Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality paper and board prototype — Edexcel GCSE Design and Technology
Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality paper and board prototype explained
Split pins (also called paper fasteners) are two-legged metal fixings pushed through punched holes in card or paper and then splayed to hold layers together while allowing a pivot.
Read the full explanation
In a paper and board prototype they make a neat, low-cost joint for moving parts such as a lever, a dial pointer, a pop-up tab or a hinged flap. The learner selects a split pin of suitable length, punches a hole slightly larger than the pin's shank, passes the legs through both layers, turns the work over and bends the legs outward and flat against the back so the joint grips without tearing the board. Correct choice of hole size, pin length and bending technique keeps the prototype flat, secure and free to rotate, which is what a high-quality assembly demands.
Your focus
- Identify a split pin and state the type of joint it produces in paper and board.
- Select a split pin of suitable length for the thickness of board being joined.
- Describe how to insert and splay a split pin to make a secure pivoting joint.
Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality paper and board prototype exam tips
Marking Points
- Identifies a split pin as a two-legged metal fastener that joins layers of paper or board while allowing a pivoting movement.
- Selects a split pin whose shank length suits the combined thickness of the board layers being joined.
- Punches a hole sized to admit the shank without crushing or tearing the board surface.
- Bends the splayed legs outward and flat against the reverse face so the joint holds firmly and still rotates.
- Explains that a split pin suits a moving joint such as a lever or dial pointer rather than a rigid permanent bond.
Examiner Tips
- 💡Link the fixing to the function of the prototype part, for example a lever that must pivot.
- 💡Describe the sequence: punch, insert, turn over, splay and flatten the legs.
- 💡Compare a split pin with a rigid fixing to justify why a moving joint needs one.
Common Mistakes
- Forces the pin through an undersized hole and splits the board; punch a hole slightly larger than the shank first.
- Leaves the legs straight or loosely bent so the joint rattles apart; splay and flatten both legs against the back.
- Chooses an overlong pin that protrudes and snags; match pin length to the combined board thickness.
- Treats a split pin as a permanent rigid fixing; recognise that it is chosen for pivoting, moving joints.