OCR · GCSE · Biology

    Course version: J247 · Version from Sept 2018

    Safe use of appropriate heating devices and techniques including use of a…

    Full specification wording

    Photosynthesis: Safe use of appropriate heating devices and techniques including use of a Bunsen burner and a water bath or electric heater

    Testing a leaf for starch requires heating steps that carry significant chemical fire hazards.

    • Point 15 of 15
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Testing a leaf for starch requires heating steps that carry significant chemical fire hazards. The leaf is first immersed in boiling water for 1 minute using a Bunsen burner, tripod, and wire gauze to soften cuticle wax, rupture cell membranes, and denature enzymes. The leaf is then placed into a boiling tube containing ethanol to extract green chlorophyll. Because ethanol is highly flammable, the Bunsen burner MUST be turned off completely before placing the tube of ethanol into the beaker of hot water, or an electric thermostatically controlled water bath must be used. Wearing eye protection, handling tubes with tongs, and avoiding all open flames near ethanol vapors ensures laboratory safety.

    What earns the marks

    • Boil the leaf in water to soften the cuticle, rupture cell membranes, and stop metabolic enzyme activity.
    • Place the leaf in a boiling tube of ethanol to dissolve and extract chlorophyll so that subsequent color changes are clearly visible.
    • Extinguish all Bunsen burner flames before placing ethanol tubes into hot water, or use an electric water bath to eliminate fire risk.
    • Wear eye protection and use forceps to retrieve the brittle decolorized leaf before rinsing in warm water to soften.

    Common mistakes and how to put them right

    • Heating ethanol in a boiling tube directly over an open Bunsen flame, creating an extreme flash fire hazard.

    • Skipping the water rinse after ethanol extraction, leaving the leaf brittle and prone to tearing when adding iodine.

    • Testing for starch without first extracting chlorophyll, making the blue-black color change impossible to see against green tissue.

    Exam tips

    • Examiners frequently ask for the specific safety precaution when extracting chlorophyll: state 'turn off the Bunsen burner before using ethanol'.
    • Know the four-step sequence for the starch test: boil in water (kills leaf), boil in ethanol in water bath (removes chlorophyll), dip in warm water (softens), add iodine.

    Try the lesson

    The start of the Photosynthesis: Safe use of appropriate heating devices and techniques including use of a Bunsen burner and a water bath or electric heater lesson, made from teaching notes for this specification point.

    Have a go first

    Which piece of equipment is designed to heat a water bath to a steady, moderate temperature for a photosynthesis investigation?

    Listen

    Testing a leaf for starch requires heating steps that carry significant chemical fire hazards. The leaf is first immersed in boiling water for 1 minute using a Bunsen burner, tripod, and wire gauze to soften cuticle wax, rupture cell membranes, and denature enzymes. The leaf is then placed into a boiling tube containing ethanol to extract green chlorophyll. Because ethanol is highly flammable, the Bunsen burner MUST be turned off completely before placing the tube of ethanol into the beaker of hot water, or an electric thermostatically controlled water bath must be used. Wearing eye protection, handling tubes with tongs, and avoiding all open flames near ethanol vapors ensures laboratory safety. A strong answer earns marks for these points. Boil the leaf in water to soften the cuticle, rupture cell membranes, and stop metabolic enzyme activity. Place the leaf in a boiling tube of ethanol to dissolve and extract chlorophyll so that subsequent color changes are clearly visible. Extinguish all Bunsen burner flames before placing ethanol tubes into hot water, or use an electric water bath to eliminate fire risk. Wear eye protection and use forceps to retrieve the brittle decolorized leaf before rinsing in warm water to soften. Exam tip: Examiners frequently ask for the specific safety precaution when extracting chlorophyll: state 'turn off the Bunsen burner before using ethanol'.

    See it

    A flowchart running top to bottom. The first box says boil the leaf in water using a Bunsen burner, tripod and wire gauze, and an arrow leads to a box saying turn off the Bunsen burner completely. An arrow leads to a box saying place the leaf in a boiling tube of ethanol in hot water, or use an electric water bath. An arrow leads to a box saying ethanol extracts chlorophyll. An arrow leads to a box saying dip the leaf in warm water to soften. A final arrow leads to a box saying add iodine to test for starch.
    The four-step leaf starch test sequence, showing that the Bunsen burner must be turned off before the ethanol step.

    Put it in order

    Put these steps in the order they happen.

    1. 1. Place leaf in boiling tube of ethanol in hot water, or use electric water bath
    2. 2. Turn off Bunsen burner completely
    3. 3. Boil leaf in water using Bunsen burner, tripod and wire gauze
    4. 4. Add iodine to test for starch
    5. 5. Dip leaf in warm water to soften
    6. 6. Ethanol extracts chlorophyll

    Key words

    Say what each word means before you turn the card.

    ethanol

    Try answering aloud or in your head before turning the card.

    water bath

    Try answering aloud or in your head before turning the card.

    Bunsen burner

    Try answering aloud or in your head before turning the card.

    eye protection

    Try answering aloud or in your head before turning the card.

    See every definition
    ethanol
    A highly flammable liquid used to dissolve and extract chlorophyll from the leaf so that subsequent colour changes are clearly visible.
    water bath
    A heated water container, either thermostatically controlled electric or a beaker of hot water, used to heat the tube of ethanol without an open flame.
    Bunsen burner
    A heating device used with a tripod and wire gauze to boil the leaf in water, and which must be turned off completely before ethanol is used.
    eye protection
    Safety wear required during the procedure, along with handling tubes with tongs and avoiding all open flames near ethanol vapours.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A flowchart running top to bottom. The first box says boil the leaf in water using a Bunsen burner, tripod and wire gauze, and an arrow leads to a box saying turn off the Bunsen burner completely. An arrow leads to a box saying place the leaf in a boiling tube of ethanol in hot water, or use an electric water bath. An arrow leads to a box saying ethanol extracts chlorophyll. An arrow leads to a box saying dip the leaf in warm water to soften. A final arrow leads to a box saying add iodine to test for starch.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Photosynthesis: Safe use of appropriate heating devices and techniques including use of a Bunsen burner and a water bath or electric heater

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge