Skip to topic
    ← Back to course topics

    Review of chosen design — Edexcel GCSE Design and Technology

    Review of chosen design explained

    This criterion asks you to show that you have thought through how the chosen design would actually be made.

    Read the full explanation

    For each major part, name the material and say why it suits the function, cost, availability and sustainability. Identify the techniques and processes needed, such as cutting, joining, shaping, moulding or finishing, and match each to the material and scale of production. Consider the equipment and skills required, and note any process that limits the design, for example a minimum radius on a bend or a drying time between coats. A short manufacturing plan or flow chart with annotated stages makes your reasoning visible. Reviewing these choices against the design solution is the assessed skill, so explain trade-offs rather than listing materials and processes in isolation.

    Your focus

    1. Identify the materials, techniques and processes needed to make the chosen design solution.
    2. Justify material and process choices by function, cost, sustainability and scale of production.
    3. Explain how process constraints affect the design and present a manufacturing sequence.

    Review of chosen design exam tips

    Marking Points
    • Names the materials for each major part and justifies each choice by function, cost, availability or sustainability.
    • Identifies the techniques and processes needed to make the solution, such as cutting, joining, shaping or finishing.
    • Matches each process to the material and to the scale of production, for example one-off or batch.
    • Explains how a process constraint, such as a minimum bend radius or a drying time, affects the design.
    • Presents a manufacturing plan or sequence of stages that shows the order of making.
    Examiner Tips
    • 💡Use a table with columns for part, material, justification, process and equipment to keep the reasoning clear.
    • 💡Add a simple flow chart showing the order of manufacturing stages.
    • 💡Name at least one process constraint and explain how the design responds to it.
    Common Mistakes
    • Lists materials without justifying them; add a reason for each choice linked to function, cost or sustainability.
    • Names processes that do not suit the chosen material or scale of production; match each process to the material and quantity.
    • Ignores how a process limits the design; state the constraint and explain how the solution accommodates it.