How electronic systems provide functionality to products and processes, including sensors and control devices to respond to a variety of inputs, and devices to produce a range of outputs — Edexcel GCSE Design and Technology
How electronic systems provide functionality to products and processes, including sensors and control devices to respond to a variety of inputs, and devices to produce a range of outputs explained
An electronic system takes an input, processes it and produces an output.
Read the full explanation
The output stage converts the processed signal into a form a user can detect or a mechanism can use, so it is the part that actually does the job in a product. Outputs include light (lamps, LEDs), sound (buzzers, speakers), movement (motors, solenoids) and heat. In a torch, the switch is the input, the circuit is the process and the lamp is the output; in a fan, a temperature sensor is the input and the motor turning the blades is the output. The output device is chosen to match the required effect and the available power, and a driver stage may be needed because a processor output cannot supply enough current on its own.
Your focus
- Identify the output stage within an electronic system.
- Describe the physical effect produced by a named output device.
- Explain why an output may need a driver stage in a product.
How electronic systems provide functionality to products and processes, including sensors and control devices to respond to a variety of inputs, and devices to produce a range of outputs exam tips
Marking Points
- Identifies the output as the part of a system that produces the intended effect, such as light, sound, movement or heat.
- Explains that the output stage converts a processed signal into a usable form for the user or mechanism.
- Places the output correctly after input and process in the system sequence.
- Links a named output device to a named product function, such as a motor turning fan blades.
- Recognises that some outputs need a driver stage because the processor cannot supply enough current.
Examiner Tips
- 💡Read the question for the word 'output' and eliminate options that describe sensors or processors.
- 💡Match each option to a physical effect (light, sound, movement, heat) before choosing.
- 💡Where an option mentions a driver, check whether the device needs more current than a processor can give.
- 💡Use a familiar product such as a torch or fan to test each option against real behaviour.
Common Mistakes
- Names the sensor as the output; correct this by identifying the sensor as the input device and the lamp, buzzer or motor as the output.
- Treats the output as the processing stage; correct this by explaining that the processor decides and the output device acts.
- Assumes any output can run directly from a processor pin; correct this by noting that higher-current devices need a driver or relay.
- Describes the output only as 'electricity'; correct this by naming the physical effect produced, such as light or movement.