OCR · A-Level · Chemistry
Course version: H432 · Version from Sept 2017
• use of a separating funnel to remove an organic layer from an aqueous…
Full specification wording
Alcohols, haloalkanes and analysis - 4.2.3 Organic synthesis: • use of a separating funnel to remove an organic layer from an aqueous layer
A separating funnel exploits the immiscibility of an organic liquid and water so the two layers can be drawn off separately.
- Point 3 of 9
- 4 key terms
Study notes
From the teaching notes for this specification point.
The idea
A separating funnel exploits the immiscibility of an organic liquid and water so the two layers can be drawn off separately. After the reaction mixture is cooled and poured into the funnel, the layers settle: the denser layer collects at the bottom and the less dense layer floats above. The stopper is removed or the tap opened carefully, and the lower layer is run out through the tap into a clean vessel while the upper layer remains. You identify which layer is organic from density data or by adding a little water and seeing which layer grows. The MCQ tests the practical reasoning: why the stopper is removed, which layer is run off first, and how repeated extraction with fresh solvent improves recovery.
What earns the marks
- Explains that the separating funnel works because the organic and aqueous layers are immiscible and settle by density.
- States that the lower layer is run out through the tap first while the upper layer is retained.
- Identifies that the stopper is removed or the tap opened to let air in and allow smooth flow.
- Describes shaking with a venting step to relieve pressure from volatile solvents.
- Recognises that the organic layer can be identified by density data or by adding water to see which layer increases.
Common mistakes and how to put them right
Leaves the stopper firmly in place while running off liquid.
Put it right: Remove the stopper so pressure does not stop the flow.
Assumes the organic layer is always on top.
Put it right: Check densities, since halogenated organic liquids can be denser than water.
Shakes the funnel without venting.
Put it right: Open the tap periodically to release built-up pressure.
Discards the wrong layer without checking which is organic.
Put it right: Confirm identity before disposing of either layer.
Exam tips
- Use density information in the stem to decide which layer is organic before answering.
- Remember the practical rule that the lower layer leaves through the tap first.
- Link venting during shaking to the volatility of organic solvents and pressure build-up.
- Reject options that keep the stopper sealed or that assume the organic layer is always uppermost.
Try the lesson
The start of the Alcohols, haloalkanes and analysis - 4.2.3 Organic synthesis: • use of a separating funnel to remove an organic layer from an aqueous layer lesson, made from teaching notes for this specification point.
Listen
A separating funnel exploits the immiscibility of an organic liquid and water so the two layers can be drawn off separately. After the reaction mixture is cooled and poured into the funnel, the layers settle: the denser layer collects at the bottom and the less dense layer floats above. The stopper is removed or the tap opened carefully, and the lower layer is run out through the tap into a clean vessel while the upper layer remains. You identify which layer is organic from density data or by adding a little water and seeing which layer grows. The MCQ tests the practical reasoning: why the stopper is removed, which layer is run off first, and how repeated extraction with fresh solvent improves recovery. A strong answer earns marks for these points. Explains that the separating funnel works because the organic and aqueous layers are immiscible and settle by density. States that the lower layer is run out through the tap first while the upper layer is retained. Identifies that the stopper is removed or the tap opened to let air in and allow smooth flow. Describes shaking with a venting step to relieve pressure from volatile solvents. Exam tip: Use density information in the stem to decide which layer is organic before answering.
Key words
Say what each word means before you turn the card.
Immiscibility of organic and aqueous layers
Try answering aloud or in your head before turning the card.
Density and layer order
Try answering aloud or in your head before turning the card.
Safe use of the separating funnel
Try answering aloud or in your head before turning the card.
Identifying the organic layer
Try answering aloud or in your head before turning the card.
See every definition
- Immiscibility of organic and aqueous layers
- The organic liquid and water do not mix, so they settle into two separate layers that can be drawn off separately.
- Density and layer order
- The denser layer collects at the bottom and the less dense layer floats above, so the lower layer is run out through the tap first while the upper layer remains.
- Safe use of the separating funnel
- The stopper is removed or the tap opened carefully to let air in and allow smooth flow, and shaking includes a venting step to relieve pressure from volatile solvents.
- Identifying the organic layer
- Which layer is organic is identified from density data or by adding a little water and seeing which layer grows.
There is more to this lesson
The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge
Test your understanding of Alcohols, haloalkanes and analysis - 4.2.3 Organic synthesis: • use of a separating funnel to remove an organic layer from an aqueous layer
Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge