OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    Use of apparatus and techniques: (i) a solid product by recrystallisation

    Recrystallisation purifies an impure solid by dissolving it in the minimum volume of hot solvent, then cooling so the purified solid crystallises while most impurities stay dissolved or are…

    • Point 10 of 17
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Recrystallisation purifies an impure solid by dissolving it in the minimum volume of hot solvent, then cooling so the purified solid crystallises while most impurities stay dissolved or are removed by filtration. The learner selects the correct solvent (one in which the product is much more soluble hot than cold), dissolves the solid in the minimum hot solvent, allows slow cooling to form crystals, then filters under reduced pressure using a Büchner funnel and washes the crystals with a little cold solvent. Slow cooling gives larger, purer crystals; rapid cooling traps impurities. The solid is then dried between filter papers or in an oven. Assessment asks the learner to choose the correct step, apparatus or reason at each stage.

    What earns the marks

    • Identifies a solvent in which the solid is appreciably more soluble when hot than when cold.
    • Selects the minimum volume of hot solvent needed to dissolve the impure solid.
    • Explains that slow cooling allows purified crystals to form while impurities remain in solution.
    • Chooses filtration under reduced pressure with a Büchner funnel to collect the crystals.
    • States that washing with a little cold solvent removes soluble impurities from the crystal surface.

    Common mistakes and how to put them right

    • Uses a large excess of hot solvent.

      Put it right: Use the minimum volume so the solution is saturated on cooling.

    • Cools the solution rapidly in ice.

      Put it right: Cool slowly so large pure crystals form and impurities stay dissolved.

    • Washes the crystals with hot solvent.

      Put it right: Wash with a little cold solvent to avoid dissolving the product.

    Exam tips

    • Link each step to its purpose: dissolving, cooling, filtering, washing, drying.
    • Check the solubility profile of the chosen solvent before selecting it.
    • Remember the product is the purified solid collected on the filter, not the filtrate.

    Try the lesson

    The start of the Use of apparatus and techniques: (i) a solid product by recrystallisation lesson, made from teaching notes for this specification point.

    Listen

    Recrystallisation purifies an impure solid by dissolving it in the minimum volume of hot solvent, then cooling so the purified solid crystallises while most impurities stay dissolved or are removed by filtration. The learner selects the correct solvent (one in which the product is much more soluble hot than cold), dissolves the solid in the minimum hot solvent, allows slow cooling to form crystals, then filters under reduced pressure using a Büchner funnel and washes the crystals with a little cold solvent. Slow cooling gives larger, purer crystals; rapid cooling traps impurities. The solid is then dried between filter papers or in an oven. Assessment asks the learner to choose the correct step, apparatus or reason at each stage. A strong answer earns marks for these points. Identifies a solvent in which the solid is appreciably more soluble when hot than when cold. Selects the minimum volume of hot solvent needed to dissolve the impure solid. Explains that slow cooling allows purified crystals to form while impurities remain in solution. Chooses filtration under reduced pressure with a Büchner funnel to collect the crystals. Exam tip: Link each step to its purpose: dissolving, cooling, filtering, washing, drying.

    See it

    A top-to-bottom flowchart. The first box says to choose a solvent in which the solid is much more soluble hot than cold. An arrow leads to dissolving the impure solid in the minimum volume of hot solvent. An arrow leads to cooling slowly so purified crystals form. From this box two arrows branch: one leads to a box saying impurities remain in solution, the other leads to filtering under reduced pressure with a Büchner funnel. From the filtering box an arrow leads to washing the crystals with a little cold solvent, and from there an arrow leads to drying the purified solid.
    The sequence of steps that purifies an impure solid by recrystallisation, from choosing a solvent to drying the purified solid.

    Key words

    Say what each word means before you turn the card.

    Choice of solvent by solubility

    Try answering aloud or in your head before turning the card.

    Minimum hot solvent

    Try answering aloud or in your head before turning the card.

    Slow cooling and crystallisation

    Try answering aloud or in your head before turning the card.

    Filtration under reduced pressure and washing

    Try answering aloud or in your head before turning the card.

    See every definition
    Choice of solvent by solubility
    A solvent is chosen in which the solid is appreciably more soluble when hot than when cold.
    Minimum hot solvent
    The smallest volume of hot solvent needed to dissolve the impure solid, so the solution is saturated on cooling.
    Slow cooling and crystallisation
    Cooling slowly allows purified crystals to form while impurities remain in solution, giving larger, purer crystals.
    Filtration under reduced pressure and washing
    Crystals are collected using a Büchner funnel and washed with a little cold solvent to remove soluble impurities from the crystal surface.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-to-bottom flowchart. The first box says to choose a solvent in which the solid is much more soluble hot than cold. An arrow leads to dissolving the impure solid in the minimum volume of hot solvent. An arrow leads to cooling slowly so purified crystals form. From this box two arrows branch: one leads to a box saying impurities remain in solution, the other leads to filtering under reduced pressure with a Büchner funnel. From the filtering box an arrow leads to washing the crystals with a little cold solvent, and from there an arrow leads to drying the purified solid.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Use of apparatus and techniques: (i) a solid product by recrystallisation

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge