Developments in new materials - Smart materials — AQA GCSE Design and Technology
Developments in new materials - Smart materials explained
Smart materials are materials whose properties change significantly and in a controlled way when an external stimulus acts on them.
Read the full explanation
The stimulus might be stress, temperature, moisture or pH, and one material may respond to more than one. Shape memory alloys, such as nitinol, return to a set shape when warmed above a transition temperature, so they suit spectacle frames that spring back or actuators that reset. Thermochromic pigments change colour as temperature rises or falls, which is useful for kettle or bath indicators. Photochromic pigments darken when ultraviolet light strikes them and clear again when it fades, as in reactive spectacle lenses. A question asks you to identify the stimulus that triggers a stated change, so match the material to its stimulus and to the controlled, reversible nature of the change.
Your focus
- Define a smart material in terms of a controlled response to a stimulus.
- Match shape memory alloys, thermochromic pigments and photochromic pigments to their triggering stimuli.
- Explain why a smart material's change is described as controlled and often reversible.
Developments in new materials - Smart materials exam tips
Marking Points
- Defines a smart material as one whose properties change significantly and in a controlled way in response to an external stimulus.
- Names stress, temperature, moisture and pH as possible stimuli and recognises that a material may respond to more than one.
- Matches shape memory alloys to a temperature-triggered return to a set shape.
- Matches thermochromic pigments to a temperature-triggered colour change and photochromic pigments to a light-triggered colour change.
- Recognises that the change is controlled and often reversible rather than random or permanent.
Examiner Tips
- 💡Identify the stimulus named in the question first, then select the material that responds to it.
- 💡Use the example pairs from the specification, such as shape memory alloy with temperature, to rule out mismatched options.
- 💡Check that the option describes a controlled change rather than an uncontrolled or one-off effect.
Common Mistakes
- Treats any colour change as proof of a smart material; correct this by checking that the change is controlled and triggered by a named stimulus.
- Confuses thermochromic and photochromic pigments; correct this by linking thermochromic to temperature and photochromic to light.
- Assumes a smart material responds to only one stimulus; correct this by allowing that a material may respond to several, such as stress and temperature.