
Common Mistakes
- Treats generation and storage as the same idea; separate how energy is produced from how it is held until needed, then show how each affects a product choice
- Lists energy sources without linking them to a product or power system; connect each source or storage method to a specific selection decision
- Assumes every product should use a battery; match the power system to the product's power demand, portability and run time instead