OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (i) enthalpy change of solution (dissolving of 1 mol of solute, ∆solH)

    Full specification wording

    Lattice enthalpy: (i) enthalpy change of solution (dissolving of 1 mol of solute, ∆solH)

    Here you must explain and use enthalpy change of solution, defined as the enthalpy change when one mole of a solute dissolves in a solvent, written ∆solH.

    • Point 6 of 9
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Here you must explain and use enthalpy change of solution, defined as the enthalpy change when one mole of a solute dissolves in a solvent, written ∆solH. The key features are the amount (one mole of solute), the process (dissolving, not reacting) and the direction of the change. In a Born–Haber style cycle you break the ionic lattice into gaseous ions (endothermic, the reverse of lattice enthalpy) and then hydrate those ions (exothermic), and the sum gives ∆solH. For an ionic solid such as sodium chloride, ∆solH is the net result of these two steps, so it can be positive or negative depending on which term dominates. Use the term only for the dissolving step and keep it distinct from hydration enthalpy, which applies to one mole of gaseous ions.

    What earns the marks

    • Defines enthalpy change of solution as the enthalpy change when one mole of a solute dissolves in a solvent.
    • Uses the symbol ∆solH correctly for the dissolving process.
    • Combines the reverse of lattice enthalpy with enthalpies of hydration to obtain ∆solH in a cycle.
    • Keeps enthalpy change of solution distinct from enthalpy change of hydration by naming the species involved.

    Common mistakes and how to put them right

    • Defines the term for one mole of ions rather than one mole of solute.

      Put it right: State that one mole of solute dissolves.

    • Confuses ∆solH with hydration enthalpy.

      Put it right: Separate them by naming gaseous ions for hydration and the solid solute for solution.

    • Adds the lattice enthalpy in the wrong direction.

      Put it right: Use the reverse (endothermic) step when building the cycle.

    Exam tips

    • Write the definition as a word equation: one mole of solute plus solvent gives the solution.
    • Label each arrow in the cycle with its term and sign before summing to find ∆solH.
    • Check that the species at the start and end of your cycle match the definition of dissolving.

    Try the lesson

    The start of the Lattice enthalpy: (i) enthalpy change of solution (dissolving of 1 mol of solute, ∆solH) lesson, made from teaching notes for this specification point.

    Listen

    Here you must explain and use enthalpy change of solution, defined as the enthalpy change when one mole of a solute dissolves in a solvent, written ∆solH. The key features are the amount (one mole of solute), the process (dissolving, not reacting) and the direction of the change. In a Born–Haber style cycle you break the ionic lattice into gaseous ions (endothermic, the reverse of lattice enthalpy) and then hydrate those ions (exothermic), and the sum gives ∆solH. For an ionic solid such as sodium chloride, ∆solH is the net result of these two steps, so it can be positive or negative depending on which term dominates. Use the term only for the dissolving step and keep it distinct from hydration enthalpy, which applies to one mole of gaseous ions. A strong answer earns marks for these points. Defines enthalpy change of solution as the enthalpy change when one mole of a solute dissolves in a solvent. Uses the symbol ∆solH correctly for the dissolving process. Combines the reverse of lattice enthalpy with enthalpies of hydration to obtain ∆solH in a cycle. Keeps enthalpy change of solution distinct from enthalpy change of hydration by naming the species involved. Exam tip: Write the definition as a word equation: one mole of solute plus solvent gives the solution.

    See it

    A flowchart running from top to bottom. The top node reads 'One mole of solid solute'. An arrow labelled 'Reverse of lattice enthalpy (endothermic)' leads down to a node reading 'Gaseous ions'. From there an arrow labelled 'Enthalpies of hydration (exothermic)' leads down to a node reading 'Solution'. A separate arrow labelled '∆solH' runs directly from the top node 'One mole of solid solute' to the bottom node 'Solution', showing that the enthalpy change of solution is the net result of the two steps.
    A Born–Haber style cycle showing that ∆solH is the net result of breaking the ionic lattice into gaseous ions (endothermic) and hydrating those ions (exothermic).

    Key words

    Say what each word means before you turn the card.

    Enthalpy change of solution

    Try answering aloud or in your head before turning the card.

    ∆solH in energy cycles

    Try answering aloud or in your head before turning the card.

    Relationship with lattice and hydration enthalpies

    Try answering aloud or in your head before turning the card.

    Enthalpy change of hydration

    Try answering aloud or in your head before turning the card.

    See every definition
    Enthalpy change of solution
    The enthalpy change when one mole of a solute dissolves in a solvent, written ∆solH.
    ∆solH in energy cycles
    Obtained by combining the reverse of lattice enthalpy with enthalpies of hydration in a cycle.
    Relationship with lattice and hydration enthalpies
    The net result of breaking the ionic lattice into gaseous ions and then hydrating those ions, so it can be positive or negative depending on which term dominates.
    Enthalpy change of hydration
    Applies to one mole of gaseous ions and must be kept distinct from the dissolving step.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 2 boxes numbered instead of named. A flowchart running from top to bottom. The top node reads 'One mole of solid solute'. An arrow labelled 'Reverse of lattice enthalpy (endothermic)' leads down to a node reading 'Gaseous ions'. From there an arrow labelled 'Enthalpies of hydration (exothermic)' leads down to a node reading 'Solution'. A separate arrow labelled '∆solH' runs directly from the top node 'One mole of solid solute' to the bottom node 'Solution', showing that the enthalpy change of solution is the net result of the two steps.
    • 1Box 1

    • 2Box 2

    0 of 2 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Lattice enthalpy: (i) enthalpy change of solution (dissolving of 1 mol of solute, ∆solH)

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge