Skip to topic
    ← Back to course topics

    Manufacture — Edexcel GCSE Design and Technology

    Manufacture explained

    Manufacture of a prototype means choosing and then actually using six things together.

    Read the full explanation

    You select a material that suits the job's function, then apply a range of tools: marking-out tools such as a try square or marking gauge, hand tools such as a tenon saw or file, and machinery such as a pillar drill or scroll saw. You apply a range of techniques, for example measuring, cutting, drilling, shaping and joining. You use fixtures, templates, jigs and/or patterns to hold work or repeat a shape accurately. You add components such as hinges, screws or a switch, and you apply surface treatments and finishes such as sanding sealer, paint or oil. Selection means justifying the choice; application means carrying it out safely on the actual prototype.

    Your focus

    1. Select a material and justify it against the prototype's function.
    2. Apply marking-out tools, hand tools and machinery correctly during manufacture.
    3. Explain how a jig, template, fixture or pattern improves accuracy.
    Show all 4 objectives
    1. Choose components and a surface finish suited to the material and purpose.

    Manufacture exam tips

    Marking Points
    • Identifies a material suited to the prototype's function and justifies the choice.
    • Names marking-out tools, hand tools and machinery and explains how each is applied.
    • Describes a range of techniques such as measuring, cutting, drilling and joining used on the prototype.
    • Explains how a fixture, template, jig or pattern improves accuracy or repeatability.
    • Selects appropriate components and states how they are fitted.
    • Chooses a surface treatment or finish suited to the material and purpose.
    Examiner Tips
    • 💡Read the question for the word 'select' or 'apply' and answer that verb directly.
    • 💡Give one clear reason for each material, tool or finish choice rather than a bare list.
    • 💡Keep tool names specific, for example 'marking gauge' rather than 'a measuring thing'.
    Common Mistakes
    • Lists tools without saying how they are applied; link each tool to a specific making step.
    • Treats a jig and a template as the same thing; state what each does to guide or hold the work.
    • Chooses a finish that does not suit the material; match the finish to the material and use.