OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    Acids, bases and buffers: pH and [H⁺(aq)]

    This topic links the hydrogen ion concentration of an aqueous solution to its pH through the logarithmic relationship pH = –log₁₀[H⁺(aq)].

    • Point 8 of 26
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    This topic links the hydrogen ion concentration of an aqueous solution to its pH through the logarithmic relationship pH = –log₁₀[H⁺(aq)]. Because the scale is logarithmic, a tenfold change in [H⁺(aq)] shifts pH by one unit: lowering [H⁺(aq)] from 1.0 × 10⁻² to 1.0 × 10⁻³ mol dm⁻³ raises pH from 2.00 to 3.00. Work in mol dm⁻³, take log₁₀ of the concentration, then apply the negative sign. For a solution with [H⁺(aq)] = 1.0 × 10⁻³ mol dm⁻³, log₁₀(1.0 × 10⁻³) = –3, so pH = –(–3) = 3.00. Reverse the process with [H⁺(aq)] = 10^(–pH). Recognise that acidic solutions have pH below 7 at 298 K and that a smaller [H⁺(aq)] gives a larger pH. Keep significant figures sensible: pH quoted to two decimal places corresponds to concentration to two significant figures.

    What earns the marks

    • Applies pH = –log₁₀[H⁺(aq)] to the stated hydrogen ion concentration and reports the correct value.
    • Converts between pH and [H⁺(aq)] using [H⁺(aq)] = 10^(–pH) in the reverse direction.
    • Explains that a tenfold decrease in [H⁺(aq)] raises pH by one unit because the scale is logarithmic.
    • Identifies that a lower [H⁺(aq)] corresponds to a higher pH and a less acidic solution.
    • Keeps units of mol dm⁻³ for concentration and treats pH as dimensionless.

    Common mistakes and how to put them right

    • Omits the negative sign in pH = –log₁₀[H⁺(aq)] and reports –3.00 for [H⁺(aq)] = 1.0 × 10⁻³ mol dm⁻³.

      Put it right: Apply the minus sign so the answer is 3.00.

    • Treats pH as directly proportional to [H⁺(aq)] and predicts a halving of concentration halves pH.

      Put it right: Recognise the logarithmic relationship instead.

    • Uses the natural logarithm rather than log₁₀ when converting.

      Put it right: Apply base-10 logarithms throughout.

    • Attaches units such as mol dm⁻³ to a pH value.

      Put it right: Report pH as a dimensionless number.

    Exam tips

    • Write the equation pH = –log₁₀[H⁺(aq)] before substituting so the sign is handled deliberately.
    • Check the answer is sensible: an acidic solution at 298 K should give pH below 7.
    • Quote pH to two decimal places when the concentration is given to two significant figures.
    • For reverse calculations, enter 10^(–pH) directly into the calculator to avoid sign slips.

    Try the lesson

    The start of the Acids, bases and buffers: pH and [H⁺(aq)] lesson, made from teaching notes for this specification point.

    Listen

    This topic links the hydrogen ion concentration of an aqueous solution to its pH through the logarithmic relationship pH = –log₁₀[H⁺(aq)]. Because the scale is logarithmic, a tenfold change in [H⁺(aq)] shifts pH by one unit: lowering [H⁺(aq)] from 1.0 × 10⁻² to 1.0 × 10⁻³ mol dm⁻³ raises pH from 2.00 to 3.00. Work in mol dm⁻³, take log₁₀ of the concentration, then apply the negative sign. For a solution with [H⁺(aq)] = 1.0 × 10⁻³ mol dm⁻³, log₁₀(1.0 × 10⁻³) = –3, so pH = –(–3) = 3.00. Reverse the process with [H⁺(aq)] = 10^(–pH). Recognise that acidic solutions have pH below 7 at 298 K and that a smaller [H⁺(aq)] gives a larger pH. Keep significant figures sensible: pH quoted to two decimal places corresponds to concentration to two significant figures. A strong answer earns marks for these points. Applies pH = –log₁₀[H⁺(aq)] to the stated hydrogen ion concentration and reports the correct value. Converts between pH and [H⁺(aq)] using [H⁺(aq)] = 10^(–pH) in the reverse direction. Explains that a tenfold decrease in [H⁺(aq)] raises pH by one unit because the scale is logarithmic. Identifies that a lower [H⁺(aq)] corresponds to a higher pH and a less acidic solution. Exam tip: Write the equation pH = –log₁₀[H⁺(aq)] before substituting so the sign is handled deliberately.

    See it

    A top-down flowchart. The first node, hydrogen ion concentration in mol dm⁻³, leads to taking log₁₀ of the concentration, which leads to applying the negative sign, which leads to the equation pH = –log₁₀[H⁺(aq)]. From that equation two branches emerge: one node stating pH is dimensionless, and one node giving the reverse conversion, hydrogen ion concentration = 10^(–pH). Separately, a node for a tenfold decrease in hydrogen ion concentration leads to a node saying pH rises by one unit, which leads to a node saying a lower hydrogen ion concentration gives a higher pH.
    The steps converting hydrogen ion concentration to pH, the reverse conversion, and the effect of a tenfold change in concentration on pH.

    Key words

    Say what each word means before you turn the card.

    Logarithmic pH scale

    Try answering aloud or in your head before turning the card.

    Relationship between [H⁺(aq)] and pH

    Try answering aloud or in your head before turning the card.

    Acid strength and hydrogen ion concentration

    Try answering aloud or in your head before turning the card.

    Significant figures and units in pH calculations

    Try answering aloud or in your head before turning the card.

    See every definition
    Logarithmic pH scale
    A scale linking [H⁺(aq)] to pH through pH = –log₁₀[H⁺(aq)], so a tenfold change in [H⁺(aq)] shifts pH by one unit.
    Relationship between [H⁺(aq)] and pH
    pH is found by taking log₁₀ of the concentration in mol dm⁻³ and applying the negative sign, and reversed with [H⁺(aq)] = 10^(–pH).
    Acid strength and hydrogen ion concentration
    A smaller [H⁺(aq)] gives a larger pH, and acidic solutions have pH below 7 at 298 K.
    Significant figures and units in pH calculations
    pH quoted to two decimal places corresponds to concentration to two significant figures, concentration is in mol dm⁻³ and pH is dimensionless.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart. The first node, hydrogen ion concentration in mol dm⁻³, leads to taking log₁₀ of the concentration, which leads to applying the negative sign, which leads to the equation pH = –log₁₀[H⁺(aq)]. From that equation two branches emerge: one node stating pH is dimensionless, and one node giving the reverse conversion, hydrogen ion concentration = 10^(–pH). Separately, a node for a tenfold decrease in hydrogen ion concentration leads to a node saying pH rises by one unit, which leads to a node saying a lower hydrogen ion concentration gives a higher pH.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Acids, bases and buffers: pH and [H⁺(aq)]

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge