OCR · GCSE · Biology

    Course version: J247 · Version from Sept 2018

    Measurement of rates of reaction by a variety of methods including…

    Full specification wording

    Rates of enzyme-controlled reactions: Measurement of rates of reaction by a variety of methods including production of gas, uptake of water and colour change of indicator

    Enzyme reaction rates can be measured by several methods.

    • Point 3 of 4
    • 3 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Enzyme reaction rates can be measured by several methods. Gas production: catalase breaks down hydrogen peroxide, releasing oxygen collected in a gas syringe or over water in an inverted measuring cylinder at timed intervals; rate = volume of gas ÷ time (cm³ s⁻¹). Uptake of water: in a respirometer, carbon dioxide produced by respiring yeast is absorbed by an alkali such as potassium hydroxide, so the gas volume falls and water is drawn in to replace it; the distance the water droplet moves per unit time gives the rate. Colour change of indicator: time amylase to digest starch until iodine no longer turns blue-black, or time trypsin clearing milk suspension against a printed cross; rate = 1 ÷ time to end point. Initial rate is found from the tangent to the steepest part of a product-time curve.

    What earns the marks

    • Measure gas production by collecting oxygen from catalase-hydrogen peroxide reactions in a gas syringe or inverted measuring cylinder over water at timed intervals; rate = volume ÷ time.
    • Measure rate by uptake of water using a respirometer: carbon dioxide is absorbed by an alkali, reducing gas volume so water moves in; record the distance moved per unit time.
    • Measure rate of colour change by timing an indicator or suspension end point, such as iodine no longer turning blue-black as amylase digests starch, or milk clearing with trypsin; rate = 1 ÷ time.
    • Draw a tangent to the steepest initial portion of a product-versus-time curve to calculate the initial rate of reaction.
    • Explain why initial rate gives the most valid measure of enzyme activity before substrate concentration becomes limiting.

    Common mistakes and how to put them right

    • Calculating an overall average rate over several minutes rather than the initial rate, missing the peak kinetic velocity.

    • Allowing gas bubbles to leak from rubber delivery tubing connections or bungs, under-recording true gas volumes.

    • Confusing the time taken for a reaction with the rate of reaction.

      Put it right: Shorter times represent faster reaction rates.

    • In the respirometer, forgetting to include an alkali to absorb carbon dioxide, so the water droplet does not move and no uptake is recorded.

    Exam tips

    • Always sketch a tangent at time = 0 when asked to find the initial rate from a graph of gas volume against time, and show change in y over change in x.
    • Be ready to explain why rate slows over time: substrate molecules are used up, leading to fewer successful collisions with enzyme active sites.
    • For uptake-of-water questions, state that the alkali absorbs carbon dioxide so the pressure change is due to oxygen use, causing water to move in.

    Try the lesson

    The start of the Rates of enzyme-controlled reactions: Measurement of rates of reaction by a variety of methods including production of gas, uptake of water and colour change of indicator lesson, made from teaching notes for this specification point.

    Have a go first

    In an enzyme-controlled reaction that produces a gas, which apparatus is used to collect and measure the volume of gas produced?

    Listen

    Enzyme reaction rates can be measured by several methods. Gas production: catalase breaks down hydrogen peroxide, releasing oxygen collected in a gas syringe or over water in an inverted measuring cylinder at timed intervals; rate = volume of gas ÷ time (cm³ s⁻¹). Uptake of water: in a respirometer, carbon dioxide produced by respiring yeast is absorbed by an alkali such as potassium hydroxide, so the gas volume falls and water is drawn in to replace it; the distance the water droplet moves per unit time gives the rate. Colour change of indicator: time amylase to digest starch until iodine no longer turns blue-black, or time trypsin clearing milk suspension against a printed cross; rate = 1 ÷ time to end point. Initial rate is found from the tangent to the steepest part of a product-time curve. A strong answer earns marks for these points. Measure gas production by collecting oxygen from catalase-hydrogen peroxide reactions in a gas syringe or inverted measuring cylinder over water at timed intervals; rate = volume ÷ time. Measure rate by uptake of water using a respirometer: carbon dioxide is absorbed by an alkali, reducing gas volume so water moves in; record the distance moved per unit time. Measure rate of colour change by timing an indicator or suspension end point, such as iodine no longer turning blue-black as amylase digests starch, or milk clearing with trypsin; rate = 1 ÷ time. Draw a tangent to the steepest initial portion of a product-versus-time curve to calculate the initial rate of reaction. Exam tip: Always sketch a tangent at time = 0 when asked to find the initial rate from a graph of gas volume against time, and show change in y over change in x.

    Key words

    Say what each word means before you turn the card.

    gas collection apparatus

    Try answering aloud or in your head before turning the card.

    initial rate and tangent calculations

    Try answering aloud or in your head before turning the card.

    colorimetric and indicator endpoints

    Try answering aloud or in your head before turning the card.

    See every definition
    gas collection apparatus
    Equipment such as a gas syringe or an inverted measuring cylinder over water, used to collect oxygen released at timed intervals so that rate equals volume of gas divided by time.
    initial rate and tangent calculations
    The initial rate is found from the tangent to the steepest part of a product-time curve, giving the most valid measure of enzyme activity before substrate concentration becomes limiting.
    colorimetric and indicator endpoints
    Timing a colour change until an end point, such as iodine no longer turning blue-black as amylase digests starch, or milk clearing with trypsin, where rate equals 1 divided by time.

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Rates of enzyme-controlled reactions: Measurement of rates of reaction by a variety of methods including production of gas, uptake of water and colour change of indicator

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge