Skip to topic
    ← Back to course topics

    Carry out maintenance activities on instrumentation and control equipment — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with health and safety and other relevantregulations, directives and guidelines
    2. Demonstrate the required behaviours in line with the job role and companyobjectives
    3. Lead a maintenance team by carrying out all the following:1.1 communicate the maintenance activities to the team1.2 involve the team in planning how the maintenance activities will beundertaken1.3 allocate specific maintenance activities to each team member1.4 involve the team in identifying improvements that could be made to themaintenance process and/or procedures1.5 encourage the team and/or individuals to take the lead whereappropriate
    Show all 11 objectives
    1. Produce and update relevant maintenance schedules and plans
    2. Review and update maintenance procedures and plans to include three of thefollowing:2.1 preventive maintenance (routine inspections, and adjustments)2.2 corrective maintenance (activities identified from preventativemaintenance activities)2.3 predictive maintenance (analysis of the equipment’s condition)2.4 reactive maintenance (unexpected equipment/component failure)2.5 maintenance prevention (equipment/component design anddevelopment)Plus supporting documentation associated with two of the following:2.6 equipment performance2.7 equipment downtime/failure2.8 overall equipment effectiveness (OEE)2.9 maintenance costs2.10 health and safety2.11 staff development and training2.12 maintenance procedures/instructions2.13 operator manuals/working instructions2.14 regulatory compliance
    3. Lead maintenance activities within the limits of their personal authority
    4. Carry out the maintenance activities in the specified sequence and in an agreedtimescalePage 3 of 9REATC4-026 Issue 1.0S3 Collect fault diagnostic evidence from four of the following sources:3.1 the person or operator who reported the fault3.2 equipment self-diagnosis3.3 test instrument measurements (such as multimeter, oscilloscope, logicprobe, signal tracer, signal generator)3.4 recording devices3.5 plant/equipment records3.6 circuit outputs/computer display (such as pressure, flow, temperature)3.7 equipment outputs3.8 sensory input (sight, sound, smell, touch)S4 Use a range of fault diagnostic techniques, to include two of the following:4.1 half-split technique4.2 input/output technique4.3 injection and sampling4.4 six point technique4.5 emergent sequence4.6 unit substitution4.7 function/performance testing4.8 equipment self-diagnostics
    5. Use a variety of diagnostic aids, to include two of the following:5.1 logic diagrams5.2 fault analysis charts (such as fault trees)5.3 flow charts or algorithms5.4 manufacturers' manuals5.5 probability charts/reports5.6 troubleshooting guides5.7 computer-aided test equipment5.8 electronic aids
    6. Use all of the following fault diagnostic procedures:6.1 inspection (such as breakages, wear/deterioration, signs of overheating,loose connections/fittings)6.2 operation (such as manual switching off and on, automaticswitching/timing/sequencing, outputs)6.3 measurement (such as voltage, current, continuity, logic state, noise,frequency, signal shape, level)S7 Use four of the following types of test equipment to aid fault diagnosis:7.1 multimeter7.2 pressure sources7.3 oscilloscope7.4 digital pressure indicators7.5 signal sources/generator7.6 standard test gaugesPage 4 of 9REATC4-026 Issue 1.07.7 current injection devices7.8 special purpose test equipment7.9 logic probe7.10 signal tracer7.11 other specific test equipment
    7. Find faults that have resulted in two of the following breakdown categories:8.1 intermittent problem8.2 partial failure/out-of-specification output8.3 complete breakdowns
    8. Carry out all of the following during the maintenance activity:9.1 obtain and use the correct issue of company and/or manufacturer’sdrawings and maintenance documentation9.2 adhere to procedures or systems in place for risk assessment, COSHH,personal protective equipment and other relevant safety regulations andprocedures to realise a safe system of work9.3 e

    Carry out maintenance activities on instrumentation and control equipment assessment help

    Unit assessment details

    Loading assessment details…