OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (a) the techniques and procedures used for the preparation and…

    Full specification wording

    Nitrogen compounds, polymers and synthesis - 6.2.5 Organic synthesis: (a) the techniques and procedures used for the preparation and purification of organic solids involving use of a range of techniques (see also 4.2.3 a) including:

    Preparation typically involves heating under reflux to complete the reaction, then cooling and filtering the solid.

    • Point 1 of 11
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Preparation typically involves heating under reflux to complete the reaction, then cooling and filtering the solid. Purification commonly uses recrystallisation: dissolve the crude solid in the minimum of hot solvent, cool slowly to form crystals, filter under reduced pressure and wash with cold solvent, then dry. Choosing a suitable solvent matters because the solid should be soluble when hot but only sparingly soluble when cold. Each step has a purpose, such as removing soluble impurities or maximising crystal yield, and links to the techniques in 4.2.3 a.

    What earns the marks

    • Identifies heating under reflux as a technique used to complete the preparation reaction before isolating the solid.
    • Explains that recrystallisation dissolves the crude solid in the minimum of hot solvent and then cools it slowly to form purified crystals.
    • States that filtration under reduced pressure separates the crystals from the mother liquor and that washing with cold solvent removes soluble impurities.
    • Describes drying the purified solid, for example in a warm oven or desiccator, as the final purification step.
    • Explains that a suitable recrystallisation solvent dissolves the solid when hot but only sparingly when cold, so crystals form on cooling.
    • Links the preparation and purification techniques to the methods described in 4.2.3 a.

    Common mistakes and how to put them right

    • Uses a large excess of hot solvent.

      Put it right: Use the minimum volume so the solution is saturated and crystals form readily on cooling.

    • Cools the hot solution quickly or without care.

      Put it right: Cool slowly so pure crystals form and impurities stay in solution.

    • Washes the crystals with warm solvent.

      Put it right: Wash with cold solvent to avoid redissolving the purified solid.

    Exam tips

    • For each technique, state both what is done and why, since questions often ask for the purpose of a step.
    • Remember the cross-reference to 4.2.3 a and revise the linked purification techniques alongside those in 6.2.5.
    • When describing recrystallisation, give the sequence in order: dissolve in minimum hot solvent, cool slowly, filter under reduced pressure, wash with cold solvent, dry.

    Try the lesson

    The start of the Nitrogen compounds, polymers and synthesis - 6.2.5 Organic synthesis: (a) the techniques and procedures used for the preparation and purification of organic solids involving use of a range of techniques (see also 4.2.3 a) including: lesson, made from teaching notes for this specification point.

    Listen

    Preparation typically involves heating under reflux to complete the reaction, then cooling and filtering the solid. Purification commonly uses recrystallisation: dissolve the crude solid in the minimum of hot solvent, cool slowly to form crystals, filter under reduced pressure and wash with cold solvent, then dry. Choosing a suitable solvent matters because the solid should be soluble when hot but only sparingly soluble when cold. Each step has a purpose, such as removing soluble impurities or maximising crystal yield, and links to the techniques in 4.2.3 a. A strong answer earns marks for these points. Identifies heating under reflux as a technique used to complete the preparation reaction before isolating the solid. Explains that recrystallisation dissolves the crude solid in the minimum of hot solvent and then cools it slowly to form purified crystals. States that filtration under reduced pressure separates the crystals from the mother liquor and that washing with cold solvent removes soluble impurities. Describes drying the purified solid, for example in a warm oven or desiccator, as the final purification step. A common slip: Uses a large excess of hot solvent. Instead, use the minimum volume so the solution is saturated and crystals form readily on cooling. Exam tip: For each technique, state both what is done and why, since questions often ask for the purpose of a step.

    See it

    A top-to-bottom flowchart with seven steps. First, heat under reflux to complete the reaction. Second, cool and filter to isolate the crude solid. Third, dissolve the crude solid in the minimum of hot solvent. Fourth, cool slowly to form crystals. Fifth, filter under reduced pressure. Sixth, wash with cold solvent. Seventh, dry the purified solid.
    It shows the sequence of steps for preparing an organic solid by heating under reflux and then purifying it by recrystallisation, filtration, washing and drying.

    Put it in order

    Put these steps in the order they happen.

    1. 1. Dry the purified solid
    2. 2. Wash with cold solvent
    3. 3. Dissolve crude solid in minimum of hot solvent
    4. 4. Filter under reduced pressure
    5. 5. Heat under reflux to complete the reaction
    6. 6. Cool and filter to isolate the crude solid
    7. 7. Cool slowly to form crystals

    Key words

    Say what each word means before you turn the card.

    Heating under reflux

    Try answering aloud or in your head before turning the card.

    Recrystallisation

    Try answering aloud or in your head before turning the card.

    Filtration under reduced pressure

    Try answering aloud or in your head before turning the card.

    Suitable recrystallisation solvent

    Try answering aloud or in your head before turning the card.

    See every definition
    Heating under reflux
    A technique used to complete the preparation reaction before isolating the solid.
    Recrystallisation
    Dissolves the crude solid in the minimum of hot solvent and then cools it slowly to form purified crystals.
    Filtration under reduced pressure
    Separates the crystals from the mother liquor, and washing with cold solvent removes soluble impurities.
    Suitable recrystallisation solvent
    Dissolves the solid when hot but only sparingly when cold, so crystals form on cooling.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-to-bottom flowchart with seven steps. First, heat under reflux to complete the reaction. Second, cool and filter to isolate the crude solid. Third, dissolve the crude solid in the minimum of hot solvent. Fourth, cool slowly to form crystals. Fifth, filter under reduced pressure. Sixth, wash with cold solvent. Seventh, dry the purified solid.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Nitrogen compounds, polymers and synthesis - 6.2.5 Organic synthesis: (a) the techniques and procedures used for the preparation and purification of organic solids involving use of a range of techniques (see also 4.2.3 a) including:

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge