OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (iii) use of average bond enthalpies to calculate enthalpy changes and…

    Full specification wording

    Enthalpy changes: (iii) use of average bond enthalpies to calculate enthalpy changes and related quantities (see also 2.2.2 f)

    Average bond enthalpies are mean values for a particular bond type across a range of compounds, usually quoted in kJ mol⁻¹ for gaseous species.

    • Point 14 of 20
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Average bond enthalpies are mean values for a particular bond type across a range of compounds, usually quoted in kJ mol⁻¹ for gaseous species. To calculate the enthalpy change of a reaction, sum the average bond enthalpies of all bonds broken in the reactants and subtract the sum of the average bond enthalpies of all bonds made in the products: ΔH = Σ(bonds broken) − Σ(bonds made). A positive result indicates an endothermic reaction; a negative result indicates an exothermic reaction. Because the values are averages, the calculated ΔH is an estimate and may differ from a measured value. Related quantities can be found by rearranging the same relationship, for example to find the total energy of bonds broken or made.

    What earns the marks

    • Identifies the bonds broken in the reactants and the bonds made in the products from a displayed equation.
    • Sums the average bond enthalpies of all bonds broken and all bonds made.
    • Applies ΔH = Σ(bonds broken) − Σ(bonds made) with correct arithmetic.
    • Interprets a positive or negative result as endothermic or exothermic respectively.
    • Recognises that average bond enthalpies give an estimated value because they are mean values.
    • Rearranges the relationship to find a related quantity such as total energy of bonds broken or made.

    Common mistakes and how to put them right

    • Adds bonds made to bonds broken instead of subtracting.

      Put it right: Use ΔH = Σ(bonds broken) − Σ(bonds made).

    • Uses bond enthalpies for bonds that are not broken or made in the equation.

      Put it right: Identify only the bonds that change.

    • Forgets to multiply each bond enthalpy by the number of that bond in the equation.

      Put it right: Count every bond carefully.

    • Treats the calculated value as exact.

      Put it right: State that average bond enthalpies give an estimate.

    Exam tips

    • Write out the bonds broken and bonds made separately before doing any arithmetic.
    • Multiply each average bond enthalpy by the number of that bond type shown in the balanced equation.
    • Check the sign of your answer against whether the reaction is exothermic or endothermic.
    • Keep units as kJ mol⁻¹ throughout and state them in your answer.

    Try the lesson

    The start of the Enthalpy changes: (iii) use of average bond enthalpies to calculate enthalpy changes and related quantities (see also 2.2.2 f) lesson, made from teaching notes for this specification point.

    Listen

    Average bond enthalpies are mean values for a particular bond type across a range of compounds, usually quoted in kJ mol⁻¹ for gaseous species. To calculate the enthalpy change of a reaction, sum the average bond enthalpies of all bonds broken in the reactants and subtract the sum of the average bond enthalpies of all bonds made in the products: ΔH = Σ(bonds broken) − Σ(bonds made). A positive result indicates an endothermic reaction; a negative result indicates an exothermic reaction. Because the values are averages, the calculated ΔH is an estimate and may differ from a measured value. Related quantities can be found by rearranging the same relationship, for example to find the total energy of bonds broken or made. A strong answer earns marks for these points. Identifies the bonds broken in the reactants and the bonds made in the products from a displayed equation. Sums the average bond enthalpies of all bonds broken and all bonds made. Applies ΔH = Σ(bonds broken) − Σ(bonds made) with correct arithmetic. Interprets a positive or negative result as endothermic or exothermic respectively. Exam tip: Write out the bonds broken and bonds made separately before doing any arithmetic.

    See it

    A top-down flowchart with eight nodes. The first node says identify bonds broken in reactants and points to a second node, identify bonds made in products. That points to a third node, sum average bond enthalpies of bonds broken, which points to a fourth node, sum average bond enthalpies of bonds made. The fourth points to a fifth node, apply delta H equals sum of bonds broken minus sum of bonds made. The fifth node branches to three outcomes: a positive result is endothermic, a negative result is exothermic, and the value is an estimate because average bond enthalpies are mean values.
    The sequence for calculating an enthalpy change from average bond enthalpies, from identifying bonds broken and made through to interpreting the sign and recognising the value is an estimate.

    Key words

    Say what each word means before you turn the card.

    Average bond enthalpies

    Try answering aloud or in your head before turning the card.

    Calculating enthalpy changes

    Try answering aloud or in your head before turning the card.

    Bond breaking and bond making

    Try answering aloud or in your head before turning the card.

    Estimates from mean values

    Try answering aloud or in your head before turning the card.

    See every definition
    Average bond enthalpies
    Mean values for a particular bond type across a range of compounds, usually quoted in kJ mol⁻¹ for gaseous species.
    Calculating enthalpy changes
    Summing the average bond enthalpies of all bonds broken in the reactants and subtracting the sum of the average bond enthalpies of all bonds made in the products.
    Bond breaking and bond making
    Bonds broken in the reactants and bonds made in the products are summed separately, and the relationship ΔH = Σ(bonds broken) − Σ(bonds made) is applied.
    Estimates from mean values
    Because the values are averages, the calculated ΔH is an estimate and may differ from a measured value.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart with eight nodes. The first node says identify bonds broken in reactants and points to a second node, identify bonds made in products. That points to a third node, sum average bond enthalpies of bonds broken, which points to a fourth node, sum average bond enthalpies of bonds made. The fourth points to a fifth node, apply delta H equals sum of bonds broken minus sum of bonds made. The fifth node branches to three outcomes: a positive result is endothermic, a negative result is exothermic, and the value is an estimate because average bond enthalpies are mean values.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Enthalpy changes: (iii) use of average bond enthalpies to calculate enthalpy changes and related quantities (see also 2.2.2 f)

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge