OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (ii) the monomer(s) required for a given section of a polymer molecule

    Full specification wording

    Polyesters and polyamides: (ii) the monomer(s) required for a given section of a polymer molecule

    Working backwards from a polymer section means locating the repeating link and splitting the chain there.

    • Point 10 of 11
    • 3 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Working backwards from a polymer section means locating the repeating link and splitting the chain there. In a polyester, find each –COO– ester group: the carbonyl carbon and its oxygen come from the dicarboxylic acid, and the oxygen on the other side comes from the diol. Break the C–O single bond of the ester link, add –OH to the carbonyl side to rebuild the acid and add –H to the other side to rebuild the diol. In a polyamide, find each –CONH– amide link: the carbonyl side rebuilds the dicarboxylic acid and the nitrogen side rebuilds the diamine, again adding –OH and –H respectively. Repeat for every link in the section so each monomer is identified, and check that the two monomers together account for all the atoms shown.

    What earns the marks

    • Locates each ester or amide link in the given polymer section before splitting the chain.
    • Breaks the link between the carbonyl carbon and the adjacent oxygen or nitrogen to separate the residues.
    • Adds –OH to the carbonyl side to rebuild the dicarboxylic acid monomer.
    • Adds –H to the oxygen or nitrogen side to rebuild the diol or diamine monomer.
    • Identifies both monomers needed and checks that together they account for the atoms in the section.

    Common mistakes and how to put them right

    • Splits the chain at a carbon–carbon bond instead of at the ester or amide link.

      Put it right: Break the C–O or C–N bond of the link.

    • Adds –H to the carbonyl side and –OH to the other side.

      Put it right: Reverse this so the acid regains its –OH and the diol or diamine regains its –H.

    • Identifies only one monomer from the section.

      Put it right: Locate every link and name both the acid and the diol or diamine.

    • Leaves the rebuilt monomers with extra or missing atoms.

      Put it right: Check each against the atoms in the section.

    Exam tips

    • Mark every ester or amide link in the section first, then work through them one at a time.
    • Write the two monomers side by side and confirm that joining them reproduces the section shown.
    • Check the functional groups on your rebuilt monomers: two –COOH groups for the acid and two –OH or –NH₂ groups for the diol or diamine.

    Try the lesson

    The start of the Polyesters and polyamides: (ii) the monomer(s) required for a given section of a polymer molecule lesson, made from teaching notes for this specification point.

    Listen

    Working backwards from a polymer section means locating the repeating link and splitting the chain there. In a polyester, find each –COO– ester group: the carbonyl carbon and its oxygen come from the dicarboxylic acid, and the oxygen on the other side comes from the diol. Break the C–O single bond of the ester link, add –OH to the carbonyl side to rebuild the acid and add –H to the other side to rebuild the diol. In a polyamide, find each –CONH– amide link: the carbonyl side rebuilds the dicarboxylic acid and the nitrogen side rebuilds the diamine, again adding –OH and –H respectively. Repeat for every link in the section so each monomer is identified, and check that the two monomers together account for all the atoms shown. A strong answer earns marks for these points. Locates each ester or amide link in the given polymer section before splitting the chain. Breaks the link between the carbonyl carbon and the adjacent oxygen or nitrogen to separate the residues. Adds –OH to the carbonyl side to rebuild the dicarboxylic acid monomer. Adds –H to the oxygen or nitrogen side to rebuild the diol or diamine monomer. Exam tip: Mark every ester or amide link in the section first, then work through them one at a time.

    See it

    A top-down flowchart with eight nodes. It starts at the given polymer section, then goes to locating each ester or amide link, then to breaking the C–O or C–N bond of the link. From there it branches: the carbonyl side has –OH added to rebuild the dicarboxylic acid monomer, and the oxygen or nitrogen side has –H added to rebuild the diol or diamine monomer. Both branches lead to a final check that the two monomers account for all the atoms.
    It shows the steps for working backwards from a polymer section to its monomers by splitting each ester or amide link and rebuilding the acid and the diol or diamine.

    Key words

    Say what each word means before you turn the card.

    Ester and amide link recognition

    Try answering aloud or in your head before turning the card.

    Dicarboxylic acid and diol or diamine monomers

    Try answering aloud or in your head before turning the card.

    Atom accounting in polymer sections

    Try answering aloud or in your head before turning the card.

    See every definition
    Ester and amide link recognition
    Locating each –COO– ester group in a polyester or each –CONH– amide link in a polyamide before splitting the chain there.
    Dicarboxylic acid and diol or diamine monomers
    The carbonyl side rebuilds the dicarboxylic acid and the oxygen or nitrogen side rebuilds the diol or diamine, adding –OH and –H respectively.
    Atom accounting in polymer sections
    Checking that the two monomers together account for all the atoms shown in the given polymer section.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart with eight nodes. It starts at the given polymer section, then goes to locating each ester or amide link, then to breaking the C–O or C–N bond of the link. From there it branches: the carbonyl side has –OH added to rebuild the dicarboxylic acid monomer, and the oxygen or nitrogen side has –H added to rebuild the diol or diamine monomer. Both branches lead to a final check that the two monomers account for all the atoms.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Polyesters and polyamides: (ii) the monomer(s) required for a given section of a polymer molecule

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge