OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (d) explanation that the feasibility of a process depends upon the entropy…

    Full specification wording

    Enthalpy and entropy: (d) explanation that the feasibility of a process depends upon the entropy change and temperature in the system, T∆S, and the enthalpy change of the system, ∆H

    Feasibility is judged by the total entropy change of the universe, which combines two system quantities: the enthalpy change ∆H and the entropy change ∆S, with temperature T in kelvin.

    • Point 5 of 7
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    Feasibility is judged by the total entropy change of the universe, which combines two system quantities: the enthalpy change ∆H and the entropy change ∆S, with temperature T in kelvin. The entropy term is written T∆S, so its sign follows ∆S: a positive ∆S gives a positive T∆S, and a negative ∆S gives a negative T∆S. The Gibbs relation ∆G = ∆H − T∆S links them, and a process is feasible when ∆G is negative, equivalently when ∆H − T∆S < 0. A negative ∆H favours feasibility; a positive ∆S also favours it. Temperature scales the T∆S term, so a reaction with positive ∆H and positive ∆S becomes feasible only above a threshold temperature, while one with negative ∆H and negative ∆S is feasible only below a threshold.

    What earns the marks

    • States that feasibility depends on the balance between the enthalpy change ∆H and the entropy term T∆S of the system.
    • Uses the relation ∆G = ∆H − T∆S and identifies a negative ∆G as the condition for a feasible process.
    • Explains that a negative ∆H favours feasibility because it lowers ∆G.
    • Explains that a positive ∆S favours feasibility because it makes the −T∆S term negative.
    • Recognises that temperature scales the T∆S term, so a positive ∆S with positive ∆H becomes feasible only above a threshold temperature.
    • Recognises that a negative ∆S with negative ∆H is feasible only below a threshold temperature because raising T makes −T∆S positive.

    Common mistakes and how to put them right

    • Claims that a negative ∆S favours feasibility.

      Put it right by noting that a negative ∆S makes the −T∆S term positive and so opposes feasibility.

    • Treats ∆H alone as deciding feasibility.

      Put it right by requiring the combined ∆H − T∆S to be negative.

    • Uses temperature in degrees Celsius in T∆S.

      Put it right by converting to kelvin before multiplying.

    • Assumes a positive ∆S guarantees feasibility at every temperature.

      Put it right by noting that a positive ∆H can outweigh T∆S at low temperature.

    Exam tips

    • Write the criterion as ∆H − T∆S < 0 and check the sign of each term before deciding feasibility.
    • Convert any temperature to kelvin by adding 273 before calculating T∆S.
    • For threshold-temperature questions, set ∆G = 0 so that T = ∆H ÷ ∆S and keep the units consistent.
    • State explicitly which term favours and which opposes feasibility rather than giving a single verdict.

    Try the lesson

    The start of the Enthalpy and entropy: (d) explanation that the feasibility of a process depends upon the entropy change and temperature in the system, T∆S, and the enthalpy change of the system, ∆H lesson, made from teaching notes for this specification point.

    Listen

    Feasibility is judged by the total entropy change of the universe, which combines two system quantities: the enthalpy change ∆H and the entropy change ∆S, with temperature T in kelvin. The entropy term is written T∆S, so its sign follows ∆S: a positive ∆S gives a positive T∆S, and a negative ∆S gives a negative T∆S. The Gibbs relation ∆G = ∆H − T∆S links them, and a process is feasible when ∆G is negative, equivalently when ∆H − T∆S < 0. A negative ∆H favours feasibility; a positive ∆S also favours it. Temperature scales the T∆S term, so a reaction with positive ∆H and positive ∆S becomes feasible only above a threshold temperature, while one with negative ∆H and negative ∆S is feasible only below a threshold. A strong answer earns marks for these points. States that feasibility depends on the balance between the enthalpy change ∆H and the entropy term T∆S of the system. Uses the relation ∆G = ∆H − T∆S and identifies a negative ∆G as the condition for a feasible process. Explains that a negative ∆H favours feasibility because it lowers ∆G. Explains that a positive ∆S favours feasibility because it makes the −T∆S term negative. A common slip: Claims that a negative ∆S favours feasibility. Instead, noting that a negative ∆S makes the −T∆S term positive and so opposes feasibility. Exam tip: Write the criterion as ∆H − T∆S < 0 and check the sign of each term before deciding feasibility.

    See it

    A top-down flowchart. The top node 'Feasibility of a process' branches into two nodes: 'Enthalpy change of system, ∆H' and 'Entropy term, T∆S'. The entropy node branches into 'Temperature T in kelvin scales T∆S' and 'Sign of T∆S follows sign of ∆S'. The enthalpy node, the temperature node and the sign node all lead into a node '∆G = ∆H − T∆S', which leads to 'Feasible when ∆G is negative'. That node branches into four outcomes: 'Negative ∆H favours feasibility', 'Positive ∆S favours feasibility', 'Positive ∆H with positive ∆S: feasible only above a threshold temperature', and 'Negative ∆H with negative ∆S: feasible only below a threshold temperature'.
    Shows how the enthalpy change ∆H and the entropy term T∆S combine in ∆G = ∆H − T∆S to determine feasibility, including the effect of temperature.

    Key words

    Say what each word means before you turn the card.

    Gibbs free energy and feasibility

    Try answering aloud or in your head before turning the card.

    Enthalpy change of the system

    Try answering aloud or in your head before turning the card.

    Entropy change and the T∆S term

    Try answering aloud or in your head before turning the card.

    Temperature dependence and threshold temperature

    Try answering aloud or in your head before turning the card.

    See every definition
    Gibbs free energy and feasibility
    The relation ∆G = ∆H − T∆S links the enthalpy change and the entropy term, and a process is feasible when ∆G is negative, equivalently when ∆H − T∆S < 0.
    Enthalpy change of the system
    A negative ∆H favours feasibility because it lowers ∆G.
    Entropy change and the T∆S term
    The entropy term is written T∆S, so its sign follows ∆S: a positive ∆S gives a positive T∆S, and a negative ∆S gives a negative T∆S.
    Temperature dependence and threshold temperature
    Temperature scales the T∆S term, so a reaction with positive ∆H and positive ∆S becomes feasible only above a threshold temperature, while one with negative ∆H and negative ∆S is feasible only below a threshold.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart. The top node 'Feasibility of a process' branches into two nodes: 'Enthalpy change of system, ∆H' and 'Entropy term, T∆S'. The entropy node branches into 'Temperature T in kelvin scales T∆S' and 'Sign of T∆S follows sign of ∆S'. The enthalpy node, the temperature node and the sign node all lead into a node '∆G = ∆H − T∆S', which leads to 'Feasible when ∆G is negative'. That node branches into four outcomes: 'Negative ∆H favours feasibility', 'Positive ∆S favours feasibility', 'Positive ∆H with positive ∆S: feasible only above a threshold temperature', and 'Negative ∆H with negative ∆S: feasible only below a threshold temperature'.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Enthalpy and entropy: (d) explanation that the feasibility of a process depends upon the entropy change and temperature in the system, T∆S, and the enthalpy change of the system, ∆H

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge