Energy generation and storage - Fossil fuels — AQA GCSE Design and Technology
Energy generation and storage - Fossil fuels explained
This stem introduces the fossil-fuel route of the energy generation and storage topic.
Read the full explanation
Power from fossil fuels begins with a fuel that was formed from ancient living matter and is burned in a power station. The chemical energy released by burning heats water in a boiler to make high-pressure steam. The steam is directed onto the blades of a turbine and makes the turbine shaft spin. The spinning shaft drives a generator, and the generator converts the rotational motion into electrical energy that passes to the grid. Coal, oil and gas all follow this chain, differing mainly in the fuel burned and the emissions produced. Learn the sequence fuel, heat, steam, turbine, generator, electricity, and be ready to name the energy transfers at each stage.
Your focus
- Describe how burning a fossil fuel generates electrical power
- Sequence the stages from fuel to electricity in a fossil-fuel power station
- Identify the energy transfers at each stage of fossil-fuel generation
Energy generation and storage - Fossil fuels exam tips
Marking Points
- Identifies a fossil fuel as a fuel formed from the remains of ancient living organisms and burned to release chemical energy
- States that burning the fuel heats water in a boiler to produce high-pressure steam
- Explains that the steam turns a turbine, whose rotating shaft drives a generator to produce electrical energy
- Describes the overall chain from fuel through heat and steam to turbine rotation and generator output
- Names the energy transfers as chemical to thermal, thermal to kinetic, and kinetic to electrical
Examiner Tips
- 💡Write the chain in order as fuel, heat, steam, turbine, generator, electricity so no stage is missed
- 💡Name the energy transfer at each stage rather than only naming the components
- 💡Link each fossil fuel to the same power-station sequence and note the emissions produced when it burns
Common Mistakes
- Confuses the turbine with the generator; keep the turbine as the rotating blades and the generator as the device producing electricity
- Claims the fuel burns inside the generator; place combustion in the boiler or furnace that raises steam
- Omits the steam stage and jumps from burning fuel to spinning turbine; include the heated water and steam as the link