AQA · GCSE · Chemistry

    Course version: 8462 · Version from Sept 2018

    Using resources

    This topic covers how we sustainably use Earth's resources, from making water safe to drink, to extracting metals without traditional mining, to evaluating the environmental impact of products. It's heavily tested in exams because it links core chemistry to real-world environmental challenges.

    • 8 min read
    • 3 worked examples
    • 5 practice questions
    • 6 key terms

    Study Notes

    Overview

    Welcome to Using Resources (Topic 4.10). This section is fundamentally about sustainability: how we meet the needs of the current generation without compromising the ability of future generations to meet their own needs. In Chemistry, this means understanding the difference between finite and renewable resources, and finding ways to reduce our reliance on finite ones.

    This topic is crucial because examiners love to test your ability to apply chemical principles to real-world scenarios. You won't just be balancing equations; you'll be evaluating the environmental impact of different processes, comparing metal extraction methods, and understanding the compromises made in industrial processes like the Haber process. It connects deeply to your knowledge of bonding, rates of reaction, and quantitative chemistry.

    Expect a mix of short recall questions (e.g., "State the conditions for the Haber process") and longer, extended-response questions (e.g., "Evaluate the use of phytomining compared to traditional smelting").

    Key Concepts

    Concept 1: Potable Water vs. Pure Water

    A fundamental distinction that examiners test every year is the difference between potable water and pure water.

    Pure water contains only H_2O molecules and absolutely nothing else. It boils at exactly 100^{\circ}C.
    Potable water is water that is safe to drink. It contains dissolved salts and minerals, but at levels low enough that they do not cause harm, and it is free from harmful microbes.

    To produce potable water from fresh water sources (like lakes or rivers), three main stages are used:

    1. Sedimentation: The water is stored in a large reservoir. Gravity causes larger solid particles (like grit and sand) to settle at the bottom.
    2. Filtration: The water is passed through filter beds made of sand and gravel. This removes smaller, suspended solid particles.
    3. Sterilisation: The water is treated to kill harmful microorganisms (bacteria and viruses). This is usually done by bubbling chlorine gas through the water, but ozone or ultraviolet (UV) light can also be used.

    Stages of Potable Water ProductionOpen full-size image (opens in a new tab)

    If fresh water is scarce, potable water can be produced from sea water by desalination. This can be done via distillation (boiling the water and condensing the steam) or reverse osmosis (forcing water through a membrane that traps the salt). Both methods require enormous amounts of energy, making them very expensive.

    Concept 2: Alternative Metal Extraction

    The Earth's supply of metal ores (especially copper) is limited. Traditional extraction involves mining high-grade ores and smelting them (heating with carbon), which requires huge amounts of energy and damages the landscape. To be more sustainable, we now use biological methods to extract metals from low-grade ores (ores containing only a small percentage of the metal).

    Phytomining uses plants to absorb metal compounds from the soil. The plants are harvested and burned, producing an ash that contains a high concentration of the metal compounds.
    Bioleaching uses bacteria to break down low-grade ores. The bacteria produce a solution called a leachate, which contains the metal ions.

    In both cases, the metal must still be extracted from the compound or leachate. For copper, this is usually done by displacement using scrap iron (since iron is more reactive than copper) or by electrolysis.

    Alternative Metal Extraction MethodsOpen full-size image (opens in a new tab)

    Why this works: These methods are much slower than smelting, but they allow us to economically extract metals from waste rock or low-grade ores, reducing the need to mine fresh ore and saving vast amounts of energy.

    Concept 3: Life Cycle Assessments (LCAs)

    A Life Cycle Assessment (LCA) evaluates the environmental impact of a product across its entire lifespan. The four stages are:

    1. Extracting and processing raw materials: e.g., mining ores, drilling for oil. This uses energy and damages habitats.
    2. Manufacturing and packaging: e.g., energy used in factories, chemical waste produced.
    3. Use and operation during its lifetime: e.g., emissions from driving a car, water used by a washing machine.
    4. Disposal at the end of its useful life: e.g., space taken up in landfill, energy used to transport waste, pollution from incineration.

    Examiner Insight: Examiners frequently ask you to compare the LCAs of two products (like plastic vs. paper bags). The key is to recognise that LCAs are not entirely objective. While we can easily measure the energy used or water consumed, assigning a value to the visual impact of a mine or the environmental damage of plastic waste involves subjective value judgements.

    Concept 4: Corrosion and its Prevention

    Corrosion is the destruction of materials by chemical reactions with substances in the environment. The most common example is rusting, which specifically refers to the corrosion of iron (and its alloy, steel).

    For iron to rust, both oxygen and water must be present. The chemical equation is:
    Iron + Oxygen + Water \rightarrow Hydrated Iron(III) Oxide

    We can prevent corrosion by applying a coating that acts as a physical barrier, such as greasing, painting, or electroplating.
    Another method is sacrificial protection. A more reactive metal (like zinc or magnesium) is attached to the iron. Because it is more reactive, the water and oxygen react with the sacrificial metal instead of the iron. Galvanising is a specific type of sacrificial protection where iron is coated in a layer of zinc.

    Concept 5: The Haber Process

    The Haber process is used to manufacture ammonia (NH_3), which is essential for producing nitrogen-based fertilisers.

    The raw materials are:

    • Nitrogen: Extracted from the air.
    • Hydrogen: Obtained from natural gas (methane).

