Microbiological techniques — OCR GCSE Biology
Microbiological techniques explained
Microbiological techniques covers 4 specification points, including Use of appropriate apparatus and techniques… and Use of appropriate apparatus, techniques and….
Read the full explanation
Open a point below for its explanation and revision guidance.
Use of appropriate apparatus and techniques for the observation and measurement of biological changes and/or processes
The efficacy of antimicrobials (antibiotics, antiseptics, or plant extracts) against bacteria such as Escherichia coli or Bacillus subtilis is evaluated using the disc diffusion method on agar plates. A sterile bacterial lawn is spread evenly across nutrient agar. Filter paper discs impregnated with known concentrations of test substances, alongside a negative control disc soaked in sterile water, are placed onto the agar using sterile forceps. Following incubation, clear circular zones of inhibition appear where bacterial growth has been prevented. The diameter of each clear zone is measured in two perpendicular directions using a millimetre ruler to calculate mean diameter and clear zone area (Area = πr²).
Use of appropriate apparatus, techniques and magnification, including microscopes, to make observations of biological specimens and produce labelled scientific drawings
Microscopic examination of cultured microorganisms (such as budding Saccharomyces cerevisiae yeast or stained bacterial smears) requires high magnification and contrast enhancement. A bacterial smear is prepared by mixing a loopful of culture in sterile water on a glass slide, air-drying, and heat-fixing gently over a Bunsen flame to adhere cells without distorting cellular morphology. Applying stains such as crystal violet or methylene blue provides contrast against cell walls and cytoplasm. Under high power (400x) or oil immersion (1000x), individual cell shapes (cocci, bacilli) and budding structures are resolved. Scientific drawings must show clear continuous outlines, accurate proportions, and total magnification.
Safe use of appropriate heating devices and techniques including use of a Bunsen burner and a water bath or electric heater
Safe heating underpins aseptic technique. A roaring blue Bunsen flame creates an upward convection current; working within about 20 cm of it prevents airborne microbes settling on open agar plates. Metal inoculating loops are flamed to red heat along their length and air-cooled before transferring bacteria, and culture bottle necks are passed briefly through the flame on opening and before recapping. A water bath or electric heater provides a controlled, flameless heat source for incubating cultures or melting cooled agar at a set temperature, avoiding the risk of overheating or igniting flammable materials. In school laboratories, inoculated petri dishes are taped with two pieces of adhesive tape (not sealed completely airtight) and incubated inverted at a maximum of 25 °C to prevent pathogen growth.
Use of appropriate apparatus to make and record a range of measurements accurately, including length, area, mass, time, temperature, volume of liquids and gases, and pH
Quantitative microbiology requires accurate measurement of many parameters. Liquid culture volumes are transferred with sterile graduated micropipettes or syringes (e.g. 0.1 cm³) to give uniform lawns. Clear zones of inhibition are measured with a transparent millimetre ruler through the base of the inverted, unopened petri dish; two perpendicular diameters are averaged and area found using Area = πr². Mass is recorded with a balance, for example when weighing agar powder or a filter-paper disc. Time is timed with a digital clock over 24 to 48 hours, and temperature is checked with a calibrated digital thermometer at 25 °C. Gas volumes may be collected in a gas syringe, and pH is measured with a pH meter or indicator paper to check media or buffer solutions.
Your focus
- Prepare a bacterial lawn and apply antimicrobial discs using aseptic technique on nutrient agar plates.
- Measure zones of inhibition accurately across perpendicular axes and calculate clear zone area using Area = πr².
- Evaluate the comparative effectiveness of different antiseptics or antibiotics using quantitative zone data.
Show all 14 objectives
- Prepare, heat-fix, and stain microbial smears safely on microscope slides.
- Observe and focus on single-celled microorganisms under high-power light microscopy.
- Produce labelled scientific drawings showing microbial morphology, budding stages, and magnification.
- Demonstrate aseptic techniques using Bunsen burner updrafts, loop sterilisation, and bottle neck flaming.
- Describe the safe use of a water bath or electric heater for controlled heating in microbiology.
- Explain why school bacterial cultures are incubated at 25 °C rather than human body temperature (37 °C).
- Justify plate sealing and inversion protocols to ensure aerobic conditions and prevent condensation dropping onto colonies.
- Measure liquid culture volumes accurately using sterile pipettes to establish uniform bacterial lawns.
- Measure clear zone diameters safely through the petri dish base and calculate inhibition zone areas (Area = πr²).
- Select appropriate apparatus to measure length, area, mass, time, temperature, volume of liquids and gases, and pH.
- Monitor and record incubator temperature and incubation duration to ensure reproducible microbiological data.
Microbiological techniques exam tips
Marking Points
- Prepare an even bacterial lawn on nutrient agar using a sterile spreader or inoculating loop.
- Apply paper discs impregnated with antimicrobial agents and a control disc soaked in sterile water using sterile forceps.
- Measure the diameter of clear zones of inhibition in two perpendicular directions and calculate the mean diameter.
- Calculate the area of the zone of inhibition using the formula Area = πr² to quantify and compare antimicrobial effectiveness.
- Prepare a thin microbial smear, air-dry completely, and heat-fix gently over a Bunsen flame to adhere cells to the slide.
- Apply biological stains (such as methylene blue or crystal violet) to enhance contrast of colorless microbial cells.
- Examine specimens under high magnification (400x or oil immersion) using fine focus adjustment to resolve cellular detail.
- Produce a scientific drawing of observed microorganisms with clear continuous pencil outlines, labelled structures, and magnification stated.
- Work within the sterile upward convection current created by a roaring blue Bunsen burner flame to prevent airborne contamination.
- Sterilise metal inoculating loops by heating to red heat in a Bunsen flame and allowing them to cool before sampling cultures.
- Flame the necks of culture bottles immediately upon opening and prior to recapping to prevent airborne microbes entering the broth.
- Use a water bath or electric heater to provide controlled, flameless heating, for example to keep molten agar at about 45 °C or to incubate cultures at a set temperature.
- Incubate sealed agar plates inverted at a maximum temperature of 25 °C in schools to prevent the selective growth of human pathogens.
- Dispense precise volumes of bacterial culture (e.g. 0.1 cm³) using sterile micropipettes or graduated syringes to produce uniform lawns.
- Measure zone of inhibition diameters through the bottom of the unopened petri dish to the nearest millimetre using a transparent ruler.
- Calculate mean diameter from perpendicular measurements and determine zone area using the equation Area = πr².
- Record mass with a balance, for example when weighing agar or filter-paper discs, and measure pH with a pH meter or indicator paper.
- Monitor and record incubation temperature with a digital thermometer (25 °C) and time the incubation period over 24 to 48 hours.
Examiner Tips
- 💡When calculating zone of inhibition area, remember to halve the diameter to find the radius (r) before applying Area = πr².
- 💡State clearly that a larger zone of inhibition indicates a more effective antimicrobial agent because it inhibited bacterial growth over a greater distance.
- 💡Remember why heat-fixing is necessary: it kills the bacteria, adheres them firmly to the glass slide, and makes cell walls permeable to stains.
- 💡When drawing single-celled organisms, draw only a few representative cells clearly rather than trying to sketch an entire dense field of view.
- 💡If an exam question asks why school cultures are incubated at 25 °C rather than 37 °C, answer: 'to prevent the growth of pathogens harmful to humans'.
- 💡State why petri dishes are taped with only two strips: 'to allow oxygen to enter, preventing the growth of harmful anaerobic bacteria'.
- 💡When asked about a water bath or electric heater, link it to controlled temperature and safety: no naked flame, so flammable materials are not ignited.
- 💡Always note that measurements of inhibition zones are taken without opening the lid, ensuring safety and containment of cultured microorganisms.
- 💡Show all calculation steps clearly: state diameter, divide by 2 to find radius, then calculate πr² with correct units (mm²).
- 💡Match each measurement to its apparatus: ruler for length, balance for mass, clock for time, thermometer for temperature, syringe for gas volume, pH meter for pH.
Common Mistakes
- Measuring across only one diameter of an irregular zone of inhibition rather than taking perpendicular readings to find a true mean.
- Omitting a negative control disc (sterile water), making it impossible to prove that the paper disc itself did not inhibit bacterial growth.
- Opening the petri dish lid fully during disc placement, allowing airborne mold spores and environmental bacteria to contaminate the plate.
- Overheating the slide during heat-fixation, which chars the microorganisms, ruptures cell walls, and alters cellular morphology.
- Making the bacterial smear too thick, creating dense clumps of cells that light cannot penetrate, preventing individual cell observation.
- Using the coarse adjustment knob at high magnification, risking collision between the objective lens and glass slide.
- Sealing the petri dish completely with tape around the entire circumference, creating anaerobic conditions that favour dangerous pathogenic bacteria.
- Using an inoculating loop immediately after flaming while it is still red-hot, which kills the bacteria being sampled.
- Incubating culture plates at 37 °C (human body temperature) in school laboratories, creating serious biological hazard risks.
- Using a naked Bunsen flame to heat flammable liquids or placing a water bath or electric heater where it can overheat or ignite materials.
- Opening the lid of the petri dish after incubation to measure inhibition zones, releasing potentially hazardous cultured bacteria into the room.
- Using the diameter instead of the radius in the area formula Area = πr², overestimating the clear zone area by a factor of four.
- Dispensing unmeasured volumes of bacterial suspension onto agar plates, resulting in uneven lawn thickness and irregular diffusion zones.
- Recording pH with a meter that has not been calibrated, or reading a meniscus at eye level incorrectly when measuring liquid volume.