AQA · A-Level · Accounting
Course version: 7127 · Version from Sept 2017
Categorisation of costs by behaviour and understanding of terms.
Full specification wording
Marginal costing: Categorisation of costs by behaviour and understanding of terms.
Cost behaviour describes how a total cost reacts when the level of activity changes within a relevant range.
- Point 1 of 20
Study notes
From the teaching notes for this specification point.
The idea
Cost behaviour describes how a total cost reacts when the level of activity changes within a relevant range. A variable cost changes in total in direct proportion to output while staying constant per unit, for example direct materials at £4 per unit giving £400 at 100 units and £800 at 200 units. A fixed cost stays constant in total over the relevant range but falls per unit as output rises, such as factory rent of £2,000 per month. A semi-variable (mixed) cost contains both elements, for example a utility bill with a standing charge plus a rate per machine hour. A stepped fixed cost is constant within a band of activity then jumps. Steer clear of confusing total and per-unit behaviour, and of treating a cost as fixed when it varies with activity.
What earns the marks
- Identifies a variable cost as one whose total changes in direct proportion to the level of activity while the cost per unit stays constant.
- Explains that a fixed cost remains constant in total within the relevant range but decreases per unit as activity rises.
- Recognises a semi-variable cost as containing both a fixed and a variable element, such as a standing charge plus a usage rate.
- Distinguishes a stepped fixed cost, which is constant within a band of activity and then increases at a threshold, from a truly variable cost.
- Applies the correct term to a given numerical example by comparing total cost at two activity levels rather than relying on the label alone.
Common mistakes and how to put them right
Describes a fixed cost as constant per unit.
Put it right by stating that a fixed cost is constant in total but falls per unit as output rises.
Treats a semi-variable cost as purely variable.
Put it right by identifying the fixed standing element separately from the variable usage element.
Assumes every cost is either wholly fixed or wholly variable.
Put it right by allowing for mixed and stepped costs within the relevant range.
Exam tips
- Read the activity levels in the question and compare total cost at two points before choosing a category.
- Check whether the question asks about total cost or cost per unit, because the behaviour differs between the two.
- Eliminate options that describe per-unit behaviour when the data show total cost changing in proportion to output.
Try the lesson
The start of the Marginal costing: Categorisation of costs by behaviour and understanding of terms. lesson, made from teaching notes for this specification point.
Have a go first
A factory pays £4,000 per month in rent regardless of how many units it produces. How is this rent classified by cost behaviour?
There is more to this lesson
The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge
Test your understanding of Marginal costing: Categorisation of costs by behaviour and understanding of terms.
Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge