OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    Bonding and structure: The shapes of simple molecules and ions

    The shape of a simple molecule or ion is predicted from the number of electron pairs around the central atom using electron-pair repulsion theory.

    • Point 12 of 24
    • 3 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    The shape of a simple molecule or ion is predicted from the number of electron pairs around the central atom using electron-pair repulsion theory. Count the bonding pairs and lone pairs around the central atom, then arrange them so that repulsion is minimised. Two bonding pairs give a linear shape with a 180° bond angle; three give trigonal planar with 120°; four give tetrahedral with 109.5°. Lone pairs repel more strongly than bonding pairs, so they compress bond angles: one lone pair with three bonding pairs gives a trigonal pyramidal shape with an angle near 107°, and two lone pairs with two bonding pairs give a bent shape with an angle near 104.5°. Learners should apply this reasoning to molecules such as CH₄, NH₃ and H₂O and to ions such as NH₄⁺.

    What earns the marks

    • Counts the bonding pairs and lone pairs around the central atom to determine the total number of electron pairs.
    • Applies electron-pair repulsion theory to arrange electron pairs so that repulsion between them is minimised.
    • States the shape and approximate bond angle for a given number of bonding pairs and lone pairs, such as tetrahedral at 109.5° or bent at about 104.5°.
    • Explains that lone pairs repel more strongly than bonding pairs and therefore reduce bond angles compared with the corresponding arrangement without lone pairs.

    Common mistakes and how to put them right

    • Counts only bonding pairs and ignores lone pairs on the central atom.

      Put it right by including all electron pairs when predicting the shape.

    • Assumes lone pairs and bonding pairs repel equally.

      Put it right by stating that lone pairs repel more strongly and compress bond angles.

    • Gives a shape without relating it to the number of electron pairs.

      Put it right by linking each shape to its electron-pair arrangement and approximate angle.

    Exam tips

    • Draw the dot-and-cross diagram first so that lone pairs on the central atom are clearly visible before predicting the shape.
    • State both the shape and the approximate bond angle, and explain any reduction in angle by referring to lone-pair repulsion.
    • For ions, remember to account for the charge when counting electrons, for example the ammonium ion has four bonding pairs and no lone pairs.

    Try the lesson

    The start of the Bonding and structure: The shapes of simple molecules and ions lesson, made from teaching notes for this specification point.

    Listen

    The shape of a simple molecule or ion is predicted from the number of electron pairs around the central atom using electron-pair repulsion theory. Count the bonding pairs and lone pairs around the central atom, then arrange them so that repulsion is minimised. Two bonding pairs give a linear shape with a 180° bond angle; three give trigonal planar with 120°; four give tetrahedral with 109.5°. Lone pairs repel more strongly than bonding pairs, so they compress bond angles: one lone pair with three bonding pairs gives a trigonal pyramidal shape with an angle near 107°, and two lone pairs with two bonding pairs give a bent shape with an angle near 104.5°. Learners should apply this reasoning to molecules such as CH₄, NH₃ and H₂O and to ions such as NH₄⁺. A strong answer earns marks for these points. Counts the bonding pairs and lone pairs around the central atom to determine the total number of electron pairs. Applies electron-pair repulsion theory to arrange electron pairs so that repulsion between them is minimised. States the shape and approximate bond angle for a given number of bonding pairs and lone pairs, such as tetrahedral at 109.5° or bent at about 104.5°. Explains that lone pairs repel more strongly than bonding pairs and therefore reduce bond angles compared with the corresponding arrangement without lone pairs. A common slip: Counts only bonding pairs and ignores lone pairs on the central atom. Instead, including all electron pairs when predicting the shape. Exam tip: Draw the dot-and-cross diagram first so that lone pairs on the central atom are clearly visible before predicting the shape.

    See it

    A top-down flowchart. The first box says count bonding pairs and lone pairs around the central atom, and an arrow leads to a box saying arrange electron pairs to minimise repulsion. From this box five arrows lead to five electron-pair counts: two bonding pairs and zero lone pairs; three bonding pairs and zero lone pairs; four bonding pairs and zero lone pairs; three bonding pairs and one lone pair; and two bonding pairs and two lone pairs. Each count then leads to its shape and angle: linear at 180 degrees; trigonal planar at 120 degrees; tetrahedral at 109.5 degrees; trigonal pyramidal at near 107 degrees; and bent at near 104.5 degrees.
    It shows how counting bonding pairs and lone pairs around the central atom leads, via minimised repulsion, to each shape and its approximate bond angle.

    Key words

    Say what each word means before you turn the card.

    Electron-pair repulsion theory

    Try answering aloud or in your head before turning the card.

    Counting bonding and lone pairs

    Try answering aloud or in your head before turning the card.

    Shapes and bond angles of simple molecules and ions

    Try answering aloud or in your head before turning the card.

    See every definition
    Electron-pair repulsion theory
    The shape of a simple molecule or ion is predicted from the number of electron pairs around the central atom using this theory, arranging them so that repulsion is minimised.
    Counting bonding and lone pairs
    The bonding pairs and lone pairs around the central atom are counted to determine the total number of electron pairs.
    Shapes and bond angles of simple molecules and ions
    Two bonding pairs give a linear shape with a 180° bond angle; three give trigonal planar with 120°; four give tetrahedral with 109.5°.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart. The first box says count bonding pairs and lone pairs around the central atom, and an arrow leads to a box saying arrange electron pairs to minimise repulsion. From this box five arrows lead to five electron-pair counts: two bonding pairs and zero lone pairs; three bonding pairs and zero lone pairs; four bonding pairs and zero lone pairs; three bonding pairs and one lone pair; and two bonding pairs and two lone pairs. Each count then leads to its shape and angle: linear at 180 degrees; trigonal planar at 120 degrees; tetrahedral at 109.5 degrees; trigonal pyramidal at near 107 degrees; and bent at near 104.5 degrees.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Bonding and structure: The shapes of simple molecules and ions

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge