Skip to topic
    ← Back to course topics

    Specialist techniques and processes - Surface treatments and finishes — AQA GCSE Design and Technology

    Specialist techniques and processes - Surface treatments and finishes explained

    Surface treatment and finishing covers the processes used to protect a material, improve its appearance or change how it feels and performs.

    Read the full explanation

    Applying an appropriate finish means matching the method to the material and the job: sanding timber to a smooth surface before applying a wood stain, then sealing with varnish or wax; cleaning and degreasing metal before painting or powder coating so the coating bonds; using an undercoat and topcoat on painted surfaces; or applying an oil or lacquer to protect a food-contact wooden item. Preparation matters as much as application: remove dust, work in a suitable environment and build up thin, even coats. The finish chosen must suit the product's use, cost and appearance, and the learner should be able to select and justify a finish for a given material and context.

    Your focus

    1. Select an appropriate surface treatment or finish for a given material and product.
    2. Describe the preparation and application steps for a chosen finish.
    3. Justify a finish by reference to protection, appearance or the product's intended use.

    Specialist techniques and processes - Surface treatments and finishes exam tips

    Marking Points
    • Identifies a surface treatment or finish that suits the stated material, such as varnish for timber or powder coating for metal.
    • Explains the preparation step needed before applying the finish, such as sanding timber or degreasing metal.
    • States a reason for applying the finish, such as protection, improved appearance or changed surface properties.
    • Describes how the finish is applied, such as building up thin even coats or using an undercoat before a topcoat.
    • Links the chosen finish to the product's intended use, cost or working environment.
    Examiner Tips
    • 💡Name the material and the finish together so the examiner sees the match.
    • 💡Include the preparation step, because it is often worth marks on its own.
    • 💡Give a reason for the finish linked to the product's use rather than describing appearance alone.
    • 💡Keep application steps in the correct order: prepare, apply, then protect or cure.
    Common Mistakes
    • Applies a finish without preparing the surface; prepare by sanding timber or cleaning and degreasing metal first.
    • Chooses a finish that does not suit the material, such as waxing bare steel for corrosion protection; select a finish matched to the material and use.
    • Applies one thick coat instead of several thin coats; build up thin, even layers for a better result.
    • Ignores the purpose of the finish; state whether it protects, improves appearance or changes the surface.