Skip to topic
    ← Back to course topics

    Microscopy — OCR GCSE Biology

    Microscopy explained

    Microscopy covers 2 specification points, including Use of appropriate apparatus, techniques and… and Use of appropriate apparatus to make and….

    Read the full explanation

    Open a point below for its explanation and revision guidance.

    Use of appropriate apparatus, techniques and magnification, including microscopes, to make observations of biological specimens and produce labelled scientific drawings

    Learners prepare temporary mounts: a single layer of onion epidermis stained with iodine, or cheek epithelium stained with methylene blue, is placed on a clean slide and a coverslip is lowered at about 45 degrees with a mounted needle to avoid trapping air bubbles. The slide is viewed on a compound light microscope, starting on the lowest power objective (4x), focusing with the coarse knob then the fine knob, before moving to higher power. Biological drawings use unbroken pencil lines, no shading, accurate proportions, and state the total magnification (eyepiece x objective, e.g. 10 x 40 = 400x). Labels are straight, uncrossed lines touching the structure named, such as nucleus, cell wall and cytoplasm.

    Use of appropriate apparatus to make and record a range of measurements accurately, including length, area, mass, time, temperature, volume of liquids and gases, and pH

    Microscopy measurements use an eyepiece graticule calibrated against a stage micrometer of known scale, giving the true value of each graticule division at a stated objective. Actual size is found from actual size = image size / magnification (A = I / M), with all lengths in the same unit; convert mm to micrometres and micrometres to nanometres by multiplying by 1000. Repeating measurements on several randomly selected cells and calculating a mean reduces the effect of natural variation. The same practical skills cover other quantities: area by counting squares or using length x width, mass with a balance, time with a stopwatch, temperature with a thermometer, liquid volume with a measuring cylinder, gas volume by displacement or a syringe, and pH with a calibrated pH probe (universal indicator gives an approximate value).

    Your focus

    1. Prepare a temporary slide mount of plant or animal cells using suitable stains and bubble-free coverslip technique.
    2. Operate a compound light microscope systematically using coarse and fine focus across low and high power objectives.
    3. Produce an accurate, labelled scientific drawing of observed cells following standard biological drawing rules.
    Show all 7 objectives
    1. Calibrate an eyepiece graticule using a stage micrometer at different microscope magnifications.
    2. Apply the formula actual size = image size / magnification with correct unit conversions between mm, µm, and nm.
    3. Measure cell lengths accurately using a graticule and calculate mean dimensions across multiple cells.
    4. Select and use appropriate apparatus to measure length, area, mass, time, temperature, volume of liquids and gases, and pH, recording physical quantities with units and pH without a unit.

    Microscopy exam tips

    Marking Points
    • Lower the coverslip slowly at an angle using a mounted needle so air bubbles are not trapped over the stained specimen.
    • Begin viewing on the lowest power objective lens, focus with the coarse knob until the specimen appears, then sharpen with the fine knob before changing objective.
    • Produce biological drawings with single unbroken pencil lines, no shading or cross-hatching, accurate proportions, and the total magnification stated.
    • Draw straight, uncrossed label lines that touch the structure named, without arrowheads, and label only structures actually visible.
    • Calculate total magnification by multiplying eyepiece magnification by objective magnification, e.g. 10 x 40 = 400x.
    • Calibrate the eyepiece graticule against a stage micrometer to find the true distance per graticule division at each magnification.
    • Calculate actual specimen size using actual size = image size / magnification, ensuring image size and actual size share the same unit.
    • Convert millimetres to micrometres by multiplying by 1000, and micrometres to nanometres by multiplying by 1000.
    • Measure several representative cells across the field of view and calculate a mean length to reduce the effect of biological variation.
    • Select suitable apparatus for each quantity: balance for mass, stopwatch for time, thermometer for temperature, measuring cylinder for liquid volume, gas syringe or displacement for gas volume, and calibrated pH probe for precise pH (indicator gives an approximation).
    • Record area by counting grid squares or multiplying measured length by width, and state units for physical measurements; pH is dimensionless.
    Examiner Tips
    • 💡Calculate total magnification by multiplying the eyepiece lens magnification (typically 10x) by the objective lens magnification.
    • 💡When asked to evaluate a biological drawing in an exam, check for uncrossed label lines, absence of shading, and clear continuous outlines.
    • 💡Use the formula triangle with Image size at the top, and Actual size and Magnification at the bottom to rearrange calculations easily.
    • 💡Always check unit prefixes carefully: 1 mm = 1000 µm, and 1 µm = 1000 nm. Convert both measurements to matching units before calculating magnification.
    Common Mistakes
    • Using a thick tissue sample that overlaps several cell layers, so light transmission is poor and cellular detail is obscured; correct by peeling a single thin layer such as onion epidermis.
    • Drawing with sketchy lines, artistic shading, or omitting the stated magnification; correct by using one continuous pencil line per outline and recording the total magnification.
    • Focusing with the high-power objective first, which risks cracking the coverslip and damaging the lens; correct by focusing on low power, then moving to high power and using only the fine knob.
    • Forgetting to convert image size and actual size into matching units before using the magnification formula; correct by converting both to the same unit first.
    • Assuming eyepiece graticule divisions represent a fixed distance without calibrating against a stage micrometer for each objective lens; correct by recalibrating at each magnification.
    • Measuring only a single atypical cell rather than calculating a mean from multiple measurements; correct by sampling several cells and averaging.
    • Recording a number without a unit, or reading a measuring cylinder from the wrong part of the meniscus; correct by reading the bottom of the meniscus at eye level and stating units for physical measurements; pH has no unit.