OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (ii) acids with bases, including carbonates, metal oxides and alkalis…

    Full specification wording

    Acids: (ii) acids with bases, including carbonates, metal oxides and alkalis (water-soluble bases), to form salts, including full equations

    An acid reacts with a base to give a salt and, in most cases, water.

    • Point 4 of 7
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    An acid reacts with a base to give a salt and, in most cases, water. A base is a proton acceptor; an alkali is a base that dissolves in water, so all alkalis are bases but not all bases are alkalis. With a metal oxide such as copper(II) oxide, the acid is neutralised: 2HCl(aq) + CuO(s) → CuCl₂(aq) + H₂O(l). With an alkali such as sodium hydroxide, the ionic equation is H⁺(aq) + OH⁻(aq) → H₂O(l). With a carbonate such as calcium carbonate, the acid also releases carbon dioxide: 2HCl(aq) + CaCO₃(s) → CaCl₂(aq) + H₂O(l) + CO₂(g). Full equations must balance in atoms and charge, and the salt formula follows from the ions involved, for example Al³⁺ with SO₄²⁻ gives Al₂(SO₄)₃.

    What earns the marks

    • Balances every full equation in atoms and in charge, adjusting coefficients until both sides agree.
    • Identifies the salt formed from the metal or ammonium ion of the base and the anion of the acid.
    • Writes the ionic equation for neutralisation as H⁺(aq) + OH⁻(aq) → H₂O(l).
    • Includes carbon dioxide as a product when an acid reacts with a carbonate.
    • Distinguishes an alkali as a water-soluble base rather than a separate class of substance.
    • Applies the correct formula of a salt using the charges on the cation and anion, for example Al₂(SO₄)₃.

    Common mistakes and how to put them right

    • Omits water from the equation for an acid with a metal oxide.

      Put it right: Include H₂O(l) as a product of neutralisation.

    • Writes the salt formula without balancing ionic charges, giving an incorrect subscript.

      Put it right: Derive subscripts from the cation and anion charges.

    • Treats every base as an alkali.

      Put it right: State that an alkali is a base that dissolves in water.

    • Forgets carbon dioxide when an acid reacts with a carbonate.

      Put it right: Add CO₂(g) to the products.

    Exam tips

    • Check the state symbols and balance the equation atom by atom before selecting an answer.
    • Recall that acid plus carbonate always gives salt, water and carbon dioxide.
    • Use ion charges to build the salt formula, then verify the full equation balances.
    • Read the question carefully to see whether a full equation or an ionic equation is required.

    Try the lesson

    The start of the Acids: (ii) acids with bases, including carbonates, metal oxides and alkalis (water-soluble bases), to form salts, including full equations lesson, made from teaching notes for this specification point.

    Listen

    An acid reacts with a base to give a salt and, in most cases, water. A base is a proton acceptor; an alkali is a base that dissolves in water, so all alkalis are bases but not all bases are alkalis. With a metal oxide such as copper(II) oxide, the acid is neutralised: 2HCl(aq) + CuO(s) → CuCl₂(aq) + H₂O(l). With an alkali such as sodium hydroxide, the ionic equation is H⁺(aq) + OH⁻(aq) → H₂O(l). With a carbonate such as calcium carbonate, the acid also releases carbon dioxide: 2HCl(aq) + CaCO₃(s) → CaCl₂(aq) + H₂O(l) + CO₂(g). Full equations must balance in atoms and charge, and the salt formula follows from the ions involved, for example Al³⁺ with SO₄²⁻ gives Al₂(SO₄)₃. A strong answer earns marks for these points. Balances every full equation in atoms and in charge, adjusting coefficients until both sides agree. Identifies the salt formed from the metal or ammonium ion of the base and the anion of the acid. Writes the ionic equation for neutralisation as H⁺(aq) + OH⁻(aq) → H₂O(l). Includes carbon dioxide as a product when an acid reacts with a carbonate. Exam tip: Check the state symbols and balance the equation atom by atom before selecting an answer.

    See it

    A top-down flowchart. The top node reads 'Acid + base' and branches to three nodes: 'Salt formed', 'Water, in most cases', and 'Type of base'. The 'Type of base' node branches to three further nodes: 'Metal oxide', 'Alkali: water-soluble base', and 'Carbonate'. 'Metal oxide' leads to 'Salt + water'. 'Alkali: water-soluble base' leads to 'Salt + water; ionic equation H⁺(aq) + OH⁻(aq) → H₂O(l)'. 'Carbonate' leads to 'Salt + water + CO₂(g)'.
    Shows that an acid reacting with a base gives a salt and, in most cases, water, and how the products differ for a metal oxide, an alkali and a carbonate.

    Key words

    Say what each word means before you turn the card.

    Neutralisation of acids by bases

    Try answering aloud or in your head before turning the card.

    Salt formation from cation and anion

    Try answering aloud or in your head before turning the card.

    Alkalis as water-soluble bases

    Try answering aloud or in your head before turning the card.

    Carbonate reactions releasing carbon dioxide

    Try answering aloud or in your head before turning the card.

    See every definition
    Neutralisation of acids by bases
    An acid reacts with a base to give a salt and, in most cases, water.
    Salt formation from cation and anion
    The salt formula follows from the ions involved, using the charges on the cation and anion.
    Alkalis as water-soluble bases
    An alkali is a base that dissolves in water, so all alkalis are bases but not all bases are alkalis.
    Carbonate reactions releasing carbon dioxide
    With a carbonate such as calcium carbonate, the acid also releases carbon dioxide.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart. The top node reads 'Acid + base' and branches to three nodes: 'Salt formed', 'Water, in most cases', and 'Type of base'. The 'Type of base' node branches to three further nodes: 'Metal oxide', 'Alkali: water-soluble base', and 'Carbonate'. 'Metal oxide' leads to 'Salt + water'. 'Alkali: water-soluble base' leads to 'Salt + water; ionic equation H⁺(aq) + OH⁻(aq) → H₂O(l)'. 'Carbonate' leads to 'Salt + water + CO₂(g)'.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Acids: (ii) acids with bases, including carbonates, metal oxides and alkalis (water-soluble bases), to form salts, including full equations

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge