OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    Polyesters and polyamides: (iii) the type of polymerisation.

    When you identify the type of polymerisation that forms a polyester or a polyamide, decide between condensation and addition by looking at what happens to the monomers.

    • Point 11 of 11
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    When you identify the type of polymerisation that forms a polyester or a polyamide, decide between condensation and addition by looking at what happens to the monomers. In condensation polymerisation two different monomers, each with two functional groups, join repeatedly and a small molecule such as water or hydrogen chloride is eliminated at every linkage. A diol plus a dicarboxylic acid gives a polyester with ester links; a diamine plus a dicarboxylic acid gives a polyamide with amide links. In addition polymerisation an alkene monomer with a C=C double bond opens that bond and adds to the growing chain with no small molecule lost. So the presence of two functional groups per monomer and the loss of a small molecule each time identify condensation; an unsaturated monomer adding with nothing eliminated identifies addition.

    What earns the marks

    • Identifies condensation polymerisation as the route that eliminates a small molecule such as water at each new linkage.
    • Identifies addition polymerisation as the route in which an alkene C=C bond opens and adds with no small molecule eliminated.
    • Links a polyester to condensation of a diol with a dicarboxylic acid and a polyamide to condensation of a diamine with a dicarboxylic acid.
    • Distinguishes the two routes by the number of functional groups per monomer and by whether a small molecule is lost.

    Common mistakes and how to put them right

    • Calls a polyester an addition polymer because it contains many ester groups.

      Put it right: Recognise that the ester links form by condensation with loss of water.

    • Assumes any polymer made from two monomers must be addition.

      Put it right: Check instead whether a small molecule is eliminated at each linkage.

    • Treats the C=C double bond of an unsaturated monomer as evidence of condensation.

      Put it right: Recognise that an opening double bond with nothing eliminated signals addition.

    Exam tips

    • Read the monomer structures first and count the functional groups on each before choosing a type.
    • Look for a small molecule such as water or hydrogen chloride being eliminated as the decisive clue for condensation.
    • State the linkage formed, ester or amide, to justify your choice of condensation rather than addition.

    Try the lesson

    The start of the Polyesters and polyamides: (iii) the type of polymerisation. lesson, made from teaching notes for this specification point.

    Listen

    When you identify the type of polymerisation that forms a polyester or a polyamide, decide between condensation and addition by looking at what happens to the monomers. In condensation polymerisation two different monomers, each with two functional groups, join repeatedly and a small molecule such as water or hydrogen chloride is eliminated at every linkage. A diol plus a dicarboxylic acid gives a polyester with ester links; a diamine plus a dicarboxylic acid gives a polyamide with amide links. In addition polymerisation an alkene monomer with a C=C double bond opens that bond and adds to the growing chain with no small molecule lost. So the presence of two functional groups per monomer and the loss of a small molecule each time identify condensation; an unsaturated monomer adding with nothing eliminated identifies addition. A strong answer earns marks for these points. Identifies condensation polymerisation as the route that eliminates a small molecule such as water at each new linkage. Identifies addition polymerisation as the route in which an alkene C=C bond opens and adds with no small molecule eliminated. Links a polyester to condensation of a diol with a dicarboxylic acid and a polyamide to condensation of a diamine with a dicarboxylic acid. Distinguishes the two routes by the number of functional groups per monomer and by whether a small molecule is lost. Exam tip: Read the monomer structures first and count the functional groups on each before choosing a type.

    See it

    A flowchart starting from 'Look at the monomers' leading to the question 'Two functional groups per monomer?'. The Yes branch goes to 'Small molecule eliminated at each linkage', then to 'Condensation polymerisation', which splits into two outcomes: 'Diol + dicarboxylic acid gives polyester with ester links' and 'Diamine + dicarboxylic acid gives polyamide with amide links'. The No branch goes to 'Alkene C=C bond opens and adds', then to 'No small molecule eliminated', then to 'Addition polymerisation'.
    A decision flow showing how to classify a polymer as condensation or addition from its monomers and whether a small molecule is eliminated.

    Key words

    Say what each word means before you turn the card.

    Condensation polymerisation

    Try answering aloud or in your head before turning the card.

    Addition polymerisation

    Try answering aloud or in your head before turning the card.

    Ester and amide linkages

    Try answering aloud or in your head before turning the card.

    Diol and dicarboxylic acid monomers

    Try answering aloud or in your head before turning the card.

    See every definition
    Condensation polymerisation
    Two different monomers, each with two functional groups, join repeatedly and a small molecule such as water or hydrogen chloride is eliminated at every linkage.
    Addition polymerisation
    An alkene monomer with a C=C double bond opens that bond and adds to the growing chain with no small molecule lost.
    Ester and amide linkages
    A diol plus a dicarboxylic acid gives a polyester with ester links, while a diamine plus a dicarboxylic acid gives a polyamide with amide links.
    Diol and dicarboxylic acid monomers
    These two monomers join by condensation to give a polyester with ester links.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A flowchart starting from 'Look at the monomers' leading to the question 'Two functional groups per monomer?'. The Yes branch goes to 'Small molecule eliminated at each linkage', then to 'Condensation polymerisation', which splits into two outcomes: 'Diol + dicarboxylic acid gives polyester with ester links' and 'Diamine + dicarboxylic acid gives polyamide with amide links'. The No branch goes to 'Alkene C=C bond opens and adds', then to 'No small molecule eliminated', then to 'Addition polymerisation'.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Polyesters and polyamides: (iii) the type of polymerisation.

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge