Skip to topic
    โ† Back to course topics

    Testing and evaluation โ€” Edexcel GCSE Design and Technology

    Testing and evaluation explained

    A life cycle assessment traces a product through its stages: extracting and processing raw materials, manufacturing, distribution, use and end-of-life disposal or recycling.

    Read the full explanation

    For your prototype, work through each stage and identify the environmental impacts, such as energy use, carbon emissions, water use, waste and pollution. Quantify where you can, for example the mass of material in grams, the number of components or the transport distance in kilometres. Then weigh the impacts against each other to judge the overall environmental impact and suggest realistic improvements, such as choosing a recycled material, reducing material mass, designing for disassembly or improving recyclability. The judgement must follow from the evidence gathered at each stage.

    Your focus

    1. Carry out a life cycle assessment covering all stages of the prototype's life.
    2. Assess the environmental impact at each stage using quantified evidence where possible.
    3. Propose and justify improvements that reduce the prototype's environmental impact.

    Testing and evaluation exam tips

    Marking Points
    • Identifies the life cycle stages of the prototype, covering raw material extraction, manufacture, distribution, use and end-of-life.
    • Describes the environmental impacts at each stage, such as energy consumption, emissions, waste or resource depletion.
    • Quantifies impacts where possible, for example material mass in grams, component count or transport distance in kilometres.
    • Weighs the impacts across stages to reach an overall judgement about the prototype's environmental impact.
    • Proposes realistic improvements, such as using recycled material, reducing mass or designing for disassembly, and explains their effect.
    Examiner Tips
    • ๐Ÿ’กName each life cycle stage explicitly as a heading or opening phrase so coverage is clear.
    • ๐Ÿ’กInclude at least one quantified figure per stage where possible to strengthen the evidence base.
    • ๐Ÿ’กLink each suggested improvement to the specific stage and impact it addresses.
    • ๐Ÿ’กFinish with a short overall judgement that summarises the balance of impacts across the whole life cycle.
    Common Mistakes
    • Considers only one stage, usually disposal, and ignores material extraction, manufacture, distribution and use; address every stage of the life cycle.
    • Makes general statements about being eco-friendly without linking them to specific stages or evidence; tie each claim to a stage and a measurable impact.
    • Suggests improvements without explaining how they reduce environmental impact; state the mechanism, such as lower material mass reducing raw material demand.
    • Reaches an overall judgement that is not supported by the stage-by-stage evidence; make the conclusion follow from the impacts identified.