    The reaction is reversible:
    N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g) (The forward reaction is exothermic)

    The conditions used are:

    • Temperature: 450^{\circ}C
    • Pressure: 200 atmospheres
    • Catalyst: Iron

    The Haber ProcessOpen full-size image (opens in a new tab)

    The Compromise Temperature: This is a classic exam question. Because the forward reaction is exothermic, a lower temperature would shift the equilibrium to the right, giving a higher yield of ammonia. However, a lower temperature means the reaction would be too slow. 450^{\circ}C is a compromise that provides a reasonable yield at a fast enough rate.

    The Pressure: A higher pressure favours the forward reaction (as there are 4 moles of gas on the left and 2 on the right), increasing the yield. However, extremely high pressures are dangerous and expensive to maintain, so 200 atmospheres is used as an economic compromise.

    Mathematical/Scientific Relationships

    • Haber Process Equation: N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g) (Must memorise)
    • Rusting Equation: Iron + Oxygen + Water \rightarrow Hydrated Iron(III) Oxide (Must memorise)
    • Displacement of Copper: Cu^{2+}(aq) + Fe(s) \rightarrow Cu(s) + Fe^{2+}(aq) (Must memorise)

    Practical Applications

    • Fertilisers (NPK): Formulated fertilisers contain Nitrogen (N), Phosphorus (P), and Potassium (K) to improve agricultural productivity. Ammonia from the Haber process is reacted with acids to make ammonium salts (like ammonium nitrate) for these fertilisers.
    • Recycling: Metals, glass, building materials, clay ceramics, and most plastics can be recycled. This reduces the use of finite resources, energy consumption, and environmental impacts compared to extracting new materials.

    Audio Revision

    Listen to our 10-minute podcast episode covering all the key concepts, common mistakes, and exam tips for this topic.

    Check what you remember

    Read the wording for your board, then hide it and explain Potable Water in your own words. Rough notes are fine. This is a self-check, with no mark or grade.

    Reference: AQA

    Water that is safe to drink. It is not chemically pure as it contains dissolved substances.
    AQA

    Interactive Diagrams

    2 interactive diagrams to visualise key concepts

    Conceptual Flow Outline

    Raw Water Source
    ➔Sedimentation
    Sedimentation
    ➔Large particles settleFiltration
    Filtration
    ➔Fine particles removedSterilisation
    Sterilisation
    ➔Microbes killedPotable Water

    The stages of producing potable water from fresh water.

    Conceptual Flow Outline

    Low Grade Ore
    ➔Extraction Method
    Extraction Method
    ➔PhytominingPlants absorb ions
    ➔BioleachingBacteria added
    Plants absorb ions
    ➔Harvest & Burn
    Harvest & Burn
    ➔Ash + Acid
    Ash + Acid
    ➔Electrolysis / Displacement
    Bacteria added
    ➔Leachate produced
    Leachate produced
    ➔Electrolysis / Displacement
    Electrolysis / Displacement
    ➔Pure Metal

    Alternative methods for extracting metals from low-grade ores.

    Worked Examples

    3 worked examples — open one to explore the question and available guidance.

    Practice Questions

    Try the question, then reveal an answer plan or example response

    Q1

    State the difference between potable water and pure water. (1 mark)

    1 mark
    foundation

    Hint: Think about what is dissolved in the water.

    Q2

    Explain how sacrificial protection prevents iron from rusting. (2 marks)

    2 marks
    standard

    Hint: Think about the reactivity series.

    Q3

    Explain why the Haber process uses a pressure of 200 atmospheres rather than 1000 atmospheres. (3 marks)

    3 marks
    challenging

    Hint: Higher pressure increases yield, so why wouldn't a factory use the highest pressure possible?

    Q4

    Describe the process of phytomining to extract copper. (3 marks)

    3 marks
    standard

    Hint: What do the plants do, and what happens to them afterwards?

    Q5

    A student states that Life Cycle Assessments (LCAs) provide a perfectly accurate measure of a product's environmental impact. Explain why this statement is incorrect. (2 marks)

    2 marks
    challenging

    Hint: Can we measure everything objectively?

    Ready to test yourself interactively?

    Active recall beats reading alone. Answer questions on Using resources with instant AI scoring and mark scheme guidance.

    Start interactive practice

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Exam technique

    How to turn what you know into marks

    How to approach the question

    For 'Evaluate' questions (often 4-6 marks), draw a quick T-chart in the margin for Pros and Cons before writing. For 'Explain the conditions' questions (like the Haber process), always link the condition to BOTH rate and yield.

    How to structure your answer

    For 6-mark evaluations: Paragraph 1 (Advantages of Method A), Paragraph 2 (Disadvantages of Method A / Advantages of Method B), Paragraph 3 (A brief, justified conclusion).

    Timing

    Approximately 1 minute per mark, so a 6-mark evaluation question should take about 6-7 minutes to plan and write.

    Common pitfalls

    • Stating that potable water is 'pure'. Examiners will immediately dock a mark. Use 'safe to drink'.
    • Saying sterilisation 'removes' bacteria. It doesn't remove them; it 'kills' them.
    • Forgetting to mention that Life Cycle Assessments involve subjective value judgements.

    What the command words want

    Compare
    Identify similarities AND differences. You must mention both items in your answer.
    Explain
    Say WHY it happens. E.g., 'Explain why 450C is used' requires you to talk about the compromise between rate and yield.
    Describe
    Say what happens or what the process is. E.g., 'Describe phytomining' = 'Plants absorb metal ions, are harvested, and burned.'
    Evaluate
    Give pros and cons of both sides, and provide a final judgement.
    State/Give
    Brief factual answer - 1-2 words or a short phrase. No explanation needed.
    Watch or listen (optional)
    🎙 Podcast Episode
    Using resources
    0:00-0:00

    Test your understanding of Using resources

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge