Alternative processes that can be used to manufacture thermoforming and thermosetting polymers products to different scales of production — Edexcel GCSE Design and Technology
Alternative processes that can be used to manufacture thermoforming and thermosetting polymers products to different scales of production explained
This heading introduces the alternative polymer processes you must know for the specification: the methods used to shape thermoforming polymers (which soften on heating and can be reshaped) and thermosetting polymers (which set permanently and cannot be remelted).
Read the full explanation
You need to recognise each named process, understand what it does to the polymer and match it to a scale of production, from one-off and batch through to mass and continuous production. Learn each process as a short chain: what form the polymer starts in, how heat or pressure shapes it, what tooling is needed and why that tooling suits a particular scale. For example, a process needing an expensive metal mould repays its cost only at high volume, whereas a simple former can serve a one-off. Expect multiple-choice questions that name a process and ask for its product, its polymer type or its suitable scale.
Your focus
- Name the alternative processes used to manufacture products from thermoforming and thermosetting polymers
- Explain how each process shapes the polymer and what tooling it requires
- Select the process that suits a stated scale of production and justify the choice
Alternative processes that can be used to manufacture thermoforming and thermosetting polymers products to different scales of production exam tips
Marking Points
- Identifies the named polymer process and states the product or component it typically makes
- Distinguishes thermoforming polymers, which can be reheated and reshaped, from thermosetting polymers, which cure permanently
- Links each process to a scale of production and justifies the link through tooling cost, cycle time or labour input
- Recognises that the same product family can be made at different scales by choosing a different process
Examiner Tips
- 💡Read the whole question stem to see whether it asks for a process, a polymer type or a scale before choosing an option
- 💡Eliminate options that describe a process for the wrong polymer type, since thermoforming and thermosetting behaviour differ
- 💡Where two options seem plausible, choose the one whose tooling and output best match the scale named in the question
Common Mistakes
- Treats thermosetting polymers as remeltable; remember that once cured they cannot be softened and reshaped
- Assumes every polymer process suits mass production; check the tooling cost and cycle time before choosing a scale
- Confuses the named processes with each other; learn one distinctive feature of each, such as the use of a mould or a former
- Ignores the scale of production in the question; read whether one-off, batch or continuous output is being asked for