OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    Acids, bases and buffers: (ii) strong bases, using Kw

    For a strong base such as NaOH or KOH, the hydroxide ion concentration equals the concentration of the base because each formula unit dissociates fully.

    • Point 13 of 26
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    For a strong base such as NaOH or KOH, the hydroxide ion concentration equals the concentration of the base because each formula unit dissociates fully. Kw = [H⁺][OH⁻] = 1.00 × 10⁻¹⁴ mol² dm⁻⁶ at 298 K. Rearranging gives [H⁺] = Kw ÷ [OH⁻], and pH = −log₁₀[H⁺]. For 0.0100 mol dm⁻³ NaOH, [OH⁻] = 0.0100 mol dm⁻³, so [H⁺] = 1.00 × 10⁻¹⁴ ÷ 0.0100 = 1.00 × 10⁻¹² mol dm⁻³ and pH = 12.00. For a diprotic strong base such as Ba(OH)₂, [OH⁻] is twice the base concentration. Remember that Kw changes with temperature, so use the value quoted for the stated temperature.

    What earns the marks

    • Uses Kw = [H⁺][OH⁻] with the value appropriate to the stated temperature.
    • Sets [OH⁻] equal to the concentration of a monoprotic strong base because dissociation is complete.
    • Doubles the base concentration to obtain [OH⁻] for a strong base that releases two hydroxide ions per formula unit.
    • Rearranges to [H⁺] = Kw ÷ [OH⁻] and substitutes the correct concentrations.
    • Calculates pH as the negative logarithm to base ten of [H⁺] and reports it to an appropriate number of decimal places.

    Common mistakes and how to put them right

    • Substitutes the base concentration directly for [H⁺].

      Put it right: Use [H⁺] = Kw ÷ [OH⁻] first.

    • Treats a diprotic strong base as releasing one hydroxide ion.

      Put it right: Multiply the base concentration by two.

    • Uses a Kw value for a different temperature.

      Put it right: Select the value matching the temperature given in the question.

    • Reports pH without taking the negative logarithm.

      Put it right: Apply pH = −log₁₀[H⁺] to the hydrogen ion concentration.

    Exam tips

    • Write the dissociation equation first so the mole ratio of OH⁻ to base is explicit.
    • Keep Kw in mol² dm⁻⁶ and check that the units of [H⁺] come out as mol dm⁻³.
    • Estimate the answer before calculating: a strong base at 0.01 mol dm⁻³ should give a pH near 12 at 298 K.

    Try the lesson

    The start of the Acids, bases and buffers: (ii) strong bases, using Kw lesson, made from teaching notes for this specification point.

    Listen

    For a strong base such as NaOH or KOH, the hydroxide ion concentration equals the concentration of the base because each formula unit dissociates fully. Kw = [H⁺][OH⁻] = 1.00 × 10⁻¹⁴ mol² dm⁻⁶ at 298 K. Rearranging gives [H⁺] = Kw ÷ [OH⁻], and pH = −log₁₀[H⁺]. For 0.0100 mol dm⁻³ NaOH, [OH⁻] = 0.0100 mol dm⁻³, so [H⁺] = 1.00 × 10⁻¹⁴ ÷ 0.0100 = 1.00 × 10⁻¹² mol dm⁻³ and pH = 12.00. For a diprotic strong base such as Ba(OH)₂, [OH⁻] is twice the base concentration. Remember that Kw changes with temperature, so use the value quoted for the stated temperature. A strong answer earns marks for these points. Uses Kw = [H⁺][OH⁻] with the value appropriate to the stated temperature. Sets [OH⁻] equal to the concentration of a monoprotic strong base because dissociation is complete. Doubles the base concentration to obtain [OH⁻] for a strong base that releases two hydroxide ions per formula unit. Rearranges to [H⁺] = Kw ÷ [OH⁻] and substitutes the correct concentrations. Exam tip: Write the dissociation equation first so the mole ratio of OH⁻ to base is explicit.

    Key words

    Say what each word means before you turn the card.

    Ionic product of water Kw

    Try answering aloud or in your head before turning the card.

    Strong base dissociation

    Try answering aloud or in your head before turning the card.

    Hydrogen ion concentration from hydroxide concentration

    Try answering aloud or in your head before turning the card.

    pH calculation

    Try answering aloud or in your head before turning the card.

    See every definition
    Ionic product of water Kw
    Equal to [H⁺][OH⁻], with a value of 1.00 × 10⁻¹⁴ mol² dm⁻⁶ at 298 K, and it changes with temperature.
    Strong base dissociation
    For a strong base such as NaOH or KOH, the hydroxide ion concentration equals the concentration of the base because each formula unit dissociates fully.
    Hydrogen ion concentration from hydroxide concentration
    Rearranging Kw gives [H⁺] = Kw ÷ [OH⁻], and for a diprotic strong base such as Ba(OH)₂, [OH⁻] is twice the base concentration.
    pH calculation
    pH = −log₁₀[H⁺], reported to an appropriate number of decimal places.

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Acids, bases and buffers: (ii) strong bases, using Kw

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge