OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    Spectroscopy: (iii) IR spectra (see also 4.2.4 d–e)

    Infrared spectroscopy identifies bonds by the frequencies at which they absorb IR radiation, because each bond vibrates at characteristic wavenumbers measured in cm⁻¹.

    • Point 15 of 16
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Infrared spectroscopy identifies bonds by the frequencies at which they absorb IR radiation, because each bond vibrates at characteristic wavenumbers measured in cm⁻¹. You read an IR spectrum by matching absorption peaks to functional groups: a broad O–H absorption around 2500–3300 cm⁻¹ indicates a carboxylic acid, a broad O–H around 3200–3600 cm⁻¹ indicates an alcohol, a sharp C=O around 1680–1750 cm⁻¹ indicates a carbonyl, and C–H stretches appear just below 3000 cm⁻¹. The fingerprint region below about 1500 cm⁻¹ gives a pattern useful for identifying a specific compound by comparison with a database. This builds on 4.2.4 d–e, where you met the IR spectrometer and the idea of absorption by bonds, so apply that instrumental background to assign peaks and to distinguish, for example, an alcohol from a carboxylic acid.

    What earns the marks

    • Matches a broad absorption around 2500–3300 cm⁻¹ to the O–H bond of a carboxylic acid.
    • Matches a broad absorption around 3200–3600 cm⁻¹ to the O–H bond of an alcohol.
    • Matches a sharp absorption around 1680–1750 cm⁻¹ to a C=O carbonyl group.
    • Uses the fingerprint region below about 1500 cm⁻¹ to identify a compound by comparison with a database.
    • Explains that bonds absorb IR radiation at characteristic wavenumbers because they vibrate at particular frequencies.
    • Distinguishes an alcohol from a carboxylic acid by the position and breadth of the O–H absorption.

    Common mistakes and how to put them right

    • Confuses the alcohol O–H and carboxylic acid O–H positions.

      Put it right: Use the higher wavenumber range for the alcohol and the lower, broader range for the acid.

    • Reads wavenumbers as wavelengths.

      Put it right: IR absorptions are quoted in wavenumbers, cm⁻¹.

    • Assumes the fingerprint region identifies a functional group.

      Put it right: Use it to match a whole compound against a reference spectrum.

    Exam tips

    • State the bond and the functional group together, for example a broad O–H absorption indicating an alcohol.
    • Quote the approximate wavenumber range to justify each assignment rather than naming a group alone.
    • Use the fingerprint region only when the question asks you to identify a specific compound.

    Try the lesson

    The start of the Spectroscopy: (iii) IR spectra (see also 4.2.4 d–e) lesson, made from teaching notes for this specification point.

    Listen

    Infrared spectroscopy identifies bonds by the frequencies at which they absorb IR radiation, because each bond vibrates at characteristic wavenumbers measured in cm⁻¹. You read an IR spectrum by matching absorption peaks to functional groups: a broad O–H absorption around 2500–3300 cm⁻¹ indicates a carboxylic acid, a broad O–H around 3200–3600 cm⁻¹ indicates an alcohol, a sharp C=O around 1680–1750 cm⁻¹ indicates a carbonyl, and C–H stretches appear just below 3000 cm⁻¹. The fingerprint region below about 1500 cm⁻¹ gives a pattern useful for identifying a specific compound by comparison with a database. This builds on 4.2.4 d–e, where you met the IR spectrometer and the idea of absorption by bonds, so apply that instrumental background to assign peaks and to distinguish, for example, an alcohol from a carboxylic acid. A strong answer earns marks for these points. Matches a broad absorption around 2500–3300 cm⁻¹ to the O–H bond of a carboxylic acid. Matches a broad absorption around 3200–3600 cm⁻¹ to the O–H bond of an alcohol. Matches a sharp absorption around 1680–1750 cm⁻¹ to a C=O carbonyl group. Uses the fingerprint region below about 1500 cm⁻¹ to identify a compound by comparison with a database. Exam tip: State the bond and the functional group together, for example a broad O–H absorption indicating an alcohol.

    See it

    A flowchart starting from a single node labelled 'IR spectrum', which branches to five absorption features: a broad O–H around 2500–3300 cm⁻¹, a broad O–H around 3200–3600 cm⁻¹, a sharp C=O around 1680–1750 cm⁻¹, C–H stretches just below 3000 cm⁻¹, and the fingerprint region below about 1500 cm⁻¹. The first O–H feature leads to 'Carboxylic acid', the second O–H feature leads to 'Alcohol', the sharp C=O feature leads to 'Carbonyl group', and the fingerprint region leads to 'Identify compound by comparison with a database'. The C–H stretches node has no further branch.
    Shows how absorption peaks in an IR spectrum are matched to functional groups, and how the fingerprint region is used to identify a compound.

    Key words

    Say what each word means before you turn the card.

    Characteristic bond absorptions in IR

    Try answering aloud or in your head before turning the card.

    Functional group identification

    Try answering aloud or in your head before turning the card.

    Fingerprint region and compound matching

    Try answering aloud or in your head before turning the card.

    Bond vibration and absorption of IR radiation

    Try answering aloud or in your head before turning the card.

    See every definition
    Characteristic bond absorptions in IR
    Bonds absorb IR radiation at characteristic wavenumbers because each bond vibrates at particular frequencies, measured in cm⁻¹.
    Functional group identification
    Absorption peaks are matched to functional groups, such as a broad O–H around 2500–3300 cm⁻¹ for a carboxylic acid or a sharp C=O around 1680–1750 cm⁻¹ for a carbonyl.
    Fingerprint region and compound matching
    The region below about 1500 cm⁻¹ gives a pattern useful for identifying a specific compound by comparison with a database.
    Bond vibration and absorption of IR radiation
    Infrared spectroscopy identifies bonds by the frequencies at which they absorb IR radiation, because each bond vibrates at characteristic wavenumbers.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A flowchart starting from a single node labelled 'IR spectrum', which branches to five absorption features: a broad O–H around 2500–3300 cm⁻¹, a broad O–H around 3200–3600 cm⁻¹, a sharp C=O around 1680–1750 cm⁻¹, C–H stretches just below 3000 cm⁻¹, and the fingerprint region below about 1500 cm⁻¹. The first O–H feature leads to 'Carboxylic acid', the second O–H feature leads to 'Alcohol', the sharp C=O feature leads to 'Carbonyl group', and the fingerprint region leads to 'Identify compound by comparison with a database'. The C–H stretches node has no further branch.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Spectroscopy: (iii) IR spectra (see also 4.2.4 d–e)

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge