Alternative processes that can be used to manufacture paper and board products to different scales of production — Edexcel GCSE Design and Technology
Alternative processes that can be used to manufacture paper and board products to different scales of production explained
Paper and board products can be made at one-off, batch, mass or continuous scales of production, and each scale suits particular processes.
Read the full explanation
One-off production uses die cutting, hand cutting, scoring and folding for a single item such as a prototype card, giving flexibility but high unit cost. Batch production repeats a set quantity using a die cutter or lithographic printing, balancing tooling cost against volume. Mass and continuous production use automated die cutting, rotary printing and high-speed folding and gluing, giving very low unit cost but high setup cost and little flexibility. Selecting appropriately means matching the process to quantity, budget, finish and material. For example, a short run of 50 gift boxes suits batch die cutting, while 500 000 cereal cartons suit continuous rotary production.
Your focus
- Describe processes used to manufacture paper and board products
- Compare advantages and disadvantages of processes at different scales
- Select and justify an appropriate process for a given product and quantity
Alternative processes that can be used to manufacture paper and board products to different scales of production exam tips
Marking Points
- Matches a named process, such as die cutting or lithographic printing, to an appropriate scale of production
- States an advantage of the chosen process, such as low unit cost at high volume
- States a disadvantage, such as high setup or tooling cost for small runs
- Selects a process for a given product and quantity and justifies the choice against alternatives
Examiner Tips
- 💡Name the scale of production explicitly before discussing the process
- 💡Give one advantage and one disadvantage to show balanced discrimination
- 💡Link the selection to the specific product and quantity in the question
Common Mistakes
- Assumes the cheapest process per unit is always best; weigh setup cost against the production quantity
- Treats one-off and mass production as interchangeable; match the scale to the number of items required
- Ignores material and finish when choosing a process; check the process suits the paper or board and the required finish