Carry out removal of components from telecoms assets — EAL Vocational Motor Vehicle & Transport
Learning outcomes
- Work safely at all times, complying with your organisation's procedures, following the health and safety legislation, regulations and safe working practices and procedures, from the following as applicable to the work location and activities:1.1 organisation's safety management system1.2 relevant sections of the HASWA1.3 COSHH1.4 safe work plans1.5 track access restrictions1.6 track work instructions1.7 track possession1.8 task risk control sheets1.9 current rule book1.10 regulations for working under OHLE and in the vicinity of DC lines (where appropriate)1.11 equipment disconnections1.12 manual handling regulations1.13 RIDDOR1.14 safety sign regulations1.15 PPE2.
- Identify and analyse any necessary changes to safety requirements on arriving at site, including prompt reporting to the relevant person(s) related to access to two of the following types of site locations:2.
- internal (such as telecoms box, equipment room)2.
Show all 17 objectives
- areas to which the public have access2.
- confined spaces2.
- elevated structures3. Locate and identify the component(s) to be removed4. Source and interpret all relevant diagrams and specifications to ensure that removal complies with one of the following:4.1 infrastructure guidelines and standard operating procedures4.2 equipment manufacturer's documents4.3 BS, ISO and/or BS EN standards4.4 TMTH4.5 other industry specific telecoms standards/specifications: ref: ( )5.
- Establish, and where appropriate, mark component(s) orientation for re-assembly6.
- Ensure that any stored energy or substances are released safely and correctly7. Label relevant wiring and components and note the configuration settings8.
- Follow the required procedure for disconnection, when isolating the working area from other systems, disconnect the following connections applicable to the type of equipment:8.
- mechanical8.
- other specific type of termination/connection: ref: ( )9. Remove the required component(s) using approved procedures, tools and techniques and in a way that does not interfere with any operational railway systems. Remove two types of telecoms equipment from group A using tools and equipment as applicable from group B:Group A: remove components from two of the following types of telecoms equipment:9.1 transmission systems9.2 bearer circuits9.3 telecoms bearers carrying signalling circuits9.4 SCADA9.5 operational telephones9.6 switches and systems (such as telephone exchanges & concentrators)9.7 railway operational information systems9.8 PA and CCTV9.9 operational CCTV (such as OPO/DOO)9.10 GSM-R9.11 other industry specific telecoms equipment: ref: ( )Group B
- use approved/calibrated tools and equipment as applicable to the components being removed:9.12 power tools9.13 hand tools9.14 wire and cable strippers/cutters9.15 IDC tools9.16 termination tools9.17 wrenches9.18 soldering irons9.19 manual handling equipment10.
- Use authorised practices where existing instructions are insufficient11. Take suitable precautions to prevent damage to component(s) during removal12. Check the condition of the removed component(s) and record those that will require replacing13. Provide appropriate electrostatic protection for electronic equipment, where applicable14. Store or discard the removed component(s) in line with your organisation's procedures15.
- Ensure that interference with other systems is minimised, and equipment and systems other than those being maintained are not disturbed without authority16. Deal promptly and effectively with problems within your control and report those that cannot be resolved17.
- Complete all relevant documentation accurately and in accordance with your organisation's procedures
- complete one of the following:17.1 job card17.2 TMTH17.3 equipment logs and action report17.4 company reporting procedures17.5 other industry specific equipment records.1K.
- Describe the relevant health and safety legislation, regulations and safe working practices and procedures as app
Carry out removal of components from telecoms assets assessment help
Unit assessment details
Loading assessment details…